Page 1 SmartCell 6A000/ZX-250 Reference Manual 35 Industrial Way Rochester, NH 03866-5005 (603) 332-9400 Part Number 04-0044-03 Rev. A Order Number 9032537...
Page 2 Copyright 1998 by Cabletron, Inc., P.O. Box 5005, Rochester, NH03866-5005 All Rights Reserved Printed in the United States of America SmartCell 6A000/ZX-250 Reference Manual 04-0044-03 Rev. A Order # 9032537 SmartCell, SPECTRUM, LANVIEW, MicroMMAC, and BRIM are registered trademarks and Element Manager, EPIM, EPIMA, EPIM-F1, EPIM-F2, EPIM-F3, EPIM-T, EPIM-X, FOT-F, FOT-F3, HubSTACK, SEH, SEHI, and TMS-3 are trademarks of Cabletron, Inc.
Page 3: Revision History
REVISION HISTORY Document Name:SmartCell 6A000/ZX-250 Reference Manual Document Order Number: Order # 9032527 Document Part Number: 04-0044-03 Rev. A Author: Robert dePeyster Editor: Carre Gibson Date Revision October 1997 04-0044-02 Rev. A March 1998 04-0044-03 Rev. A Description Initial release...
Page 4 SmartCell 6A000/ZX-250 Reference Manual...
Page 5: Table Of Contents
List of Commands and Possible Switch Attributes ........
Page 6 Prompt ..............2-163 SmartCell 6A000/ZX-250 Reference Manual...
Page 7 Switch ........
Page 8 Index............I-1 viii SmartCell 6A000/ZX-250 Reference Manual...
Page 9: List Of Tables
Event ID Prefixes ..............B-3 SmartCell 6A000/ZX-250 Reference Manual ix...
Page 10 List of Tables SmartCell 6A000/ZX-250 Reference Manual...
Page 11: Introduction
1 INTRODUCTION This reference manual describes the console commands for the SmartCell 6A000 and SmartCell ZX-250 ATM switches. The two switches share a common console interface and are referred to in this manual as the SmartCell 6A000/ZX-250. Audience and Scope The manual is intended for network administrators and others responsible for maintaining the SmartCell 6A000/ZX-250.
Page 12: Sections
Sections Read "Switch Attribute" for an example and definition of the various sections under each switch attribute as well as a description of how the manual is organized. Each section begins with a switch attribute heading (for example, “PVCById”). Then come the details of relevant operators, parameters, and commands.
Page 13: Abbreviations
# You can, however, abbreviate the switch attribute to the extent that it is unique. For example, instead of typing show porttrafficcongestion, you can just type show portt. The same can be done with operators. Instead of typing modify, you can type mod.
Page 14: Help Options
There is also a table of commands at the end of this chapter. It lists all switch attributes by their operator. See the SmartCell 6A000 User Guide and SmartCell ZX-250 User Guide for details on how to use the switch. The user guides contain information about switch configuration, maintenance, and SNMP (simple network management protocol), as well as an overview of switch capabilities.
Page 15: Switch Attribute
Operators make the switch attribute work. Operators pertaining to each switch attribute are listed immediately below the “Operators” heading. The command is the switch attribute combined with the operator. A list of possible switch operators follows. You can use an alias when a word in parentheses appears. However, only the operators not in parentheses are used in this manual.
Page 16 Only one parameter table in a switch attribute section means either that switch attribute uses only input parameters or that the output parameters are identical to the input parameters. The heading of the table indicates which is the case. If the table heading says Input Parameter or Output Parameter, only input or output parameters apply to this switch attribute.
Page 17 IP/ATM (IP over ATM) clients. With [IndexNumber], [PortNumber], [Client Number], and other parameters that default to “ALL”, unless you specify a number at that input field, the switch gives ALL information pertaining to that parameter field. Descriptions :"*dF˜s_T &F’4•az›apm˜:"*dF˜'¨zd"m"›apm...
Page 18 Examples Examples are copied exactly from the switch console to show you what you should see. They appear at the end of each section in the same order as the operators are listed at the start of each section. There is no significance to the order in which the examples appear, except that show usually appears after the other command examples to demonstrate how a command can change a characteristic of the switch.
Page 19: List Of Commands And Possible Switch Attributes
(remove) Alarms Alias BUSELAN Client Events IPATMPVC LECSTLVPARAM LECSTLVSET NetPrefix PnniMetrics PVCById Route TrapCommunity BUSELAN Community IPATMPVC LANEClient LESELAN LECSELAN PnniSummaryAddress TrafficDescriptor TrapCommunity ATMRoute BUSClient Community ELAN LECSELAN LECSELANLEC LESClient LESELAN PnniSummaryAddress ServiceRegistry TrafficDescriptor SmartCell 6A000/ZX-250 Reference Manual 1-9...
Page 20 AlarmDisplay Alias CACServiceClassBw ConsoleTimeout IlmiTimers IPAddress LECSELAN LECSELANLEC MyNmAddr PnniInterface PnniPglElection PnniScopeMapping PortTrafficCongestion Prompt SSCOPConfig SwitchConfig TrustedNMS VCCMask 1-10 SmartCell 6A000/ZX-250 Reference Manual BUSELAN CACEqBwAllocScheme CoreDump EventDisplay IPATMClient LANEClient LECSTLVSET LESELAN PnniNode PnniNodeTimer PortConfig PortMode Rows SigTimer SwitchName SwitchTrafficCongestion Introduction...
Page 21 Switch Alias ATMRoute BUSLECStat BUSStat CACPortBw CACServiceClassBw ClientStats ClientVC CoreDump ELAN IlmiTimers IPATMARP LECS LECSELAN LECSTLVSET LECSVcc LESClient LESELAN MyNmAddr NetPrefix PnniMetrics PnniNeighbor PnniNode PnniNodeTimer PnniReachableAddress PnniScopeMapping PortConfig PortMode Privilege ServiceRegistry SigStatistics SVCById TrafficDescriptor TrapCommunity SmartCell 6A000/ZX-250 Reference Manual 1-11...
Page 22 Alias BUSStat PortStats disable/enable Disable/Enable exit Exit flush Alias Config history History passwd Passwd 1-12 SmartCell 6A000/ZX-250 Reference Manual Config LESStat Introduction...
Page 23 Introduction restart Client setup Switch shutdown Shutdown start LECS stop LECS update Firmware Ping SmartCell 6A000/ZX-250 Reference Manual 1-13...
Page 24 Introduction 1-14 SmartCell 6A000/ZX-250 Reference Manual...
Page 25: Console Commands
2 CONSOLE COMMANDS AlarmDisplay 2ÃiÊ"•>À“-ˆÃ«•>ßÊÍœÊi˜>L•iÉ`ˆÃ>L•iÊÍ…iÊ`ˆÃ«•>ßÊœvÊ>•>À“Ê“iÃÃ>}iÃÊœ˜ÊÍ…iÊVœ˜Ãœ•iÊÃVÀii˜° Operator modify, show Parameter ,mz¤›˜6"•"hF›F• &F’4•az›apm Q"•>À“-ˆÃ«•>ßR 0œ}}•iÃÊÍ…iÊ`ˆÃ«•>ßÊ#!ÊœÀÊ#44° Description 3zF•"›p• 6"•"hF›F•’˜—˜6F•ha’’apm’ modify [AlarmDisplay] <eventdisplay> alarmdisplay "`“ˆ˜ˆÃÍÀ>ÍœÀ "`“ˆ˜ˆÃÍÀ>ÍœÀ show alarmdisplay ="d¤F—)aFd=˜9a«F #!]Ê#44 &F’4•az›apm 0œ}}•iÃÊ`ˆÃ«•>ßÊœvÊ>•>À“Ê“iÃÃ>}iÃÊœ˜ÊÍ…iÊVœ˜Ãœ•iÊÃVÀii˜° -ˆÃ«•>ßÃÊÃÍ>ÍÖÃÊœvÊ>•>À“ÃÊ`ˆÃ«•>ß° SmartCell 6A000/ZX-250 Reference Manual 2-1 &FO"¤d›...
Page 26 Console Commands Examples switch_prompt # show alarmdisplay Alarm Display is OFF switch_prompt # switch_prompt # modify alarmdisplay AlarmDisplay[OFF] : on switch_prompt # switch_prompt # show alarmdisplay Alarm Display is ON switch_prompt # 2-2 SmartCell 6A000/ZX-250 Reference Manual...
Page 27: Alarms
[Index] <index> "`“ˆ˜ˆÃÍÀ>ÍœÀ show alarms [Index] <index> "•• Examples switch_prompt # show alarms Index(ALL) 33554652 000:00:32:238 --------------------------------------------------- LECS Operational switch_1 # delete alarms Index(ALL) switch_1 # show alarms Index(ALL) ="d¤F—)aFd=˜9a«F ä°°°">> &F’4•az›apm -i•iÍiÃÊ>˜Ê>•>À“ÊœÀÊ>••Ê>•>À“Ã° -ˆÃ«•>ßÃÊ>•>À“-Ã®ÊVÖÀÀi˜Í•ßÊ•œ}}i`° SmartCell 6A000/ZX-250 Reference Manual 2-3 &FO"¤d› ">>...
Page 28: Alias
Parameters˜ ,mz¤›˜6"•"hF›F• &F’4•az›apm Q"•ˆ>Ã!>“iR "•ˆ>ÃÊ˜>“i° Q"•ˆ>Ãi`.ÍÀˆ˜}R +œ˜Ãœ•iÊVœ““>˜`ÊÍœÊÝ…ˆV…Ê >•ˆ>ÃÊ>««•ˆiÃ° 3¤›z¤›˜6"•"hF›F• &F’4•az›apm Q7˜`iÞR .iµÖi˜ViÊ˜Ö“LiÀÊ>ÃÃˆ}˜i`ÊÍœÊ>•ˆ>ÃÊLßÊVœ˜Ãœ•i° Q"•ˆ>ÃÊ!>“iR .>“iÊ>ÃÊQ"•ˆ>Ã!>“iRÊˆ˜«ÖÍÊ«>À>“iÍiÀ° Q"•ˆ>Ãi`Ê+œ““>˜`R .>“iÊ>ÃÊQ"•ˆ>Ãi`.ÍÀˆ˜}RÊˆ˜«ÖÍÊ«>À>“iÍiÀ° 2-4 SmartCell 6A000/ZX-250 Reference Manual ="d¤F—)aFd=˜9a«F &FO"¤d› .ˆ˜}•iÊÝœÀ`Ê-˜œÊÃ«>ViÃ®ÊœvÊ +ˆ˜}Ê>•ˆ>ÃÊˆÃÊ«ÀiÃi˜ÍÊÝ…i˜Ê >•«…>˜Ö“iÀˆVÊV…>À>VÍiÀÃ°Ê ÃÝˆÍV…ÊˆÃÊÃ…ˆ««i`ÊvÀœ“ÊÍ…iÊ v>VÍœÀßÊ-«ˆ˜}Ê“i>˜ÃÊÃÍ>ÀÍÊ «ˆ˜}®° "˜ßÊÜ>•ˆ`ÊVœ“Lˆ˜>Íˆœ˜ÊœvÊ ˜É> œ«iÀ>ÍœÀÊ>˜`Ê>ÍÍÀˆLÖÍiÊ-vœÀÊ iÞ>“«•i]ÊÃ…œÝÊiÜi˜ÍÃ®°Ê0…iÊ >•ˆ>Ãi`ÊÃÍÀˆ˜}Ê“>ßÊ˜œÍÊVœ˜Í>ˆ˜Ê >˜œÍ…iÀÊ>•ˆ>Ã° Console Commands...
Page 29 # modify alias AliasName() NewAliasedString() Modifying Alias "spnni -> show pnniinterface" to "spnni -> sp" Confirm(y/n)?:y switch_prompt # &F’4•az›apm +Ài>ÍiÃÊ>˜Ê>•ˆ>Ã°Ê:œÖÊV>˜Ê…>ÜiÊÖ«ÊÍœÊ£xÊ>VÍˆÜiÊ >•ˆ>ÃiÃÊ-ˆ˜V•Ö`ˆ˜}Ê«ˆ˜}®° -i•iÍiÃÊ>˜Ê>•ˆ>Ã° -i•iÍiÃÊ>••Ê>•ˆ>ÃiÃÊ-ˆ˜V•Ö`ˆ˜}Ê«ˆ˜}®° +…>˜}iÃÊ>˜Ê>•ˆ>Ã° -ˆÃ«•>ßÃÊ>••Ê>•ˆ>ÃiÃ° : spnni : show pnniinterface : spnni : spnni : sp SmartCell 6A000/ZX-250 Reference Manual 2-5...
Page 30 # show alias AliasName(ALL) Alias List ============================================================================== Index Alias Name PING switch_prompt # 2-6 SmartCell 6A000/ZX-250 Reference Manual : Aliased Command : Start Ping : show pnninode Console Commands...
Page 31: Atmroute
7˜`iÞÊˆ˜ÍœÊÍ…iÊÃiÍÊœvÊ•ˆÃÍˆ˜}ÃÊœvÊVœ˜˜iVÍˆÜˆÍßÊ ÍœÊ>Ê}ˆÜi˜Ê>``ÀiÃÃÊ«ÀivˆÞÊvÀœ“ÊÍ…iÊÃÝˆÍV…° Q0ß«iR 0ß«iÊœvÊÀi>V…>Lˆ•ˆÍßÊvÀœ“ÊÍ…iÊÃÝˆÍV…ÊÍœÊÍ…iÊ >``ÀiÃÃÊ«ÀivˆÞ°Ê Q.Vœ«iR +!!7ÊÃVœ«iÊœvÊ>`ÜiÀÍˆÃi“i˜ÍÊ-•iÜi•ÊœvÊ+!!7Ê …ˆiÀ>ÀV…ß®ÊvÀœ“ÊÍ…iÊÃÝˆÍV…ÊÍœÊÍ…iÊ>``ÀiÃÃÊ «ÀivˆÞ° Q iÍÀˆVÃ0>}R 7˜`iÞÊˆ˜ÍœÊ•ˆÃÍˆ˜}ÊœvÊÍÀ>vvˆVÊ«>À>“iÍiÀÃÊÍ…>ÍÊ >««•ßÊÍœÊVœ˜˜iVÍˆÜˆÍßÊvÀœ“ÊÍ…iÊÃÝˆÍV…ÊÍœÊÍ…iÊ Ài>V…>L•iÊ>``ÀiÃÃÊ«ÀivˆÞ°Ê7vÊÍ…iÀiÊ>ÀiÊ˜œÊ «>À>“iÍiÀÃÊ>ÃÃœVˆ>Íi`ÊÝˆÍ…ÊÍ…ˆÃÊÀi>V…>L•iÊ >``ÀiÃÃÊ«ÀivˆÞ]ÊÍ…i˜ÊãiÀœÊˆÃÊÖÃi`°Ê ="d¤F—)aFd=˜9a«F &FO"¤d› "£°°°"{]Ê*£°°*Ï]Ê+£°°°+{]Ê "£ÊvœÀÊ>``Ê>˜`Ê -£°°°-{]ÊœÀÊ">>Ê-vœÀÊÃ…œÝÊ `i•iÍiÊœ«iÀ>ÍœÀÃ]Ê œ«iÀ>ÍœÀÊœ˜•ß® ">>ÊvœÀÊÃ…œÝÊ œ«iÀ>ÍœÀ ˜É> !#!. ä .ÞÍiÀˆœÀ 7˜ÍiÀ˜>• 7˜ÍiÀ˜>• -i•iVÍ 7˜Íi}iÀÃÊvÀœ“Êä†£ä{ ä ä SmartCell 6A000/ZX-250 Reference Manual 2-7...
