Cabletron Systems SmartCell 6A000 Reference Manual page 17

Introduction
:"*dF˜s_•
6"•"hF›F• &F'4•az›apm
[ATM Address] ATM address assigned to the port,
client, or server according to ATM
Forum specifications.
[ClientNumber] Number of the client. Each client on
the switch must have a unique client
number. Client numbers are shared
between LAN emulation (LANE)
clients and IP/ATM (IP over ATM)
clients.
With [IndexNumber], [PortNumber], [Client Number], and other parameters that default to "ALL", unless you specify
a number at that input field, the switch gives ALL information pertaining to that parameter field.
Descriptions
:"*dF˜s_T
3zF•"›p• 6"•"hF›F•'—6F•ha''apm'
console [InputParameter]
command
(Privilege level this console command
allows:)
Administrator or All
6"•"hF›F•˜:"*dF˜'¨zd"m"›apm˜|%pm›am¤F=}
&F'4•az›apm˜:"*dF˜'¨zd"m"›apm
<whatyoutype>
="d¤F—)aFd=˜9a«F
13-20 bytes. Hex-based,
dot-decimal format separated by
colons/
59 characters
0 through 127/
Up to 3 characters
&F'4•az›apm
This section provides detailed descriptions of the command
(operator and switch attribute) and discusses what the
command does and how and when it is used. Other relevant
information appears here.
SmartCell 6A000/ZX-250 Reference Manual 1-7
&FO"¤d›
usually no default
ALL