Ipaddress - Cabletron Systems SmartCell 6A000 Reference Manual

IPAddress

Use IPAddress to change IP addresses of the Ethernet port and IP netmask on the switch.
Operator
modify
Parameters
Input Parameter Description
[IPAddress] IP address of the Ethernet port.
[IPNetMask] IP netmask of the Ethernet port. Defaults to
the appropriate netmask, based on the class of
the IP address. Calculated from the first two
high bits of the IP address, so it is either
255.0.0.0, 255.255.0.0, or 255.255.255.0.
Must be specified only if IP subnets are being
used.
Description
Operator Parameters/Permissions
modify [IPAddress] <ipaddress>
ipaddress [IPNetMask] <ipnetmask>
Administrator
Example
switch_prompt # modify ipaddress
IPAddress(200.30.72.122) : 1.1.1.11
IPNetMask(255.255.255.0) :
Confirm(y/n)?: y
Changing IP Address on System. Telnet Session (if any) will be lost.
switch_prompt #
2-60 SmartCell 6A000/ZX-250 Reference Manual
Value/Field Size
dot decimal/
7-15 characters
dot decimal/
7-15 characters
Description
Sets the IP address of the Ethernet port and the IP netmask.
You should accept the IP netmask default unless you are
experienced with configuring IP subnets.
Console Commands
Default
NONE
255.0.0.0,
255.255.0.0 or
255.255.255.0.