Page 32 "˜Ê>``ÀiÃÃÊÃiµÖi˜ViÊ˜Ö“LiÀÊ}i˜iÀ>Íi`ÊLßÊÍ…iÊÃ…œÝÊ>Í“ÀœÖÍiÊVœ““>˜`° Q+œÀÍR .>“iÊ>ÃÊQ+œÀÍ!Ö“LiÀRÊˆ˜«ÖÍÊ«>À>“iÍiÀ° Q"0 Ê"``ÀiÃÃR .>“iÊ>ÃÊQ"0 "``ÀRÊˆ˜«ÖÍÊ«>À>“iÍiÀ° Q+ÀœÍœVœ•R -œÖÍˆ˜}Ê“iV…>˜ˆÃ“ÊÖÃi`ÊÍœÊ`iÍiÀ“ˆ˜iÊVœ˜˜iVÍˆÜˆÍßÊLiÍÝii˜ÊÍ…iÊÃÝˆÍV…Ê>˜`ÊÍ…iÊÀi>V…>L•iÊ >``ÀiÃÃÊ«ÀivˆÞ°Ê+œÃÃˆL•iÊÜ>•ÖiÃÊ>ÀiÊ#Í…iÀ]Ê>œV>•]Ê }“Í]Ê>˜`Ê+!!7° Q"`ÜiÀÍˆÃˆ˜}Ê!œ`iÊ7`R 7`i˜ÍˆvˆiÀÊœvÊÍ…iÊ˜œ`iÊ>`ÜiÀÍˆÃˆ˜}ÊÀi>V…>Lˆ•ˆÍßÊÍœÊÍ…iÊ>``ÀiÃÃÊ«ÀivˆÞ° Q"`ÜiÀÍˆÃˆ˜}Ê+œÀÍÊ7`R 7`i˜ÍˆvˆiÀÊœvÊÍ…iÊ«œÀÍÊÖÃi`ÊvÀœ“ÊÍ…iÊ>`ÜiÀÍˆÃˆ˜}Ê˜œ`iÊÍœÊÀi>V…ÊÍ…iÊ}ˆÜi˜Ê>``ÀiÃÃÊ«ÀivˆÞ° Q+!!7Ê.Vœ«iRÊ +!!7ÊÃVœ«iÊœvÊ>`ÜiÀÍˆÃi“i˜ÍÊ-•iÜi•ÊœvÊ+!!7Ê…ˆiÀ>ÀV…ß®ÊœvÊÀi>V…>Lˆ•ˆÍßÊvÀœ“ÊÍ…iÊÃÝˆÍV…ÊÍœÊ Í…iÊ>``ÀiÃÃÊ«ÀivˆÞ° Q7+Ê+>«>Lˆ•ˆÍßR 7˜`ˆV>ÍiÃÊÝ…iÍ…iÀÊœÀÊ˜œÍÊ7++ÃÊV>˜ÊLiÊiÃÍ>L•ˆÃ…i`ÊvÀœ“ÊÍ…iÊ>`ÜiÀÍˆÃˆ˜}Ê˜œ`iÊÍœÊÍ…iÊ Ài>V…>L•iÊ>``ÀiÃÃÊ«ÀivˆÞ° Q iÍÀˆVÃÊ0>}RÊ 7˜`iÞÊˆ˜ÍœÊÍ…iÊ•ˆÃÍˆ˜}ÊœvÊÍÀ>vvˆVÊ«>À>“iÍiÀÊÜ>•ÖiÃÊÍ…>ÍÊ>««•ßÊvœÀÊVœ˜˜iVÍˆÜˆÍßÊLiÍÝii˜ÊÍ…iÊ ÃÝˆÍV…Ê>˜`ÊÍ…iÊÀi>V…>L•iÊ>``ÀiÃÃÊ«ÀivˆÞ° Q+ÍÃiÊ7`R 4œÀÊÀi>V…>L•iÊ>``ÀiÃÃiÃÊ•i>À˜i`ÊÍ…ÀœÖ}…Ê+!!7]ÊÍ…ˆÃÊ«>À>“iÍiÀÊVœ˜Í>ˆ˜ÃÊÍ…iÊÜ>•ÖiÊœvÊÍ…iÊ +0..Êˆ`i˜ÍˆvˆiÀÊvœÀÊÍ…iÊ+0..ÊÍ…>ÍÊˆÃÊœÀˆ}ˆ˜>Íi`ÊLßÊÍ…iÊœÀˆ}ˆ˜>Íˆ˜}Ê˜œ`iÊ>˜`ÊVœ˜Í>ˆ˜ÃÊÍ…iÊ ˆ˜vœÀ“>Íˆœ˜Ê}ÀœÖ«-Ã®Ê`iÃVÀˆLˆ˜}ÊÍ…iÊÀi>V…>L•iÊ>``ÀiÃÃ°Ê4œÀÊÀi>V…>L•iÊ>``ÀiÃÃiÃÊ•i>À˜i`ÊLßÊ “i>˜ÃÊœÍ…iÀÊÍ…>˜Ê+!!7]ÊÍ…ˆÃÊ«>À>“iÍiÀÊˆÃÊÃiÍÊÍœÊãiÀœ° Q#«iÀÊ.Í>ÍÖÃR 7˜`ˆV>ÍiÃÊÝ…iÍ…iÀÊœÀÊ˜œÍÊÍ…iÊÀi>V…>L•iÊ>``ÀiÃÃÊ«ÀivˆÞÊˆÃÊœ«iÀ>Íˆœ˜>••ßÊÜ>•ˆ`Ê>˜`ÊÝ…iÍ…iÀÊˆÍÊ ˆÃÊ>`ÜiÀÍˆÃi`ÊLßÊÍ…ˆÃÊ˜œ`i°Ê+œÃÃˆL•iÊÜ>•ÖiÃÊ>Ài\Ê"`ÜiÀÍˆÃi`]Ê"VÍˆÜi]Ê>˜`Ê7˜>VÍˆÜi° 2-8 SmartCell 6A000/ZX-250 Reference Manual Console Commands...
Page 33 [ATMAddr] <atmaddress> [PrefixLength] <prefixlength> [AddressIndex] <index> "`“ˆ˜ˆÃÍÀ>ÍœÀ "•• show atmroute Examples switch_prompt # add atmroute PortNumber(A1) AtmAddress() PrefixLength(32) Index(0) Type(Internal) Scope(0) MetricsTag(0) switch_prompt # &F’4•az›apm "``ÃÊ>ÊÀœÖÍiÊÍœÊ>ÊÀi>V…>L•iÊ>``ÀiÃÃÊvÀœ“ÊÍ…iÊÃÝˆÍV…° -i•iÍiÃÊ>ÊÀœÖÍiÊÍœÊ>ÊÀi>V…>L•iÊ>``ÀiÃÃÊvÀœ“ÊÍ…iÊÃÝˆÍV…° -ˆÃ«•>ßÃÊÍ…iÊVœ˜vˆ}ÖÀi`ÊÀœÖÍiÃÊvÀœ“ÊÍ…iÊÃÝˆÍV…° : b2 : 20:01:02:03 : 32 SmartCell 6A000/ZX-250 Reference Manual 2-9...
Page 34 No. Port Route Address ================================================================================ 04:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00 23:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00 34:00:02:03:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00 38:01:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00 39:00:00:00:00:00:00:00:00:00:00:00:00:33:00:00:00:00:00 39:00:00:00:00:00:00:00:00:00:00:00:00:33:00:00:00:00:00 39:00:00:00:00:00:00:00:00:00:14:4a:00:00:20:d4:14:4a:00 40:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00 41:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00 47:00:01:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00 47:00:79:00:00:00:00:00:00:00:00:00:00:00:a0:3e:00:00:01 49:02:03:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00 switch_prompt # 2-10 SmartCell 6A000/ZX-250 Reference Manual : 20:01:02:03 : 32 Type Protocol MGMT MGMT MGMT MGMT MGMT PNNI PNNI MGMT MGMT MGMT PNNI...
Page 35: Busclient
[ELANNumber] <elannumber> busclient Value/Field Size 0-127 1-65279 Description Removes a specified client from the BUS on the specified ELAN. Displays information about all clients that have joined the BUS on the specified ELAN. SmartCell 6A000/ZX-250 Reference Manual 2-11 Default...
Page 36 LECId : 14 ATMAddress : 39:00:00:00:00:00:00:00:20:D4:14:11:80:00:20:D4:00:D6:C0:00 Confirm(y/n)? : y switch_prompt # switch_prompt # show busclient 0 Client table entries for ELAN =========================================================================== LECId VPI/VCI : 0/219 ATM Address : 39:00:00:00:00:00:00:00:20:D4:14:2F:00:00:20:D4:14:2F:00:00 switch_prompt # 2-12 SmartCell 6A000/ZX-250 Reference Manual ELAN000 Console Commands...
Page 37: Buselan
0-127, ALL 0 for add , delete , and modify operators; ALL for show operator ELAN000 PVC, SVC 802.3 (Ethernet), 802.3 802.5 (TokenRing) YES: VCC is PMP NO: VCC is PTP 1516 4544 (Token Ring) SmartCell 6A000/ZX-250 Reference Manual 2-13...
Page 38 : ELAN003 ATM Address : 39:00:00:00:00:00:00:00:20:D4:14:15:00:00:20:D4:14:15:03:02 Confirm(y/n)? switch_prompt # 2-14 SmartCell 6A000/ZX-250 Reference Manual Description Creates a BUS on a specified ELAN. If the corresponding LESELAN exists, then the added BUSELAN should have similar characteristics. Removes the BUS from a specified ELAN and drops clients connected to it.
Page 39 ELAN Number : 102 ELAN Name : ELAN102 ATM Address : 39:00:00:00:00:00:00:00:20:D4:14:15:00:00:20:D4:14:15:66:02 Max Frame Size : 4544 Connection Method: SVC Distribute VPI/VCI: 0/2423 ELAN Type : 802.5 Multipoint : YES switch_prompt # : 802.5 : 4544 SmartCell 6A000/ZX-250 Reference Manual 2-15...
Page 40: Buslecstat
Number of multicast and broadcast and unknown forward requests received by the BUS from this LEC. [Forwards] Number of requests forwarded by the BUS from this LEC. [Discards] Number of requests discarded by the BUS from this LEC. 2-16 SmartCell 6A000/ZX-250 Reference Manual Console Commands Value/Field Size Default 0-127 0-65279...
Page 42: Busstat
Number of multicast frames received by the BUS. [Frame Timeouts] Number of frames dropped by the BUS due to timeout. [VCC Rejects] Number of frames rejected because VCC is not available. 2-18 SmartCell 6A000/ZX-250 Reference Manual Console Commands Value/Field Size Default...
Page 43 # clear busstat ELANNumber(ALL): Clearing ALL BUS ELAN Statistics Confirm(y/n)?:y switch_prompt # Description Displays BUS statistics for the specified ELAN or for all ELANs. Clears BUS statistics for the specified ELAN or for all ELANs. SmartCell 6A000/ZX-250 Reference Manual 2-19...
Page 44: Caceqbwallocscheme
"••œV>Íˆœ˜ÊÃV…i“iÊvœÀÊ Vœ˜˜iVÍˆœ˜Ê>`“ˆÃÃˆœ˜° Q.iÀÜˆVi+>Íi}œÀßR .iÀÜˆViÊV>Íi}œÀß° Descriptions 3zF•"›p• 6"•"hF›F•’˜—˜6F•ha’’apm’ modify [PortNumber] <portnumber> caceqbwallocscheme [ServiceCategory] <servicecategory> [AllocScheme] <allocscheme> "`“ˆ˜ˆÃÍÀ>ÍœÀ "`“ˆ˜ˆÃÍÀ>ÍœÀ show caceqbwallocscheme 2-20 SmartCell 6A000/ZX-250 Reference Manual ="d¤F—)aFd=˜9a«F &FO"¤d› ">>]Ê"£°°°"{]Ê*£°°°*Ï]Ê "£ÊvœÀÊ“œ`ˆvßÊœ«iÀ>ÍœÀ]Ê +£°°°+{]Ê-£°°°-{]Ê">> ">>ÊvœÀÊÃ…œÝÊœ«iÀ>ÍœÀ +#!Ê-Vœ˜ÃiÀÜ>ÍˆÜi® >7*Ê-•ˆLiÀ>•® #-Ê-“œ`iÀ>Íi® -07*-Ê !-07*- "*- &F’4•az›apm .iÍÃÊ>••œV>Íˆœ˜ÊÃV…i“i° -ˆÃ«•>ßÃÊ>••œV>Íˆœ˜ÊÃV…i“i° Console Commands...
Page 45 Console Commands Examples switch_prompt # modify caceqbwallocscheme PortNumber(A1) : A1 ServiceCategory(CBR) : ubr AllocScheme(LIBERAL) : liberal switch_prompt # show caceqbwallocscheme Executing this command : show cacEqBwAllocScheme PortNumber(ALL) =========================================================== Port# RT-VBR =========================================================== B4(CPU) Alloc Scheme NRT-VBR SmartCell 6A000/ZX-250 Reference Manual 2-21...
