Help Options; Other Reference Options - Cabletron Systems SmartCell 6A000 Reference Manual

Help Options

The console provides several levels of help for console commands. For example, to list the switch attributes that can
be used with a particular operator, enter the word
switch_prompt # help add
HELP ---- add
==============================================================================
add [ Alias | ATMRoute | BUSELAN | Community | ELAN | Interface |
IPATMClient | IPATMPVC | LANEClient | LECSELAN | LECSELANLEC |
LECSTLVSET | LESELAN | NetPrefix | PnniMetrics |
PnniSummaryAddress | PVC | Route | ServiceRegistry |
TrafficDescriptor | TrapCommunity ]
To get an explanation of a command and its parameters, enter the word
switch_prompt # ? add laneclient
Create LANE Client
==============================================================================
ClientNumber
LanName
ServerType
ServerAddress
IPAddress
NetMask
MTU
While entering a command, you can get help about an input parameter. To do so, enter a question mark (
parameter prompt.
switch_prompt # add atmroute
PortNumber(A1)
AtmAddress()
PrefixLength(104)
Index(0)
Type(Internal)
The type of reachability. Use Internal, Exterior, or Reject.
Type(Internal)
Scope(0)
MetricsTag(0)
Switch 4 #
+ÀiÃÃÊÍ...iÊ.ÃVÊŽißÊÍœÊL>VŽÊœÖÍÊœvÊ>˜ßÊVœ"">˜`ÊLivœÀiÊßœÖÊi˜ÍiÀÊÍ...iÊ•>ÃÍÊÜ>•Öi°
2p›F

Other Reference Options

You will find a list of acronyms, details about technical support, and an index at the back of this manual. The index
contains page references for all switch attribute sections, command parameters, operators, command descriptions and
command examples. There is also a table of commands at the end of this chapter. It lists all switch attributes by their
operator.
See the SmartCell 6A000 User Guide and SmartCell ZX-250 User Guide for details on how to use the switch. The user
guides contain information about switch configuration, maintenance, and SNMP (simple network management
protocol), as well as an overview of switch capabilities.
1-4 SmartCell 6A000/ZX-250 Reference Manual
(or
help
Local Client Number (0-127)
Name of the ELAN to join
Type of LANE Server [LECS, LES]
ATM Address of the LANE Server
IP Address of the Client
IP Netmask of the Client
MTU for the Client [1516, 9234, NONE]
: a3
: 39:00:00:00:00:00:00:00:00:00:14:72:80
:
:
: ?
: exterior
:
:
) followed by the operator.
?
(or ) before the command.
help ?
Introduction
) at the
?