Cabletron Systems SmartCell 6A000 Reference Manual page 228

Output Parameter
[Build Date]
[Software Image Size]
[Heap Space
Used/Total/%Free]
Descriptions
Operator Parameters/Permissions
modify [SwitchName] <switchname>
switchconfig [IPAddress] <ipaddress>
[IPNetMask] <ipnetmask>
Administrator
All
show
switchconfig
Examples
switch_prompt # modify switchconfig
SwitchName(switch_1)
IPAddress(200.30.72.122)
IPNetMask(255.255.255.0)
switch_prompt #
2-204 SmartCell 6A000/ZX-250 Reference Manual
Description
Software build date.
Binary image size.
Total heap space used, total memory
allocated to heap, and percent of free
memory.
: switch_2
: 1.1.1.202
: 255.255.255.128
Value/Field Size
day/month/date/ hr:min:sec year
bytes
bytes/bytes/%
Description
Runs automatically when you first configure the switch, then
prompts you for the required input. Enter
if you want to change any of the above
switchconfig
parameters after the initial switch configuration. Unless you
are experienced with configuring IP subnets, it is
recommended that you accept the IP netmask default.
Displays hardware and software configuration information
about the switch. It also includes auto-detect hardware
configuration information, such as number of switch boards
and memory, and software information such as the type and
version. Any future hardware or software changes will be
detected automatically when the switch is rebooted.
Console Commands
modify