Page 46: Cacinfo
3¤›z¤›˜6"•"hF›F• &F’4•az›apm Q0œÍ>•Ê*8R "Ü>ˆ•>L•iÊ«…ßÃˆV>•Ê•ˆ˜ŽÊL>˜`Ýˆ`Í…Ê-ˆ˜ÊL>˜`Ýˆ`Í…ÊÖ˜ˆÍÃÊÃ«iVˆvˆi`Ê>ÃÊˆ˜«ÖÍÊ«>À>“iÍiÀ®° Q0œÍ>•Ê*8Ê"••œV>Íi`R *>˜`Ýˆ`Í…Ê>••œV>Íi`Êœ˜ÊÍ…ˆÃÊ«œÀÍ° Q.iÀÜˆVi+>Íi}œÀßR .iÀÜˆViÊV>Íi}œÀˆiÃÊÃÖ««œÀÍi`Ê>Ài\Ê+*-Ê-Vœ˜ÃÍ>˜ÍÊLˆÍÊÀ>Íi®]Ê2*-Ê-Ö˜Ã«iVˆvˆi`ÊLˆÍÊÀ>Íi®]Ê -07*-Ê-Ài>•Íˆ“iÊÜ>Àˆ>L•iÊLˆÍÊÀ>Íi®]Ê!-07*-Ê-˜œ˜†Ài>•Íˆ“iÊÜ>Àˆ>L•iÊLˆÍÊÀ>Íi®]Ê"*-Ê ->Ü>ˆ•>L•iÊLˆÍÊÀ>Íi®° Description 3zF•"›p• 6"•"hF›F•’˜—˜6F•ha’’apm’ show cacinfo [PortNumber] <portnumber> [BandWidthUnit] <bandwidthunit> "`“ˆ˜ˆÃÍÀ>ÍœÀ 2-22 SmartCell 6A000/ZX-250 Reference Manual ="d¤F—)aFd=˜9a«F &FO"¤d› ">>]Ê"£°°°"{]Ê*£°°°*Ï]Ê "£ +£°°°+{]Ê-£°°°-{ ++.Ê-Vi••ÃÊ«iÀÊÃiVœ˜`® !#!. =*.Ê-=LˆÍÃÊ«iÀÊÃiVœ˜`® *.Ê- LˆÍÃÊ«iÀÊÃiVœ˜`® +.-Ê-«iÀVi˜Í>}i® &F’4•az›apm -ˆÃ«•>ßÃÊ+"+ÊÃÍ>ÍˆÃÍˆVÃ° Console Commands...
Page 47 Console Commands Example switch_prompt # show cacinfo PortNumber(ALL) BandWidthUnit(CPS) ===================================================================== Port# Total Total BW Allocated ===================================================================== 264186 264186 264186 264186 264186 264186 264186 switch_prompt # : ALL : CPS BwAlloc For ServiceCategory RT-VBR NRT-VBR SmartCell 6A000/ZX-250 Reference Manual 2-23...
Page 48: Cacportbw
&F’4•az›apm Q+œÀÍ!Ö“LiÀR +œÀÍÊ˜Ö“LiÀÊœ˜ÊÍ…iÊÃÝˆÍV…° 3¤›z¤›˜6"•"hF›F• Q >Þ*>˜`Ýˆ`Í…7˜ L«ÃR Q >Þ*>˜`Ýˆ`Í…7˜=L«ÃR Q >Þ*>˜`Ýˆ`Í…7˜+«ÃR Q >Þ*>˜`Ýˆ`Í…7˜+iÀR Q ˆ˜*>˜`Ýˆ`Í…7˜ L«ÃR Q ˆ˜*>˜`Ýˆ`Í…7˜=L«ÃR Q ˆ˜*>˜`Ýˆ`Í…7˜+«ÃR Q ˆ˜*>˜`Ýˆ`Í…7˜+iÀR 2-24 SmartCell 6A000/ZX-250 Reference Manual ="d¤F—)aFd=˜9a«F "£°°°"{]Ê*£°°°*Ï]Ê+£°°°+{]Ê -£°°°-{]Ê">> &F’4•az›apm >Þˆ“Ö“ÊL>˜`Ýˆ`Í…Ê>••œV>Íi`ÊÍœÊÍ…ˆÃÊ«œÀÍÊˆ˜Ê i}>*ˆÍÃÊ«iÀÊÃiVœ˜`° >Þˆ“Ö“ÊL>˜`Ýˆ`Í…Ê>••œV>Íi`ÊÍœÊÍ…ˆÃÊ«œÀÍÊˆ˜Ê=ˆ•œ*ˆÍÃÊ«iÀÊÃiVœ˜`° >Þˆ“Ö“ÊL>˜`Ýˆ`Í…Ê>••œV>Íi`ÊÍœÊÍ…ˆÃÊ«œÀÍÊˆ˜ÊVi••ÃÊ«iÀÊÃiVœ˜`° >Þˆ“Ö“ÊL>˜`Ýˆ`Í…Ê>••œV>Íi`ÊÍœÊÍ…ˆÃÊ«œÀÍÊˆ˜Ê«iÀVi˜Í>}i° ˆ˜ˆ“Ö“ÊL>˜`Ýˆ`Í…Ê>••œV>Íi`ÊÍœÊÍ…ˆÃÊ«œÀÍÊˆ˜Ê i}>*ˆÍÃÊ«iÀÊÃiVœ˜`° ˆ˜ˆ“Ö“ÊL>˜`Ýˆ`Í…Ê>••œV>Íi`ÊÍœÊÍ…ˆÃÊ«œÀÍÊˆ˜Ê=ˆ•œ*ˆÍÃÊ«iÀÊÃiVœ˜`° ˆ˜ˆ“Ö“ÊL>˜`Ýˆ`Í…Ê>••œV>Íi`ÊÍœÊÍ…ˆÃÊ«œÀÍÊˆ˜ÊVi••ÃÊ«iÀÊÃiVœ˜`°...
Page 49 Console Commands Description 3zF•"›p• 6"•"hF›F•’˜—˜6F•ha’’apm’ "`“ˆ˜ˆÃÍÀ>ÍœÀ show CACPortBw Example switch_prompt # show cacportbw PortNumber(ALL) =============================================================================== Port# Max Bandwidth Mbps Kbps =============================================================================== 158208 422668 switch_prompt # &F’4•az›apm -ˆÃ«•>ßÃÊ«œÀÍÊL>˜`Ýˆ`Í…° Min Bandwidth Mbps Kbps SmartCell 6A000/ZX-250 Reference Manual 2-25...
Page 50: Cacserviceclassbw
Q >Þ*>˜`Ýˆ`Í…7˜+iÀVi˜Í>}i -07*-R >••œV>Íi`ÊvœÀÊ-07*-° Q >Þ*>˜`Ýˆ`Í…7˜+iÀVi˜Í>}i !-07*-R >••œV>Íi`ÊvœÀÊ!-07*-° Q >Þ*>˜`Ýˆ`Í…7˜+iÀVi˜Í>}i 2*-R >••œV>Íi`ÊvœÀÊ2*-° Q >Þ*>˜`Ýˆ`Í…7˜+iÀVi˜Í>}i "*-R >••œV>Íi`ÊvœÀÊ"*-° Q >Þ*>˜`Ýˆ`Í…R >••œV>Íi`ÊÍœÊÍ…ˆÃÊ«œÀÍ° 2-26 SmartCell 6A000/ZX-250 Reference Manual ="d¤F—)aFd=˜9a«F "£°°°"{]Ê*£°°°*Ï]Ê+£°°°+{]Ê -£°°°-{]Ê">> 2*-Ê -07*- !-07*-Ê "*- ">>Ê-vœÀÊÃ…œÝÊœ«iÀ>ÍœÀÊœ˜•ß® >Þˆ“Ö“ÊL>˜`Ýˆ`Í…Ê =iÀœÊœÀÊ«œÃˆÍˆÜiÊˆ˜Íi}iÀ >Þˆ“Ö“ÊL>˜`Ýˆ`Í…Ê =iÀœÊœÀÊ«œÃˆÍˆÜiÊˆ˜Íi}iÀ >Þˆ“Ö“ÊL>˜`Ýˆ`Í…Ê =iÀœÊœÀÊ«œÃˆÍˆÜiÊˆ˜Íi}iÀ >Þˆ“Ö“ÊL>˜`Ýˆ`Í…Ê...
Page 51 #show cacServiceClassBW Executing this command : show cacServiceClassBw PortNumber(ALL) SeriveCategory(UBR) =========================================== Port# Max Bandwidth Mbps Kbps =========================================== switch_prompt # &F’4•az›apm .iÍÃÊL>˜`Ýˆ`Í…Ê«iÀÊÃiÀÜˆViÊV>Íi}œÀß° -ˆÃ«•>ßÃÊL>˜`Ýˆ`Í…Ê«iÀÊÃiÀÜˆViÊV•>ÃÃ° : B1 : 25 : 25 : 25 : 25 : A1 : CBR SmartCell 6A000/ZX-250 Reference Manual 2-27...
Page 52: Client
Client Use Client to determine all or local LANE (LAN emulation) and IP/ATM (IP over ATM) clients on the switch. Operators delete, restart, show Parameters Input Parameter Description [ClientNumber] Number of the local client. In the Output Parameter table below, (detailed) command.
Page 53 Enter to confirm that the client(s) have restarted. client Displays the details of a client on the switch. You can obtain more details of all the clients on the switch by adding the end of the command. For example,...
Page 54 90.1.1.124 switch_prompt # switch_prompt # show client /s ClientNumber(ALL) Client Type IP Address ============================================================================ LANE 90.1.1.186 IP/ATM 90.1.1.124 switch_prompt # 2-30 SmartCell 6A000/ZX-250 Reference Manual Server Type Server Conn Status LECS Established Operational Local Established Operational Server Type Server Conn...
Page 55 # show client 3 /d IP/ATM Client 3 ============================================================================ Client State : Operational Client Address : 39:00:00:00:00:00:00:00:00:00:14:15:00:00:00:5A:01:01:7C:00 Server : is local Server Connection: Established : 9180 IP Address : 90.1.1.124 IP NetMask : 255.0.0.0 switch_prompt # SmartCell 6A000/ZX-250 Reference Manual 2-31...
Page 56: Clientarp
IP address of IP/ATM destination client. [ATM Address] ATM address of either LANE or IP/ATM destination client. Description Operator Parameters/Permissions show [ClientNumber] <clientnumber> clientarp 2-32 SmartCell 6A000/ZX-250 Reference Manual Value/Field Size 0-127 Description Displays details about LANE or IP/ATM client ARP entries. Console Commands Default...
Page 57 Console Commands Example switch_prompt # show clientarp ClientNumber(ALL) : LANE Client 0 ARP Table MAC Address ATM Address ============================================================================= 00:20:D4:14:15:00 39:00:00:00:00:00:00:00:20:D4:14:15:00:00:20:D4:14:15:00:02 IP/ATM Client 3 ARP Table IP Address ATM Address ========================================================================================= 10.1.1.1 39:00:00:00:00:00:00:00:20:D4:14:15:00:00:20:D4:14:2F:00:00:0A:01:01:02:00 switch_prompt # SmartCell 6A000/ZX-250 Reference Manual 2-33...
Page 58: Clientstat
[Unicast Packets] (</d>) [Multicast Packets] (</d>) [Broadcast Packets] (</d>) [Error Packets] (</d>) 2-34 SmartCell 6A000/ZX-250 Reference Manual Description Number of the client. appears next to parameters that are available only through the (</d>) Description Type of client. Number of packets received.
Page 59 IP/ATM interface client on the switch. Some output parameters are different for LANE and IP/ATM clients. In the parameter table above, it is stated in parentheses ((LANE) or (IP/ATM)) after that parameter if it applies only to that type of client. SmartCell 6A000/ZX-250 Reference Manual 2-35...
Page 60 Dropped Packets IP/ATM Statistics ARP Requests Sent ARP Replies Rcvd ARP Requests Rcvd ARP Replies Sent ARP Unreachables ARP NAKs 2-36 SmartCell 6A000/ZX-250 Reference Manual for all clients, an IP/ATM client, and a LANE client. (</d>) RxOctets TxOctets Console Commands...
Page 61 Unicast Packets Multicast Packets Broadcast Packets Error Packets Dropped Packets LAN Emulation Statistics ARP Requests Sent ARP Replies Rcvd ARP Requests Rcvd ARP Replies Sent Ctrl Frames Sent Ctrl Frames Rcvd SVC Failures switch_prompt # SmartCell 6A000/ZX-250 Reference Manual 2-37...
Page 62: Clientvc
MAC address of the client. [VPI/VCI] VPI/VCI (virtual path/channel identifier) values of control direct VCC (virtual channel connection) or multicast send VCC. [ATM Address] ATM address of the client. 2-38 SmartCell 6A000/ZX-250 Reference Manual Console Commands Value/Field Size Default 0-127...
Page 63 ARP mapping details. For IP/ATM, the associated IP address appears, while for LANE, the associated MAC address appears. The associated address is what is located at the other end of the VC. SmartCell 6A000/ZX-250 Reference Manual 2-39...
Page 64: Community
Use Community to group NMS (network management system) hosts by privilege level. Hosts are collectively called communities, and their privilege level determines the type of information access permitted by the switch. The switch provides access to the information only if the request comes from a community configured with the necessary privileges.
Page 65 Displays all the communities that are configured on the switch. : boris : 90.1.1.1 IP Address Privilege 0.0.0.0 READ 90.1.1.1 READ 0.0.0.0 READ 0.0.0.0 WRITE : boris : 90.1.1.1 IP Address Privilege 0.0.0.0 READ 0.0.0.0 READ 0.0.0.0 WRITE SmartCell 6A000/ZX-250 Reference Manual 2-41...
Page 66: Config
Description Operator Parameters/Permissions Administrator clear config 2-42 SmartCell 6A000/ZX-250 Reference Manual command. See page 200. backup switch Value/Field Size Description Erases all switch configuration information, including Ethernet interface address, VLAN and ELAN configurations, signaling configuration, port configurations, and so on.
Page 67 Console Commands Example switch_prompt # clear config You should backup your configuration using the "backup switch" command, in case you want to recover this configuration Continuing will permanently erase the current switch configuration, and requires a switch reboot. Are you sure this is what you want to do? Confirm(y/n)?:y Configuration cleared.
Page 68: Consoletimeout
You are about to disable Console Timeout Confirm (y/N)? : y switch_prompt # switch_prompt # show consoletimeout Console Timeout in minutes ============================================================================== ConsoleTimeout : OFF switch_prompt # 2-44 SmartCell 6A000/ZX-250 Reference Manual Console Commands ="d¤F—)aFd=˜9a«F &FO"¤d› £†ÈäÊ“ˆ˜°Ê.iÍÍˆ˜}ÊVœ˜Ãœ•iÊ äÊ-#44® Íˆ“iœÖÍÊÍœÊäÊÍœ}}•iÃÊVœ˜Ãœ•iÊ Íˆ“iœÖÍÊ#44° &F’4•az›apm .iÍÃÊVœ˜Ãœ•iÊÍˆ“iœÖÍ°...
