Cabletron Systems SmartCell 6A000 Reference Manual page 179

Console Commands
Descriptions
Operator Parameters/Permissions
show [PortNumber] <portnumber>
portstat
All
clear [PortNumber] <portnumber>
portstat
All
Examples
switch_prompt # show portstat
PortNumber(ALL)
Port ID OAM RM
Recvd Recvd
============================================================================
A1 0
A2 0
A3 0
A4 0
B1 0
B2 0
B3 0
B4(CPU) 0
switch_prompt #
Descriptions
Displays ATM statistics for a given port or all ports,
represented in number of cells. These statistics relate to
network resources management, congestion, and
performance issues. The counter has a 32-bit maximum
before it wraps around. Enter
obtain more details about the ports. Use clear portstat to reset
port statistic counters.
Clears the ATM cell counts and reinitializes all port statistics
to "0" for the specified port or all ports. This command clears
only the software values and does not flush the hardware
registers, which might have counts accumulated since the
registers were last read.
:
CLP1 Unk VC CLP1
Recvd Dropped Dropped
0 0 0
0 0 0
0 0 0
0 0 13839
0 0 0
0 0 0
0 0 0
0 0 0
show portstat /d
Total
Dropped
0 0
0 0
0 0
0 13839
0 0
0 0
0 0
0 0
SmartCell 6A000/ZX-250 Reference Manual 2-155
(detail) to