Page 69: Coredump
Console Commands CoreDump 2ÃiÊ+œÀi-Ö“«ÊÍœÊ`Ö“«ÊÍ…iÊÃßÃÍi“Ê++2Ê>˜`ÉœÀÊVœ““œ˜Ê--" Êˆ˜ÊÍ…iÊiÜi˜ÍÊœvÊ>ÊÃßÃÍi“Êv>ˆ•ÖÀi°Ê0…iÊVœÀiÊˆÃÊ`Ö“«i`ÊÍœÊ >Êvˆ•iÊÃ«iVˆvˆi`Êœ˜Ê>Ê•œV>•Ê.Í…iÀ˜iÍÊ…œÃÍ°Ê0œÊÖÃiÊ+œÀi-Ö“«]ÊÍ…iÊ.Í…iÀ˜iÍÊ…œÃÍÊ“ÖÃÍÊÀÖ˜Ê040+ÊÃiÀÜiÀÊÃœvÍÝ>Ài]Ê>˜`ÊßœÖÊ “ÖÃÍÊ…>ÜiÊÝÀˆÍiÊ>VViÃÃÊÍœÊÍ…iÊ040+Ê`ˆÀiVÍœÀß° Operator modify, show Parameters ,mz¤›˜6"•"hF›F•’ &F’4•az›apm Q.˜>L•i+œÀi-Ö“«R .˜>L•iÃÊVœÀiÊ`Ö“«° Q.iÀÜiÀ7+R 7+Ê>``ÀiÃÃÊœvÊ…œÃÍÊÍœÊÝ…ˆV…ÊÍ…iÊVœÀiÊˆÃÊ`Ö“«i`° Q+œÀi-Ö“«4ˆ•iR 4Ö••Ê«>Í…˜>“iÊœvÊÍ…iÊvˆ•iÊÍœÊÝ…ˆV…ÊÍ…iÊVœÀiÊˆÃÊ `Ö“«i`° QÖÃiÀ!>“iR >œ}ˆ˜Ê˜>“iÊœ˜ÊÍ…iÊ…œÃÍÊÍœÊÝ…ˆV…ÊÍ…iÊVœÀiÊˆÃÊ `Ö“«i`°ÊÊÊ0…iÊÖÃiÀÊÃ…œÖ•`Ê…>ÜiÊÝÀˆÍiÊ>VViÃÃÊÍœÊ Í…iÊ`ˆÀiVÍœÀßÊœ˜ÊÍ…iÊ…œÃÍÊÃ«iVˆvˆi`° Q2ÃiÀ+>ÃÃÝœÀ`R +>ÃÃÝœÀ`Êœ˜ÊÍ…iÊ…œÃÍ° ="d¤F—)aFd=˜9a«F &FO"¤d› :Ê-:..® !Ê-!#® ˜É> ˜É> ˜É> ˜É> SmartCell 6A000/ZX-250 Reference Manual 2-45...
Page 70 # modify coredump EnableCoreDump(N) ServerIP() :204.95.77.240 CoreDumpFile() :/tftpboot/ssubrama/core userName() :ssubrama UserPassword() :password switch_prompt # show coredump CoreDumpEnabled CoreDumpServerIP 204.95.77.240 CoreDumpFile /tftpboot/ssubrama/core 2-46 SmartCell 6A000/ZX-250 Reference Manual Console Commands &F’4•az›apm .˜>L•iÃÊVœÀiÊ`Ö“«°Ê#˜ViÊi˜>L•i`]ÊÍ…iÊVœÀiÊˆÃÊ`Ö“«i`Ê ÍœÊÍ…iÊvˆ•iÊÃ«iVˆvˆi`Êˆ˜ÊÍ…iÊiÜi˜ÍÊœvÊ>ÊÃßÃÍi“Êv>ˆ•ÖÀi°Ê0…iÊ VœÀiÊ`Ö“«ÊÍ>ŽiÃÊ>LœÖÍÊvˆÜiÊ“ˆ˜ÖÍiÃ°Ê"vÍiÀÝ>À`Ã]ÊÍ…iÊ ÃÝˆÍV…ÊˆÃÊÀiLœœÍi`° 0…iÊVœÀiÊˆÃÊ`Ö“«i`ÊÍœÊÍÝœÊvˆ•iÃ]Êœ˜iÊVœ˜Í>ˆ˜ˆ˜}Ê++2Ê “i“œÀßÊ-core_cpu®]ÊÍ…iÊœÍ…iÀÊVœ““œ˜Ê“i“œÀßÊ -core_cmn®°Ê:œÖÊV>˜ÊÃi˜`ÊÍ…iÃiÊvˆ•iÃÊÍœÊ+>L•iÍÀœ˜Ê VÖÃÍœ“iÀÊÃÖ««œÀÍÊvœÀÊ>˜>•ßÃˆÃ° 0…iÊ“œ`ˆvßÊVœÀi`Ö“«ÊVœ““>˜`ÊÖÃiÃÊ40+ÊÍœÊVÀi>ÍiÊ Í…iÊcore_cpuÊ>˜`Êcore_cmnÊvˆ•iÃ°Ê7vÊÍ…iÊ…œÃÍÊ`œiÃÊ ˜œÍÊÀÖ˜Ê40+]ÊVÀi>ÍiÊÍ…iÃiÊvˆ•iÃÊ“>˜Ö>••ßÊLivœÀiÊ iÞiVÖÍˆ˜}ÊÍ…iÊ“œ`ˆvßÊVœÀi`Ö“«ÊVœ““>˜`°ÊÊ.˜ÃÖÀiÊ Í…iÊvˆ•iÃÊ…>ÜiÊÝÀˆÍiÊ>VViÃÃÊvœÀÊiÜiÀßœ˜i°...
Page 71: Elan
Console Commands ELAN Use ELAN (emulated local area network) to create or delete ELANs on the switch. This is a quick configuration method of managing ELAN server entries within one command. For details of how to create or delete these entries individually, see “BUSELAN”, “LECSELAN”, and “LESELAN”.
Page 72 [ELANNumber] <elannumber> Administrator show elan [ELANNumber] <elannumber> 2-48 SmartCell 6A000/ZX-250 Reference Manual Description Quickly configures the switch. This command adds the ELAN entry in all three databases (BUSELAN, LESELAN, and LECSELAN) and activates the ELAN. Quickly configures the switch. This removes a specific ELAN.
Page 73 ELAN Number ELAN Name : ELAN000 LES Address : 39:00:00:00:00:00:00:00:20:D4:14:22:80:00:20:D4:14:22:80:02 Max Frame Size : 1516 Connection Method : SVC Distribute VPI/VCI: 0/32 Distribute Method: PROXY LAN Type : 802.3 Multipoint : YES switch_prompt # : 11 SmartCell 6A000/ZX-250 Reference Manual 2-49...
Page 74 ELAN Number LECS Address : 39:00:00:00:00:00:00:00:20:D4:14:22:80:00:20:D4:14:22:80:01 LES Address : 39:00:00:00:00:00:00:00:20:D4:14:22:80:00:20:D4:14:22:84:02 ELAN Name : ELAN004 ELAN Type : 802.3 : 1516 Connection Method: SVC Distribute VPI/VCI: 0/147 Distribute Method: PROXY Multipoint : YES switch_prompt # 2-50 SmartCell 6A000/ZX-250 Reference Manual Console Commands...
Page 75: Eventdisplay
# show eventdisplay Event Display is ON switch_1 # switch_1 # modify eventdisplay EventDisplay(ON) switch_1 # switch_1 # show eventdisplay Event Display is OFF switch_1 # ="d¤F—)aFd=˜9a«F #!]Ê#44 &F’4•az›apm 0œ}}•iÃÊ`ˆÃ«•>ßÊœvÊiÜi˜ÍÊ“iÃÃ>}iÃÊœ˜ÊÍ…iÊVœ˜Ãœ•iÊÃVÀii˜° -ˆÃ«•>ßÃÊÃÍ>ÍÖÃÊœvÊiÜi˜ÍÃÊ`ˆÃ«•>ß° : off SmartCell 6A000/ZX-250 Reference Manual 2-51 &FO"¤d›...
Page 76: Events
Events 2ÃiÊ.Üi˜ÍÃÊÍœÊ`ˆÃ«•>ßÊœÀÊ`i•iÍiÊiÜi˜ÍÃÊVÖÀÀi˜Í•ßÊ•œ}}i`°Ê!œÍiÊÍ…>ÍÊiÜi˜ÍÃÊ>ÀiÊ˜œÍÊ«iÀÃˆÃÍi˜ÍÊœ˜ÊÀiLœœÍÊ->ÀiÊ˜œÍÊÀiÍ>ˆ˜i`Êˆ˜Ê Í…iÊ•œ}®° Operators delete, show Parameter ,mz¤›˜6"•"hF›F• &F’4•az›apm Q7˜`iÞR 0…iÊˆ˜`iÞ-iÃ®ÊœvÊÍ…iÊiÜi˜ÍÃÊ ßœÖÊÝ>˜ÍÊÍœÊ`ˆÃ«•>ßÊœÀÊ `i•iÍi° Description 3zF•"›p• 6"•"hF›F•’˜—˜6F•ha’’apm’ delete events [Index] <index> "`“ˆ˜ˆÃÍÀ>ÍœÀ show events [Index] <index> "`“ˆ˜ˆÃÍÀ>ÍœÀ 2-52 SmartCell 6A000/ZX-250 Reference Manual ="d¤F—)aFd=˜9a«F &FO"¤d› ä°°°">> ">> &F’4•az›apm -i•iÍiÃÊ>˜ÊiÜi˜ÍÊœÀÊ>••ÊiÜi˜ÍÃ° -ˆÃ«•>ßÃÊiÜi˜Í-Ã®ÊVÖÀÀi˜Í•ßÊ•œ}}i`° Console Commands...
Page 77 MINOR EVENT --------------------------------------------------- Sendto failed for IP address 206.61.231.153 33554656 MINOR EVENT --------------------------------------------------- Sendto failed for IP address 206.61.231.153 33554656 MINOR EVENT --------------------------------------------------- Sendto failed for IP address 206.61.231.153 001:27:50:708 001:27:51:612 001:27:51:728 001:27:53:683 001:27:50:708 001:27:51:612 001:27:53:683 SmartCell 6A000/ZX-250 Reference Manual 2-53...
Page 78: Exit
[exit] <exit> Example switch_prompt # exit Exiting SmartCell 2X Command Console SmartCell 2X version 1.2(c) Cabletron Systems, Inc. 2-54 SmartCell 6A000/ZX-250 Reference Manual at the switch prompt. exit Description This command closes your console connection. Enter this command when you are finished with a console session. If you do not exit your session, the switch remains unavailable to anyone else.
Page 79: Firmware
Console Commands Firmware Use Firmware to re-program the switch application software when you want to perform a switch upgrade. Operator update Parameters Input Parameter Description [ServerIP] IP address of server with the updated image files. [Path] Full pathname from server (directory) to image files.
Page 80 Verifying bootfile server/server.ima on 204.95.77.240...passed. Erasing Flash. Using TFTP to get and program bootfile server/server.ima from 204.95.77.240. 2787K (2854508 bytes) received. Flash update succeeded. You will have to reboot for the new image to take effect. SmartCell ZX # 2-56 SmartCell 6A000/ZX-250 Reference Manual...
Page 81: History
It also displays an index number you can select to invoke the listed command. To repeat any of the commands listed by history, type !<indexnumber> repeat in the following example, type passwd SmartCell 6A000/ZX-250 Reference Manual 2-57 . For example, to...
Page 82: Ilmitimers
LivœÀiÊ7> 7ÊVœ˜˜iVÍˆÜˆÍßÊˆÃÊ`iV•>Ài`Ê•œÃÍ° Description 3zF•"›p• 6"•"hF›F•’˜—˜6F•ha’’apm’ modify ilmitimers [PortNumber] <portnumber> [Timer-S] <timers> [Timer-T] <timert> [Factor-K] <factork> "`“ˆ˜ˆÃÍÀ>ÍœÀ show ilmitimers [PortNumber] <portnumber> "•• 2-58 SmartCell 6A000/ZX-250 Reference Manual Console Commands ="d¤F—)aFd=˜9a«F &FO"¤d› "£°°°"{]Ê*£°°°*{]Ê+£°°°+{]Ê ">>ÊvœÀÊÃ…œÝÊ -£°°°-{]Ê">> œ«iÀ>ÍœÀ £†ÈxxÏx £ ä†ÈxxÏx ä†ÈxxÏx &F’4•az›apm .iÍÃÊ7> 7ÊÍˆ“iÀÃÊœ˜Ê>Ê«œÀÍ°...
Page 83 Console Commands Examples switch_prompt # modify ilmitimers PortNumber(ALL) : A1 Timer-S(1) Timer-T(5) Factor-K(4) switch_prompt # switch_prompt # show ilmitimers Port Timer S TimerT FactorK (seconds) (seconds) ==================================== B4(CPU) switch_prompt # SmartCell 6A000/ZX-250 Reference Manual 2-59...
Page 84: Ipaddress
IPAddress Use IPAddress to change IP addresses of the Ethernet port and IP netmask on the switch. Operator modify Parameters Input Parameter Description [IPAddress] IP address of the Ethernet port. [IPNetMask] IP netmask of the Ethernet port. Defaults to the appropriate netmask, based on the class of the IP address.
Page 85: Ipatmarp
11.1.1.3 39:00:00:00:00:00:00:00:20:D4:14:22:80:00:00:0B:01:01:03:00 switch_prompt # ), these ARP entries are registered with the IP/ATM show clientarp Value/Field Size 0-127 Descriptions This command displays the ARP entries associated with active IP/ATM clients which are IP/ATM servers. SmartCell 6A000/ZX-250 Reference Manual 2-61 Default...
Page 86: Ipatmclient
IP address, so it is either 255.0.0.0, 255.255.0.0, or 255.255.255.0. With less address left, you have fewer bits to use to define subnets. [MTU] Maximum transfer unit assigned for this client. 2-62 SmartCell 6A000/ZX-250 Reference Manual Console Commands Value/Field Size Default 0-127 LOCAL,...
Page 87 NetMask(255.0.0.0): MTU(9180) switch_prompt # Description Creates a new IP/ATM client to the switch. If the circuits in this VLAN (virtual LAN) are SVCs, (switched virtual circuits) and you want to use this client as the ARP server, enter for the server type. If you do not want to use this...
Page 88 # add ipatmclient ClientNumber(0) : 60 ServerType(NONE) ServerAddr() IpAddr() : 101.1.1.60 NetMask(255.0.0.0): MTU(9180) switch_prompt # switch_prompt # modify ipatmclient ClientNumber(0) : 50 ServerType(LOCAL) : ServerAddr() IpAddr(101.1.1.50): 101.1.1.150 NetMask(255.0.0.0): MTU(9180) switch_prompt # show client switch_prompt # 2-64 SmartCell 6A000/ZX-250 Reference Manual Console Commands...
Page 89: Ipatmpvc
VCI on port B4 to reach a particular IP/ATM client. Output Parameter Description [IPAddress] IP address of the client. [VPI/VCI] VPI/VCI values of control direct VCC or multicast send VCC. Value/Field Size Default 0-127 NONE 7-15 characters 0-maximum 0-maximum SmartCell 6A000/ZX-250 Reference Manual 2-65...
Page 90 ServerAddress() IPAddress() NetMask(255.0.0.0) MTU(9180) switch_prompt # 2-66 SmartCell 6A000/ZX-250 Reference Manual Description Creates an IP/ATM PVC. To achieve this, you must first enter (see “PVC” for more details), and then add pvc for a new client (see “IPATMClient” for more ipatmclient details).
Page 91 # switch_prompt #show ipatmpvc 0 IP/ATM Client 0 PVC Table IP Address VPI/VCI =========================================================================== 10.1.1.7 0/130 switch_prompt # switch_prompt # delete ipatmpvc ClientNumber(0) : DestinationIP() : 10.1.1.7 Confirm(y/n)?: y switch_prompt # : 10.1.1.7 : 130 SmartCell 6A000/ZX-250 Reference Manual 2-67...
Page 92: Ipatmstat
Inverse ARP requests from the server sent to the client. [INARP Replies Recvd] Inverse ARP replies from a client received by the server. [INARP Unreachables] Inverse ARP unreachable clients. [INARP NAKs] Number of inverse ARP NAKs received. 2-68 SmartCell 6A000/ZX-250 Reference Manual Console Commands Value/Field Size Default 0-127...
Page 93 Stats for IP/ATM server 50 =========================================================================== ARP Requests Recvd ARP Replies Sent InARP Requests Sent : InARP Replies Recvd : InARP Unreachables InARP NAKs switch_prompt # Description Displays statistics associated with the IP/ATM client server. ArpUnrch ArpNaks SmartCell 6A000/ZX-250 Reference Manual 2-69...
Page 94: Laneclient
LANEClient Use LANEClient (local area network emulation client) to allow inband management of LANE clients on the switch. Operators add, modify, (show client) Parameters Input Parameter Description [ClientNumber] Number of the client. [LanName] Name of the ELAN for this client to join.
Page 95 # Description Creates a new LANE (LAN emulation) client to the switch. Add a LANE client if you want to access the switch command console using LANE. Changes an existing LANE client on the switch. Displays all or specified clients on the switch. Enter show client to establish the different client types on the switch.
Page 96: Lecs
2p›F The status of the LECS setting is persistent, so if you reboot the switch while you have the LECS stopped, the LECS will continue to be stopped, even after rebooting.You have to manually start the LECS again.
Page 97 Console Commands Examples switch_prompt # start lecs NOTICE - 'LECS' ***** LECS started ***** switch_prompt # switch_prompt # stop lecs confirm (y/n)?: y NOTICE - 'LECS' ***** LECS shutdown ***** switch_prompt # SmartCell 6A000/ZX-250 Reference Manual 2-73...
Page 98: Lecselan
Maximum transfer unit for the clients joining this ELAN. [TLVSet] The TLV (type, length, and value) set number (set of TLV parameters) corresponding to the members joining this ELAN. 2-74 SmartCell 6A000/ZX-250 Reference Manual Console Commands Value/Field Size Default 0 - 127 Up to 32 characters...
Page 99 BUS ATM address to assign to the ELAN, or if you want to change the ELAN type. The [ElanNumber] parameter is the key field for finding the correct ELAN. Displays a specified ELAN configuration on the LECS. SmartCell 6A000/ZX-250 Reference Manual 2-75 add lecselan add buselan, add show elan...
Page 100 # switch_prompt # show lecselan ELANNumber(ALL) All the ELANs Configured on the LECS ============================================================================ ELAN Number ELAN Name : elan1 LES Address : 39:00:00:00:00:00:00:00:00:00:14:15:00:00:20:D4:14:15:00:04 ELAN Type : 802.3 : 1516 switch_prompt # 2-76 SmartCell 6A000/ZX-250 Reference Manual Console Commands...
Page 101: Lecselanlec
If modification is needed, you must first enter delete lecselanlec and then create another LECSELANLEC by entering add lecselanlec. SmartCell 6A000/ZX-250 Reference Manual 2-77...
Page 102 <clientatm/macaddress/routedescriptor> [ELANNumber] <elannumber> Administrator show [ELANNumber] <elannumber> lecselanlec 2-78 SmartCell 6A000/ZX-250 Reference Manual Console Commands Description Removes a LANE client entry from an existing ELAN on the LECS. The length of the address (ATM, MAC, Route Descriptor) that you specify determines which LANE client entry is deleted.
Page 103 # show lecselanlec ELANNumber(ALL): 1 Elan# MacAddr/RouteDesc LECAddress ============================================================================ 01:02:03:04:05:06 39:00:00:00:00:00:00:00:00:00:14:7B:00:00:20:D4:14:7B:00:01 switch_prompt # switch_prompt # modify lecselanlec LECAddress/MACddress/RouteDesc: 01:02:03:04:05:06 ELANNumber(0): 2 switch_prompt # switch_prompt # show lecselanlec ELANNumber(ALL): 2 Elan# MacAddr/RouteDesc LECAddress ============================================================================ 01:02:03:04:05:06 39:00:00:00:00:00:00:00:00:00:14:7B:00:00:20:D4:14:7B:00:01 switch_prompt # SmartCell 6A000/ZX-250 Reference Manual 2-79...
Page 104: Lecsstat
[Invalid Destination] [Invalid Address] [No. LEC Configs] [Configuration Errors] [Insufficient Information] 2-80 SmartCell 6A000/ZX-250 Reference Manual Description Number of successful configuration requests. Number of bad configuration requests. Number of configuration requests with invalid request parameters. Number of configuration requests LECS could not process due to insufficient resources.
Page 105 Bad Configuration Requests Invalid Request Parameters Insufficient Resources Access Denied Invalid Requester Ids Invalid Destination Invalid Address No. LEC Configs Configuration Errors Insufficient Information switch_prompt # Description Displays statistical information about configuration requests to the LECS. SmartCell 6A000/ZX-250 Reference Manual 2-81...
Page 106: Lecstlvparam
[Max Unknown Frame Time]. That is why [Max Unknown Frame Time] appears in lecstlvset when “2” is entered at the [TLVIndex] prompt. lecstlvparam 2-82 SmartCell 6A000/ZX-250 Reference Manual Value/Field Size 1-32767 1-15 Description Removes a TLV parameter from a TLV set on the LECS. Use show lecstlvset before entering this command, so you know the index number of the TLV parameter you want to delete.
Page 107 =========================================================================== TLVSet 2 : Control Timeout Max Unknown Frame Time Arp Aging Time Forward Delay switch_prompt # switch_prompt # delete lecstlvparam TlvsetNumber() TlvIndex() TLVIndex TLVDescription ============================================================================ Max Unknown Frame Count Confirm(y/n)?:y switch_prompt # Value Value SmartCell 6A000/ZX-250 Reference Manual 2-83...
Page 108: Lecstlvset
Maximum time a LEC will maintain an entry for a non-local MAC address in its cache in the absence of updates. [ArpResponseTime] Maximum time that the LEC expects a request/response cycle to take. 2-84 SmartCell 6A000/ZX-250 Reference Manual Console Commands Value/Field Size Default 1-32767 seconds/10-300...
Page 109 VCC. [ConnectionCompeteTime] Time period in which data or a message is expected from a calling party when establishing a connection. Value/Field Size Default seconds/1-4 seconds/1-8 seconds/0-4095 cells p/second/ 0-370370 cells p/second/ 0-370370 seconds/ 1-10 SmartCell 6A000/ZX-250 Reference Manual 2-85...
Page 110 [ConnectionCompeteTime] <connectioncompetetime> Administrator show [TLVSetNumber] <tlvsetnumber> lecstlvset 2-86 SmartCell 6A000/ZX-250 Reference Manual Console Commands Description Creates a TLV set on the LECS. Removes a TLV set from the LECS. Changes an existing TLV set on the LECS. Displays either all or a specified TLV set on...
Page 111 MulticastSendVCCType[0-2](1) MulticastSendVCCAvgRate[0-370370]() MulticastSendVCCPeakRate[0-370370]() ConnectionCompeteTime[1-10](8) switch_prompt # : 200 : 50 : 50000 : 250 : 27 : 27 : 2000 Value : 250 : 40 : 40000 : 200 : 20 : 20 : 2500 SmartCell 6A000/ZX-250 Reference Manual 2-87...
Page 112 VCC Timeout Max Retry Count Arp Aging Time Forward Delay ARP Response Time Flush Timeout Path Switching Delay Local Seg Id Multicast Send VCC Type Connection Complete Time switch_prompt # 2-88 SmartCell 6A000/ZX-250 Reference Manual Value 40000 2500 Console Commands...
Page 113: Lecsvcc
Description Operator Parameters/Permissions show [VC Type] <vctype> lecsvcc [VPI/VCI] <vpi/vci> Example switch_prompt # show lecsvcc VC Type VPI/VCI =========================================== 0/31 0/33 0/112 switch_prompt # Descriptions Displays the active VCCs (SVCs and PVCs) on the LECS. SmartCell 6A000/ZX-250 Reference Manual 2-89...
Page 114: Les
# stop les STOPPING LES/BUS Confirm(y/n)?:y NOTICE - 'ZLESSRV' ***** LES shutdown ***** switch_prompt # 2-90 SmartCell 6A000/ZX-250 Reference Manual at the switch prompt. start les stop les Description Shows LES and BUS status. Starts the LES and BUS on the switch.
Page 115 Bus Connect 39:00:00:00:00:00:00:00:20:D4:14:15:00:00:20:D4:14:15:00:00 switch_prompt # switch_prompt # stop les STOPPING LES/BUS Confirm(y/n)?:y NOTICE - 'ZLESSRV' ***** LES shutdown ***** switch_prompt # start les NOTICE - 'ZLESSRV' ***** LES started ***** switch_prompt # NOTICE - 'ZLESSRV' LES sendjoinresp: SmartCell 6A000/ZX-250 Reference Manual 2-91...
Page 116: Lesarp
[ElanNumber] <elannumber> Example switch_prompt # show lesarp ELANNumber(0) ARP Table entries for ELAN ELAN001 =========================================================================== LECId MACAddr/RouteDesc: 00:20:D4:14:22:80 ATM Address : 39:00:00:00:00:00:00:00:20:D4:14:22:80:00:20:D4:14:22:80:00 switch_prompt # 2-92 SmartCell 6A000/ZX-250 Reference Manual Description Displays the LESARP entry for the specified ELAN. Console Commands...
Page 117: Lesclient
VPI/VCI (virtual path/channel identifier) values of control direct VCC (virtual channel connection) or multicast send VCC. [ATM address] ATM address of the client. [Flags] Indicates whether the client is a PROXY or a NON-PROXY client. Value/Field Size Default 0-127 1-65279 SmartCell 6A000/ZX-250 Reference Manual 2-93...
Page 118 ATM Address : 39:00:00:00:00:00:00:00:20:D4:14:2F:00:00:20:D4:14:2F:00:00 Flags : NONPROXY switch_prompt # 2-94 SmartCell 6A000/ZX-250 Reference Manual Description Removes a client from the specified ELAN on the LES. Displays information about all clients that have joined the specified ELAN on the LES. ELAN000...
Page 119: Leselan
PVC, SVC 802.3 (Ethernet) 802.3 802.5 (Token Ring) Yes: VCC is PMP No: VCC is PTP 1516 or 9234 (Ethernet), 1516 4544 (Token Ring) ALL, PROXY PROXY 13-20 byte hex-based/ NONE Up to 59 characters SmartCell 6A000/ZX-250 Reference Manual 2-95...
Page 120 <controldistributevccoption> [BUSATMAddress] <busatmaddress> Administrator 2-96 SmartCell 6A000/ZX-250 Reference Manual Description Creates a specified ELAN on the LES. Each ELAN must have both a LES and a BUS assigned to it. Removes a specified ELAN from the LES and drops all the clients connected to it.
Page 122: Leslecstat
Number of ARP (address resolution protocol) requests forwarded by the BUS and the LES from this LEC. [Sends] Number of requests or responses sent to this LEC by LES. 2-98 SmartCell 6A000/ZX-250 Reference Manual Console Commands Value/Field Size Default 0-127...
Page 124: Lesstat
[Join duplicate LAN destination errors] [Reg. duplicate LAN destination errors] [Join duplicate ATM destination errors] [Reg. duplicate ATM destination errors] [Join insufficient resource errors] 2-100 SmartCell 6A000/ZX-250 Reference Manual Description Number of ELAN to which the LES belongs. Description Successful join responses sent out by the LES.
Page 125 Invalid ATM address errors for join request. Invalid ATM address errors for register request. Description Displays statistical information about the specified ELAN on the LES. Clears statistical information about the specified ELAN on the LES. SmartCell 6A000/ZX-250 Reference Manual 2-101...
Page 126 Join invalid LAN destination errors Reg. invalid LAN destination Join invalid ATM address errors Reg. invalid ATM address errors switch_prompt # switch_prompt # clear lesstat ELANNumber(ALL) Clear LES ELAN 3 Statistics Confirm(y/n)?: y switch_prompt # 2-102 SmartCell 6A000/ZX-250 Reference Manual :102 errors Console Commands...
Page 127: Mynmaddr
Console Commands MyNMAddr Use MyNMAddr (my network management address) to manage the switch through the specified IP address. Operators modify, show Parameter Parameter Description [IPAddr] IP address of the switch. Descriptions Operator Parameters/Permissions modify [IPAddress] <ipaddress> mynmaddr Administrator show [IPAddress] <ipaddress>...
Page 128 Console Commands Examples switch_prompt # modify mynmaddr IpAddr() : 204.95.75.186 My Nm IP-Address : 204.95.75.186 switch_prompt # switch_prompt # show mynmaddr My Nm IP-Address : 204.95.75.186 switch_prompt # 2-104 SmartCell 6A000/ZX-250 Reference Manual...
Page 129: Netprefix
QSAAL, and ILMI links are released. You must reboot for this command to take effect. Deletes a net prefix for a particular port. Displays net prefixes for a specified port or for all ports. SmartCell 6A000/ZX-250 Reference Manual 2-105...
Page 130 PortNumber(ALL) : A2 NetPrefix() : 39:00:00:00:00:00:00:00:00:00:20:D4:14:16:00 switch_prompt # switch_prompt # show netprefix PortNumber :( ALL ):a1 Port# NetPrefix ============================================================== 39:00:00:00:00:00:00:00:00:00:20:D4:14:15:00 39:00:00:00:00:00:00:00:00:00:20:D4:14:16:00 switch_prompt # Netprefix 2-106 SmartCell 6A000/ZX-250 Reference Manual switch MAC address Console Commands end system MAC address selector byte...
Page 131: Passwd
New Password: levelone Reenter Password: levelone Password Changed Successfully switch_prompt # Value/Field Size Default 0-8 characters (0 is no password) 0-8 characters (0 is no password) Description Changes the password of the current or lower-privileged user. SmartCell 6A000/ZX-250 Reference Manual 2-107...
Page 132: Ping
Administrator Example switch_prompt # start ping DestIP() : 204.95.77.254 Count(1) : 1 204.95.77.254 is alive switch_prompt # 2-108 SmartCell 6A000/ZX-250 Reference Manual Value/Field Size 5-8 characters 1-100 Description Starts the pinging of the external destination you are trying to reach.
Page 133: Pnniinterface
Q"`“ˆ˜8Í-Í7LÀR "`“ˆ˜ˆÃÍÀ>ÍˆÜiÊÝiˆ}…ÍÊvœÀÊÍ…iÊÀi>•Íˆ“iÊ Ü>Àˆ>L•iÊLˆÍÊÀ>ÍiÊ--07*-®ÊÃiÀÜˆViÊV>Íi}œÀß° Q"`“ˆ˜8Í!ÀÍ7LÀR "`“ˆ˜ˆÃÍÀ>ÍˆÜiÊÝiˆ}…ÍÊvœÀÊÍ…iÊ˜œ˜†Ài>•Íˆ“iÊ Ü>Àˆ>L•iÊLˆÍÊÀ>ÍiÊ-!-07*-®ÊÃiÀÜˆViÊV>Íi}œÀß° Q"`“ˆ˜8Í"LÀR "`“ˆ˜ˆÃÍÀ>ÍˆÜiÊÝiˆ}…ÍÊvœÀÊÍ…iÊ>Ü>ˆ•>L•iÊLˆÍÊ À>ÍiÊ-"*-®ÊÃiÀÜˆViÊV>Íi}œÀß° Q"`“ˆ˜8Í2LÀR "`“ˆ˜ˆÃÍÀ>ÍˆÜiÊÝiˆ}…ÍÊvœÀÊÍ…iÊÖ˜Ã«iVˆvˆi`ÊLˆÍÊ À>ÍiÊ-2*-®ÊÃiÀÜˆViÊV>Íi}œÀß° Q-VV.iÀÜ+>Íi}œÀßR .iÀÜˆViÊV>Íi}œÀßÊÖÃi`ÊvœÀÊÍ…iÊ+!!7ÊÀœÖÍˆ˜}Ê Vœ˜ÍÀœ•ÊV…>˜˜i•Ê-7+7r£n®Êœ˜ÊÍ…ˆÃÊˆ˜ÍiÀv>Vi°Ê ="d¤F—)aFd=˜9a«F &FO"¤d› "£°°°"{]Ê*£°°°*Ï]Ê+£°°°+{]Ê "£ -£°°°-{]Ê">> +œÃˆÍˆÜiÊˆ˜Íi}iÀ xä{ä +œÃˆÍˆÜiÊˆ˜Íi}iÀ xä{ä +œÃˆÍˆÜiÊˆ˜Íi}iÀ xä{ä +œÃˆÍˆÜiÊˆ˜Íi}iÀ xä{ä +œÃˆÍˆÜiÊˆ˜Íi}iÀ xä{ä !-07*- -07*- !-07*- "*-Ê 2*-Ê SmartCell 6A000/ZX-250 Reference Manual 2-109...
Page 134 AdmnWtUbr(5040) RccServCategory(NRTVBR) switch_prompt # show pnniinterface Port AdmnWt AdmnWt AdmnWt Number RT_VBR NRT_VBR ================================================================================ 5040 5040 5040 switch_prompt # 2-110 SmartCell 6A000/ZX-250 Reference Manual &F’4•az›apm .iÍÃÊ«>À>“iÍiÀÃÊvœÀÊ+!!7ÊÀœÖÍˆ˜}° -ˆÃ«•>ßÊ«>À>“iÍiÀÃÊvœÀÊ+!!7ÊÀœÖÍˆ˜}° : b2 : 200 AdmnWt AdmnWt RCC Srv Category 5040 NRTVBR Console Commands...
Page 135: Pnnilink
Parameters ,mz¤›˜6"•"hF›F• &F’4•az›apm Q+œÀÍ!Ö“LiÀR +œÀÍÊ˜Ö“LiÀÊœ˜ÊÍ…iÊÃÝˆÍV…° 3¤›z¤›˜6"•"hF›F• &F’4•az›apm Q+œÀÍR .>“iÊ>ÃÊQ+œÀÍ!Ö“LiÀRÊˆ˜«ÖÍÊ«>À>“iÍiÀ° Q-i“œÍiÊ!œ`iÊ7`R 7`i˜ÍˆvˆiÀÊœvÊ>ÊÀi“œÍiÊ˜œ`iÊ-i˜`ÊÃßÃÍi“Ê>ÍÊœÍ…iÀÊi˜`ÊœvÊ•ˆ˜Ž®°Ê Q6i••œÊ.Í>ÍiR 4œÀÊ…œÀˆãœ˜Í>•Ê>˜`ÊœÖÍÃˆ`iÊ•ˆ˜ŽÃÊLiÍÝii˜Ê•œÝiÃÍ†•iÜi•Ê˜œ`iÃÊ>˜`ÊvœÀÊ•ˆ˜ŽÃÊœvÊÖ˜Ž˜œÝ˜ÊÍß«i]Ê Í…ˆÃÊ«>À>“iÍiÀÊˆ˜`ˆV>ÍiÃÊÍ…iÊÃÍ>ÍiÊœvÊÍ…iÊ6i••œÊ«ÀœÍœVœ•ÊiÞV…>˜}iÊœÜiÀÊÍ…ˆÃÊ•ˆ˜Ž°ÊÊ+œÃÃˆL•iÊ Ü>•ÖiÃÊ>Ài\ÊÊ-œÝ˜]Ê"ÍÍi“«Í]Ê£8>ß7˜Ãˆ`i]ÊÔ8>ß7˜Ãˆ`i]Ê£8>ß#ÖÍÃˆ`i]ÊÔ8>ß#ÖÍÃˆ`i]Ê>˜`Ê +œ““œ˜#ÖÍÃˆ`i° 7vÊ>ÊÃ«iVˆvˆVÊ«œÀÍÊ˜Ö“LiÀÊˆÃÊ}ˆÜi˜]ÊÍ…iÊÃ…œÝÊ«˜˜ˆ•ˆ˜ŽÊVœ““>˜`Ê`ˆÃ«•>ßÃÊÍ…iÊvœ••œÝˆ˜}Ê>``ˆÍˆœ˜>•Êvˆi•`Ã\ Q+œÀÍÊ7`R 7`i˜ÍˆvˆiÀÊœvÊÍ…iÊ«œÀÍÊ>ÃÃœVˆ>Íi`ÊÝˆÍ…ÊÍ…iÊ•ˆ˜ŽÊLßÊÍ…iÊ•œV>•Ê˜œ`iÊ-ÃÝˆÍV…®°Ê0…ˆÃÊÜ>•ÖiÊ…>ÃÊ “i>˜ˆ˜}Êœ˜•ßÊÝˆÍ…ˆ˜ÊVœ˜ÍiÞÍÊœvÊ+!!7ÊÀœÖÍˆ˜}°Ê0…iÊÜ>•ÖiÊˆÃÊ>˜Êˆ˜Íi}iÀ° Q>ˆ˜ŽÊ0ß«iR 7˜`ˆV>ÍiÃÊÍ…iÊÍß«iÊœvÊ•ˆ˜ŽÊ`iÃVÀˆLi`°Ê4œÀÊÍ…ˆÃÊÀi•i>Ãi]Ê«œÃÃˆL•iÊÜ>•ÖiÃÊ>ÀiÊ2˜Ž˜œÝ˜Ê>˜`Ê >œÝiÃÍÊ>iÜi•Ê6œÀˆãœ˜Í>•Ê>ˆ˜Ž° Q+˜˜ˆÊ7iÀÃˆœ˜R 4œÀÊ•œÝiÃÍ†•iÜi•Ê…œÀˆãœ˜Í>•Ê>˜`ÊÖ˜Ž˜œÝ˜Ê•ˆ˜ŽÊÍß«iÃ]ÊÍ…ˆÃÊ>ÍÍÀˆLÖÍiÊˆ˜`ˆV>ÍiÃÊÍ…iÊÜiÀÃˆœ˜ÊœvÊ +!!7ÊÀœÖÍˆ˜}Ê«ÀœÍœVœ•ÊÖÃi`ÊÍœÊiÞV…>˜}iÊˆ˜vœÀ“>Íˆœ˜°Ê7vÊVœ““Ö˜ˆV>Íˆœ˜ÊÝˆÍ…ÊÍ…iÊ ˜iˆ}…LœÀÊ˜œ`iÊ…>ÃÊ˜œÍÊßiÍÊLii˜ÊiÃÍ>L•ˆÃ…i`]ÊÍ…i˜ÊÍ…iÊ+˜˜ˆ7iÀÃˆœ˜ÊˆÃÊÃiÍÊÍœÊ2˜Ž˜œÝ˜° Q-i“œÍiÊ+œÀÍÊ7`R 7`i˜ÍˆvˆiÀÊœvÊÍ…iÊ«œÀÍÊ>ÃÃœVˆ>Íi`ÊÝˆÍ…ÊÍ…iÊ•ˆ˜ŽÊLßÊÍ…iÊÀi“œÍiÊ˜œ`i° ="d¤F—)aFd=˜9a«F &FO"¤d› "£°°°"{]Ê*£°°°*Ï]Ê+£°°°+{]Ê ">> -£°°°-{]Ê">> SmartCell 6A000/ZX-250 Reference Manual 2-111...
Page 137: Pnnimetrics
ÝˆÍ…ÊÍ…iÊ}ˆÜi˜ÊÍ>}Ê>˜`Ê`ˆÀiVÍˆœ˜° Q5+"+Û+>+R 7˜`ˆV>ÍiÃÊÝ…iÍ…iÀÊ>`ÜiÀÍˆÃi`Ê5+"+Ê«>À>“iÍiÀÃÊ >««•ßÊvœÀÊ+>+räÊÍÀ>vvˆVÊœÀÊvœÀÊ+>+rä³£ÊÍÀ>vvˆV°Ê Q"`“ˆ˜8iˆ}…ÍR "`“ˆ˜ˆÃÍÀ>ÍˆÜiÊÝiˆ}…ÍÊvœÀÊÍ…iÊÃ«iVˆvˆi`ÊÃiÀÜˆViÊ V>Íi}œÀˆiÃÊvÀœ“ÊÍ…iÊÃÝˆÍV…ÊÍœÊÍ…iÊÀi“œÍiÊi˜`ÊœvÊ Í…iÊ+!!7Ê•ˆ˜Ž°Ê0…iÊ…ˆ}…iÀÊÍ…iÊÜ>•Öi]ÊÍ…iÊ•iÃÃÊ `iÃˆÀ>L•iÊÍ…iÊ«>Í…°Ê7vÊÍ…ˆÃÊ«>À>“iÍiÀÊˆÃÊ˜œÍÊÖÃi`]ÊˆÍÃÊ Ü>•ÖiÊÃ…œÖ•`ÊLiÊÃiÍÊÍœÊ†£°Ê Q >Þ+i••->ÍiR >Þˆ“Ö“ÊVi••ÊÀ>ÍiÊ-ˆ˜ÊVi••ÃÊ«iÀÊÃiVœ˜`®ÊvœÀÊÍ…iÊ Ã«iVˆvˆi`ÊÃiÀÜˆViÊV>Íi}œÀß°Ê7vÊÍ…ˆÃÊ«>À>“iÍiÀÊˆÃÊ˜œÍÊ ÖÃi`]ÊÃiÍÊˆÍÃÊÜ>•ÖiÊÍœÊ†£° Q"Ü>ˆ•>L•i+i••->ÍiR "Ü>ˆ•>L•iÊVi••ÊÀ>ÍiÊ-ˆ˜ÊVi••ÃÊ«iÀÊÃiVœ˜`®ÊvœÀÊÍ…iÊ Ã«iVˆvˆi`ÊÃiÀÜˆViÊV>Íi}œÀß°Ê7vÊÍ…ˆÃÊ«>À>“iÍiÀÊˆÃÊ˜œÍÊ ÖÃi`]ÊÃiÍÊˆÍÃÊÜ>•ÖiÊÍœÊ†£° ="d¤F—)aFd=˜9a«F &FO"¤d› ˜É> 7˜Vœ“ˆ˜} #ÖÍ}œˆ˜} #ÖÍ}œˆ˜} -07*- !-07*- "*- ˜É> +>+räÊ-£® Ô +>+rä³£Ê-Ô® xä{ä †£ †£ SmartCell 6A000/ZX-250 Reference Manual 2-113...
Page 138 Q7>Àˆ>˜Vi4>VÍœÀR 7>Àˆ>˜ViÊv>VÍœÀÊˆ˜ÊÖ˜ˆÍÃÊœvÊÔ ÃiÀÜˆViÊV>Íi}œÀß°Ê7vÊÍ…ˆÃÊ«>À>“iÍiÀÊˆÃÊ˜œÍÊÖÃi`]ÊÃiÍÊ ˆÍÃÊÜ>•ÖiÊÍœÊ†£° 3¤›z¤›˜6"•"hF›F• &F’4•az›apm Q iÍÀˆVÃR .«iVˆvˆiÃÊÍ…iÊ“iÍÀˆVÃÊÃiµÖi˜ViÊ˜Ö“LiÀ° Q-ˆÀiVÍˆœ˜R .>“iÊ>ÃÊQ0À>vvˆV-ˆÀiVÍˆœ˜RÊˆ˜«ÖÍÊ«>À>“iÍiÀ° 7vÊ>Ê“iÍÀˆVÃÊÃiµÖi˜ViÊ˜Ö“LiÀÊˆÃÊ}ˆÜi˜]ÊÍ…iÊvœ••œÝˆ˜}Êvˆi•`ÃÊ>ÀiÊ`ˆÃ«•>ßi`° Q >ÞÊ+i••Ê->ÍiR >Þˆ“Ö“ÊVi••ÊÀ>ÍiÊ-ˆ˜ÊVi••ÃÊ«iÀÊÃiVœ˜`®ÊvœÀÊÍ…iÊÃ«iVˆvˆi`ÊÃiÀÜˆViÊV>Íi}œÀß° Q"Ü>ˆ•>L•iÊ+i••Ê->ÍiR "Ü>ˆ•>L•iÊVi••ÊÀ>ÍiÊ-ˆ˜ÊVi••ÃÊ«iÀÊÃiVœ˜`®ÊvœÀÊÍ…iÊÃ«iVˆvˆi`ÊÃiÀÜˆViÊV>Íi}œÀß° Q >Þˆ“Ö“Ê+i••Ê0À>˜ÃviÀÊ >Þˆ“Ö“ÊVi••ÊÍÀ>˜ÃviÀÊ`i•>ßÊ-ˆ˜Ê“ˆVÀœÃiVœ˜`Ã®ÊvœÀÊÍ…iÊÃ«iVˆvˆi`ÊÃiÀÜˆViÊV>Íi}œÀß° -i•>ßR 2-114 SmartCell 6A000/ZX-250 Reference Manual ="d¤F—)aFd=˜9a«F -†˜® ÊÝ…iÀiÊ˜ÊˆÃÊÍ…iÊÜ>•ÖiÊ…iÀi°Ê7vÊ -†n® ÊvœÀÊÍ…iÊÃ«iVˆvˆi`Ê Console Commands &FO"¤d› †£ †£ †£ †£ †£ †£...
Page 139 [AvailableCellRate] <availablecellrate> [MaxCellTransferDelay] <maxcelltransferdelay> [CellDelayVariation] <celldelayvariation> [CellLossRateCLP0] <celllossrateclp0> [CellLossRateCLP0+1] <celllossrateclp0+1> [CellRateMargin] <cellratemargin> [VarianceFactor] <variancefactor> "`“ˆ˜ˆÃÍÀ>ÍœÀ `i•iÍiÊ«˜˜ˆ“iÍÀˆVÃ MetricsTag] <metricstag> [TrafficDirection] <trafficdirection> [Index] <index> "`“ˆ˜ˆÃÍÀ>ÍœÀ Ã…œÝÊ«˜˜ˆ“iÍÀˆVÃ "`“ˆ˜ˆÃÍÀ>ÍœÀ -†˜® ]ÊÝ…iÀiÊ˜ÊˆÃÊÍ…iÊÜ>•ÖiÊœvÊÍ…ˆÃÊ«>À>“iÍiÀ° -†˜® ]ÊÝ…iÀiÊ˜ÊˆÃÊÍ…iÊÜ>•ÖiÊœvÊÍ…ˆÃÊ«>À>“iÍiÀ° -†n® ÊvœÀÊÍ…iÊÃ«iVˆvˆi`ÊÃiÀÜˆViÊV>Íi}œÀß° &F’4•az›apm +Ài>ÍiÃÊ>Ê+!!7Ê“iÍÀˆV° -i•iÍiÃÊ>Ê+!!7Ê“iÍÀˆV° -ˆÃ«•>ßÃÊ+!!7Ê“iÍÀˆVÃ°Ê SmartCell 6A000/ZX-250 Reference Manual 2-115...
Page 141 CLP0 5040 0x18 CLP0 5040 CLP0+1 5040 CLP0 5040 CLP0 5040 0x10 CLP0 1000 SmartCell 6A000/ZX-250 Reference Manual 2-117 Service Categories RTVBR NRTVBR NRTVBR RTVBR NRTVBR NRTVBR ABR CBR RTVBR NRTVBR ABR CBR RTVBR NRTVBR ABR CBR RTVBR NRTVBR ABR...
Page 142: Pnnineighbor
,mz¤›˜6"•"hF›F• &F’4•az›apm Q!iˆ}…LœÀ!Ö“LiÀR !Ö“LiÀÊvœÀÊi>V…Ê˜iˆ}…LœÀÊÍ…>ÍÊV>˜ÊLiÊÃii˜Ê LßÊÍ…iÊÃÝˆÍV…°Ê2ÃiÊÃ…œÝÊ«˜˜ˆ˜iˆ}…LœÀÊ ">>ÊÍœÊ}iÍÊ>Ê•ˆÃÍÊœvÊ˜iˆ}…LœÀÃÊ>˜`ÊÍ…iˆÀÊ ˜Ö“LiÀÃ° 3¤›z¤›˜6"•"hF›F• &F’4•az›apm Q!Ö“LiÀR .>“iÊ>ÃÊQ!iˆ}…LœÀ!Ö“LiÀRÊˆ˜«ÖÍÊ«>À>“iÍiÀ° Q!iˆ}…LœÀÊ!œ`iÊ7-R 7`i˜ÍˆvˆiÀÊœvÊÍ…iÊ˜iˆ}…LœÀÊ˜œ`i° Q.Í>ÍiR +!!7Ê`>Í>L>ÃiÊiÞV…>˜}iÊÃÍ>ÍiÊLiÍÝii˜ÊÍ…iÊÃÝˆÍV…Ê>˜`Ê˜iˆ}…LœÀÊ˜œ`i°Ê+œÃÃˆL•iÊÜ>•ÖiÃÊ>ÀiÊ -œÝ˜]Ê!i}œÍˆ>Íˆœ˜]Ê.ÞV…>˜}i]Ê>œ>`ˆ˜}]Ê>˜`Ê4Ö••° 8…i˜Ê>Ê˜iˆ}…LœÀÊ˜Ö“LiÀÊˆÃÊ}ˆÜi˜]ÊÍ…iÊvœ••œÝˆ˜}Êvˆi•`ÃÊ>ÀiÊ`ˆÃ«•>ßi`° Q-VÜÊ-*Ê.Ö“ÃR !Ö“LiÀÊœvÊ`>Í>L>ÃiÊÃÖ““>ÀßÊ«>VŽiÍÃÊÀiViˆÜi`ÊvÀœ“ÊÍ…iÊ˜iˆ}…LœÀÊ˜œ`i° Q-VÜÊ+ÍÃ«ÃR !Ö“LiÀÊœvÊ+0.+ÃÊÀiViˆÜi`ÊvÀœ“ÊÍ…iÊ˜iˆ}…LœÀÊ˜œ`i° Q9“ÍÊ+ÍÃ«ÃR !Ö“LiÀÊœvÊ+0.+ÃÊ-Ài®ÍÀ>˜Ã“ˆÍÍi`ÊÍœÊÍ…iÊ˜iˆ}…LœÀÊ˜œ`i° Q-VÜÊ+ÍÃiÊ-iµÃR !Ö“LiÀÊœvÊ+0..ÊÀiµÖiÃÍÊ«>VŽiÍÃÊÀiViˆÜi`ÊvÀœ“ÊÍ…iÊ˜iˆ}…LœÀÊ˜œ`i° Q9“ÍÊ+ÍÃiÊ-iµÃR !Ö“LiÀÊœvÊ+0..ÊÀiµÖiÃÍÊ«>VŽiÍÃÊÍÀ>˜Ã“ˆÍÍi`ÊÍœÊÍ…iÊ˜iˆ}…LœÀÊ˜œ`i° Q-VÜÊ+ÍÃiÊ"VŽÃR !Ö“LiÀÊœvÊ+0..Ê>VŽ˜œÝ•i`}iÊ«>VŽiÍÃÊÀiViˆÜi`ÊvÀœ“ÊÍ…iÊ˜iˆ}…LœÀÊ˜œ`i° 2-118 SmartCell 6A000/ZX-250 Reference Manual Console Commands ="d¤F—)aFd=˜9a«F &FO"¤d› +œÃˆÍˆÜiÊˆ˜Íi}iÀÊœÀÊ">> ">>...
Page 143 Console Commands 3¤›z¤›˜6"•"hF›F• &F’4•az›apm Q9“ÍÊ+ÍÃiÊ"VŽÃR !Ö“LiÀÊœvÊ+0..Ê"VŽÊ«>VŽiÍÃÊÀiViˆÜi`ÊvÀœ“ÊÍ…iÊ˜iˆ}…LœÀÊ˜œ`i° Q+œÀÍÊ+œÖ˜ÍR !Ö“LiÀÊœvÊ«œÀÍÃÊÍ…>ÍÊVœ˜˜iVÍÊÍœÊÍ…iÊ˜iˆ}…LœÀÊ˜œ`i° Q+œÀÍÊ!Ö“LiÀR !Ö“LiÀÊˆ`i˜Íˆvßˆ˜}Ê>Ê«œÀÍÊVœ˜˜iVÍi`ÊÍœÊÍ…iÊ˜iˆ}…LœÀÊ˜œ`i° Q2Ãi`Ê4œÀÊ4•œœ`ˆ˜}R 7˜`ˆV>ÍiÃÊÝ…iÍ…iÀÊœÀÊ˜œÍÊÍ…iÊ«œÀÍÊˆÃÊLiˆ˜}ÊÖÃi`ÊvœÀÊÍÀ>˜Ã“ˆÃÃˆœ˜ÊœvÊv•œœ`ˆ˜}Ê>˜`Ê`>Í>L>ÃiÊ Ãß˜V…Àœ˜ˆã>Íˆœ˜Êˆ˜vœÀ“>Íˆœ˜ÊÍœÊÍ…iÊ˜iˆ}…LœÀÊ˜œ`i° Description 3zF•"›p• 6"•"hF›F•’˜—˜6F•ha’’apm’ Ã…œÝÊ [NeighborNumber] <neighbornum> «˜˜ˆ˜iˆ}…LœÀ "`“ˆ˜ˆÃÍÀ>ÍœÀ &F’4•az›apm -ˆÃ«•>ßÃÊÍ…iÊ+!!7Ê˜iˆ}…LœÀ-Ã®ÊœvÊÍ…iÊÃÝˆÍV…° SmartCell 6A000/ZX-250 Reference Manual 2-119...
Page 144 Rcv Ptse Reqs : 1 Xmt Ptse Reqs : 1 Rcv Ptse Acks : 13c Xmt Ptse Acks : 8f Port Count Ports connected the neighbor: Port Number Used for Flooding ================================= switch_prompt # 2-120 SmartCell 6A000/ZX-250 Reference Manual Console Commands State FULL...
Page 145: Pnninetworklink
Parameters ˜ ,mz¤›˜6"•"hF›F• &F’4•az›apm Q>ˆ˜ŽR >ˆ˜ŽÊÃiµÖi˜ViÊ˜Ö“LiÀ° 3¤›z¤›˜6"•"hF›F• &F’4•az›apm Q#Àˆ}ˆ˜>Íˆ˜}Ê!œ`iÊ7`RÊ 7`i˜ÍˆvˆiÀÊœvÊÍ…iÊ˜œ`iÊÝ…œÃiÊVœ˜˜iVÍˆÜˆÍßÊÝˆÍ…ˆ˜ÊˆÍÃi•vÊœÀÊÍœÊœÍ…iÀÊ˜œ`iÃÊˆÃÊ`ˆÃ«•>ßi`° Q#Àˆ}Ê+œÀÍÊ7`R 7`i˜ÍˆvˆiÀÊœvÊÍ…iÊ«œÀÍÊ>ÃÃœVˆ>Íi`ÊÝˆÍ…ÊÍ…iÊ•ˆ˜ŽÊLßÊÍ…iÊœÀˆ}ˆ˜>Íˆ˜}Ê˜œ`i° Q-i“œÍiÊ!œ`iÊ7`R 7`i˜ÍˆvˆiÀÊœvÊÍ…iÊ˜œ`iÊ>ÍÊÍ…iÊœÍ…iÀÊi˜`ÊœvÊÍ…iÊ•ˆ˜ŽÊvÀœ“ÊÍ…iÊœÀˆ}ˆ˜>Íˆ˜}Ê˜œ`i° Q-i“œÍiÊ+œÀÍÊ7`R 7`i˜ÍˆvˆiÀÊœvÊÍ…iÊ«œÀÍÊ>ÃÃœVˆ>Íi`ÊÝˆÍ…ÊÍ…iÊ•ˆ˜ŽÊLßÊÍ…iÊÀi“œÍiÊ˜œ`i° 7vÊ>ÊÃ«iVˆvˆVÊ•ˆ˜ŽÊÃiµÖi˜ViÊ˜Ö“LiÀÊˆÃÊ}ˆÜi˜]ÊÍ…iÊÃ…œÝÊ«˜˜ˆ˜iÍÝœÀŽ•ˆ˜ŽÊVœ““>˜`Ê`ˆÃ«•>ßÃÊÍ…iÊvœ••œÝˆ˜}Êvˆi•`Ã° Q7˜`iÞR "˜Êˆ˜`iÞÊˆ˜ÍœÊÍ…iÊÃiÍÊœvÊ•ˆ˜ŽÊ>˜`Ê˜œ`>•ÊVœ˜˜iVÍˆÜˆÍßÊ>ÃÃœVˆ>Íi`ÊÝˆÍ…ÊÍ…iÊœÀˆ}ˆ˜>Íˆ˜}Ê˜œ`iÊ>˜`Ê «œÀÍ°Ê0…ˆÃÊˆ˜`iÞÊˆÃÊ˜ii`i`ÊÃˆ˜ViÊÍ…iÀiÊ“>ßÊLiÊ“Ö•Íˆ«•iÊi˜ÍÀˆiÃÊvœÀÊ˜œ`>•ÊVœ˜˜iVÍˆÜˆÍßÊvÀœ“Ê>Ê Ã«iVˆvˆVÊ˜œ`iÊ>˜`Ê«œÀÍÊ«>ˆÀ° Q>ˆ˜ŽÊ0ß«iR 0…iÊÍß«iÊœvÊ+!!7Êi˜ÍˆÍßÊ>ÃÃœVˆ>Íi`ÊÝˆÍ…ÊÍ…ˆÃÊ•ˆ˜Ž°Ê+œÃÃˆL•iÊÜ>•ÖiÃÊ>ÀiÊ6œÀˆãœ˜Í>•Ê>ˆ˜Ž]Ê 2«•ˆ˜Ž]ÊœÀÊ2˜Ž˜œÝ˜° Q+iiÀÊ5ÀœÖ«Ê7`R 7`i˜ÍˆvˆiÃÊÍ…iÊ«iiÀÊ}ÀœÖ«ÊœvÊÍ…iÊœÀˆ}ˆ˜>Íˆ˜}Ê˜œ`i° Q"}}ÀÊ0œŽi˜R 7˜`ˆV>ÍiÃÊÍ…iÊ`iÀˆÜi`Ê>}}Ài}>Íˆœ˜ÊÍœŽi˜ÊÜ>•ÖiÊvœÀÊÍ…ˆÃÊ•ˆ˜Ž°Ê Q7«Ê+>«>Lˆ•ˆÍßR 7˜`ˆV>ÍiÃÊÝ…iÍ…iÀÊ7++ÃÊV>˜ÊLiÊiÃÍ>L•ˆÃ…i`Ê>VÀœÃÃÊÍ…iÊ+!!7Êi˜ÍˆÍßÊ>ÃÃœVˆ>Íi`ÊÝˆÍ…ÊÍ…ˆÃÊ•ˆ˜Ž° ="d¤F—)aFd=˜9a«F &FO"¤d› +œÃˆÍˆÜiÊˆ˜Íi}iÀÊœÀÊ">> ">> SmartCell 6A000/ZX-250 Reference Manual 2-121...
Page 146 # show pnninetworklink Link(ALL) LinkNum Originating Node Id Remote Node Id ================================================================================ 50:a0:39:00:00:00:00:00:00:00:00:00:14:4a:00:00:20:d4:14:4a:00:00 50:a0:39:00:00:00:00:00:00:00:00:00:14:c0:80:00:20:d4:14:c0:80:00 50:a0:39:00:00:00:00:00:00:00:00:00:14:4a:00:00:20:d4:14:4a:00:00 50:a0:39:00:00:00:00:00:00:00:00:00:14:bf:80:00:20:d4:14:bf:80:00 50:a0:39:00:00:00:00:00:00:00:00:00:14:4a:00:00:20:d4:14:4a:00:00 50:a0:39:00:00:00:00:00:00:00:00:00:14:c0:80:00:20:d4:14:c0:80:00 50:a0:39:00:00:00:00:00:00:00:00:00:14:bf:80:00:20:d4:14:bf:80:00 50:a0:39:00:00:00:00:00:00:00:00:00:14:4a:00:00:20:d4:14:4a:00:00 50:a0:39:00:00:00:00:00:00:00:00:00:14:c0:80:00:20:d4:14:c0:80:00 50:a0:39:00:00:00:00:00:00:00:00:00:14:4a:00:00:20:d4:14:4a:00:00 50:a0:39:00:00:00:00:00:00:00:00:00:14:c0:80:00:20:d4:14:c0:80:00 50:a0:39:00:00:00:00:00:00:00:00:00:14:4a:00:00:20:d4:14:4a:00:00 switch_prompt # 2-122 SmartCell 6A000/ZX-250 Reference Manual &F’4•az›apm -ˆÃ«•>ßÃÊˆ˜vœÀ“>Íˆœ˜Êœ˜ÊÍ…iÊ•ˆ˜Ž-Ã®ÊÝˆÍ…ˆ˜ÊÍ…iÊ+!!7Ê …ˆiÀ>ÀV…ßÊ>ÃÊÃii˜ÊvÀœ“ÊÍ…iÊ•œV>•Ê˜œ`i° Orig Port Id Remote Port Id Console Commands...
Page 147 Index Link Type : Horizontal Link Peer Group Id : 50:39:00:00:00:00:00:00:00:00:00:00:00:00 Aggr Token Remote Node Id: 50:a0:39:00:00:00:00:00:00:00:00:00:14:c0:80:00:20:d4:14:c0:80:00 Remote Port Id: 0x3 Vp Capability : FALSE Ptse Id : 0x5 Metrics Tag : 0x111112 switch_prompt # SmartCell 6A000/ZX-250 Reference Manual 2-123...
Page 148: Pnninetworknode
.iµÖi˜ViÊ˜Ö“LiÀÊœvÊÍ…iÊ˜œ`iÊ>ÃÊ>ÃÃˆ}˜i`ÊLßÊ Í…iÊVœ˜Ãœ•i° 3¤›z¤›˜6"•"hF›F• &F’4•az›apm Q!œ`iÊ7`R 7`i˜ÍˆvˆiÀÊVœ˜vˆ}ÖÀi`Êœ˜ÊÍ…iÊ˜œ`i° 7vÊ>ÊÃ«iVˆvˆVÊ!œ`i!Ö“ÊˆÃÊ}ˆÜi˜]ÊÍ…iÊvœ••œÝˆ˜}Êvˆi•`ÃÊ>ÀiÊ`ˆÃ«•>ßi`° Q+iiÀ5ÀœÖ«7`R 7`i˜ÍˆvˆiÀÊœvÊÍ…iÊ«iiÀÊ}ÀœÖ«ÊœvÊÍ…iÊœÀˆ}ˆ˜>Íˆ˜}Ê˜œ`i° Q"0 Ê"``ÀiÃÃR "0 Êi˜`ÊÃßÃÍi“Ê>``ÀiÃÃÊœvÊÍ…iÊœÀˆ}ˆ˜>Íˆ˜}Ê˜œ`i° Q-iÃÍÊ0À>˜ÃˆÍR 7˜`ˆV>ÍiÃÊÝ…iÍ…iÀÊÍ…iÊœÀˆ}ˆ˜>Íˆ˜}Ê˜œ`iÊˆÃÊÀiÃÍÀˆVÍi`ÊÍœÊœ˜•ßÊ>••œÝÊÃÖ««œÀÍÊœvÊ.7+ÃÊ œÀˆ}ˆ˜>Íˆ˜}ÊœÀÊÍiÀ“ˆ˜>Íˆ˜}Ê>ÍÊˆÍÃÊ•œV>Íˆœ˜°Ê0ÀÖiÊˆ˜`ˆV>ÍiÃÊÍ…>ÍÊÍ…iÊÍÀ>˜ÃˆÍÊV>«>Lˆ•ˆÍˆiÃÊ>ÀiÊ ÀiÃÍÀˆVÍi`ÆÊÍ…>ÍÊˆÃ]ÊÍÀ>˜ÃˆÍÊVœ˜˜iVÍˆœ˜ÃÊ>ÀiÊ˜œÍÊ>••œÝi`°Ê4>•ÃiÊˆ˜`ˆV>ÍiÃÊÍ…>ÍÊÍÀ>˜ÃˆÍÊ Vœ˜˜iVÍˆœ˜ÃÊ>ÀiÊ>••œÝi`°Ê0…ˆÃÊ>ÍÍÀˆLÖÍiÊÀiv•iVÍÃÊÍ…iÊÃiÍÍˆ˜}ÊœvÊÍ…iÊÀiÃÍÀˆVÍi`ÊÍÀ>˜ÃˆÍÊLˆÍÊ ÀiViˆÜi`Êˆ˜ÊÍ…iÊ˜œ`>•Êˆ˜vœÀ“>Íˆœ˜Ê+0..ÊœvÊÍ…iÊœÀˆ}ˆ˜>Íˆ˜}Ê˜œ`i° Q+œ“«•iÞÊ-i«R 7˜`ˆV>ÍiÃÊÝ…iÍ…iÀÊÍ…iÊœÀˆ}ˆ˜>Íˆ˜}Ê˜œ`iÊÖÃiÃÊÍ…iÊVœ“«•iÞÊ˜œ`iÊÀi«ÀiÃi˜Í>Íˆœ˜°Ê0ÀÖiÊ ˆ˜`ˆV>ÍiÃÊÍ…iÊÃ«œŽiÃÊ>˜`ÊLß«>ÃÃiÃÊÍ…>ÍÊ“>ŽiÊÖ«ÊÍ…iÊVœ“«•iÞÊ˜œ`iÊÀi«ÀiÃi˜Í>Íˆœ˜ÊÃ…œÖ•`ÊLiÊ vœÖ˜`Êˆ˜ÊÍ…iÊ«˜˜ˆ >«0>L•i°Ê0…ˆÃÊ>ÍÍÀˆLÖÍiÊÀiv•iVÍÃÊÍ…iÊÃiÍÍˆ˜}ÊœvÊÍ…iÊ˜œ`>•ÊÀi«ÀiÃi˜Í>Íˆœ˜Ê LˆÍÊÀiViˆÜi`Êˆ˜ÊÍ…iÊ˜œ`>•Êˆ˜vœÀ“>Íˆœ˜Ê+0..ÊœvÊÍ…iÊœÀˆ}ˆ˜>Íˆ˜}Ê˜œ`i° Q-iÃÍÊ*À>˜V…ˆ˜}R 7˜`ˆV>ÍiÃÊÝ…iÍ…iÀÊÍ…iÊœÀˆ}ˆ˜>Íˆ˜}Ê˜œ`iÊˆÃÊ>L•iÊÍœÊÃÖ««œÀÍÊ>``ˆÍˆœ˜>•ÊLÀ>˜V…iÃ°ÊÊ4>•ÃiÊ ˆ˜`ˆV>ÍiÃÊˆÍÊV>˜ÊÃÖ««œÀÍÊ>``ˆÍˆœ˜>•ÊLÀ>˜V…iÃ°Ê0…ˆÃÊ>ÍÍÀˆLÖÍiÊÀiv•iVÍÃÊÍ…iÊÃiÍÍˆ˜}ÊœvÊÍ…iÊ ÀiÃÍÀˆVÍi`ÊLÀ>˜V…ˆ˜}ÊLˆÍÊÀiViˆÜi`Êˆ˜ÊÍ…iÊ˜œ`>•Êˆ˜vœÀ“>Íˆœ˜Ê+0..ÊœvÊÍ…iÊœÀˆ}ˆ˜>Íˆ˜}Ê˜œ`i° 2-124 SmartCell 6A000/ZX-250 Reference Manual Console Commands ="d¤F—)aFd=˜9a«F &FO"¤d› +œÃˆÍˆÜiÊˆ˜Íi}iÀÊœÀÊ">> ">>...
Page 149 7˜`ˆV>ÍiÃÊÝ…iÍ…iÀÊÍ…iÊœÀˆ}ˆ˜>Íˆ˜}Ê˜œ`iÊˆÃÊVÖÀÀi˜Í•ßÊœ«iÀ>Íˆ˜}Êˆ˜ÊÍœ«œ•œ}ßÊ`>Í>L>ÃiÊœÜiÀ•œ>`Ê ÃÍ>Íi°Ê0…ˆÃÊ>ÍÍÀˆLÖÍiÊ…>ÃÊÍ…iÊÃ>“iÊÜ>•ÖiÊ>ÃÊÍ…iÊ!œ˜†ÍÀ>˜ÃˆÍÊvœÀÊ+5>Ê.•iVÍˆœ˜ÊLˆÍÊˆ˜ÊÍ…iÊ˜œ`>•Ê ˆ˜vœÀ“>Íˆœ˜Ê}ÀœÖ«ÊœÀˆ}ˆ˜>Íi`ÊLßÊÍ…ˆÃÊ˜œ`i° Q>i>`iÀRÊ 7˜`ˆV>ÍiÃÊÝ…iÍ…iÀÊÍ…iÊœÀˆ}ˆ˜>Íˆ˜}Ê˜œ`iÊV•>ˆ“ÃÊÍœÊLiÊ+iiÀÊ5ÀœÖ«Ê>i>`iÀÊœvÊˆÍÃÊ«iiÀÊ}ÀœÖ«°Ê 0…ˆÃÊ>ÍÍÀˆLÖÍiÊÀiv•iVÍÃÊÍ…iÊÃiÍÍˆ˜}ÊœvÊÍ…iÊ7Ê"“Ê>i>`iÀÊLˆÍÊÀiViˆÜi`Êˆ˜ÊÍ…iÊ˜œ`>•Êˆ˜vœÀ“>Íˆœ˜Ê +0..ÊœvÊÍ…iÊœÀˆ}ˆ˜>Íˆ˜}Ê˜œ`i° Q>i>`iÀÊ+ÀˆœÀˆÍßR 0…iÊ•i>`iÀÃ…ˆ«Ê«ÀˆœÀˆÍßÊÜ>•ÖiÊ>`ÜiÀÍˆÃi`ÊLßÊÍ…iÊœÀˆ}ˆ˜>Íˆ˜}Ê˜œ`i° Q+ÀiviÀÀi`Ê+5>R 8…i˜ÊÍ…iÊœÀˆ}ˆ˜>Íˆ˜}Ê˜œ`iÊˆÃÊ>Ê+iiÀÊ5ÀœÖ«>•i>`iÀ]ÊÍ…ˆÃÊˆ˜`ˆV>ÍiÃÊÍ…iÊ˜œ`iÊ7-ÊœvÊÍ…iÊ«>Ài˜ÍÊ >5!°Ê7vÊÍ…iÊœÀˆ}ˆ˜>Íˆ˜}Ê˜œ`iÊˆÃÊ˜œÍÊ•i>`iÀÊœvÊˆÍÃÊ«iiÀÊ}ÀœÖ«]ÊÍ…ˆÃÊ>ÍÍÀˆLÖÍiÊˆÃÊÃiÍÊÍœÊ!2>>° Q+>Ài˜ÍÊ!œ`iÊ7`R 8…i˜ÊÍ…iÊœÀˆ}ˆ˜>Íˆ˜}Ê˜œ`iÊˆÃÊ>Ê+iiÀÊ5ÀœÖ«Ê>i>`iÀ]ÊÍ…ˆÃÊˆ˜`ˆV>ÍiÃÊÍ…iÊ˜œ`iÊ7-ÊœvÊÍ…iÊ«>Ài˜ÍÊ >5!°Ê7vÊÍ…iÊœÀˆ}ˆ˜>Íˆ˜}Ê˜œ`iÊˆÃÊ˜œÍÊ•i>`iÀÊœvÊˆÍÃÊ«iiÀÊ}ÀœÖ«]ÊÍ…ˆÃÊ>ÍÍÀˆLÖÍiÊˆÃÊÃiÍÊÍœÊ!2>>° Q+>Ài˜ÍÊ"0 Ê"``ÀR 8…i˜ÊÍ…iÊœÀˆ}ˆ˜>Íˆ˜}Ê˜œ`iÊˆÃÊ>Ê+iiÀÊ5ÀœÖ«Ê>i>`iÀ]ÊÍ…ˆÃÊˆ˜`ˆV>ÍiÃÊÍ…iÊ"0 Ê>``ÀiÃÃÊœvÊÍ…iÊ «>Ài˜ÍÊ>5!°Ê7vÊÍ…iÊœÀˆ}ˆ˜>Íˆ˜}Ê˜œ`iÊˆÃÊ˜œÍÊ•i>`iÀÊœvÊˆÍÃÊ«iiÀÊ}ÀœÖ«]ÊÍ…ˆÃÊ>ÍÍÀˆLÖÍiÊˆÃÊÃiÍÊÍœÊ !2>>° Q+>Ài˜ÍÊ+5Ê7`RÊ 8…i˜ÊÍ…iÊœÀˆ}ˆ˜>Íˆ˜}Ê˜œ`iÊˆÃÊ>Ê+iiÀÊ5ÀœÖ«Ê>i>`iÀ]ÊÍ…ˆÃÊˆ˜`ˆV>ÍiÃÊÍ…iÊ˜œ`i¿ÃÊ«>Ài˜ÍÊ«iiÀÊ }ÀœÖ«Ê7-°Ê7vÊÍ…iÊœÀˆ}ˆ˜>Íˆ˜}Ê˜œ`iÊˆÃÊ˜œÍÊ•i>`iÀÊœvÊˆÍÃÊ«iiÀÊ}ÀœÖ«]ÊÍ…ˆÃÊ>ÍÍÀˆLÖÍiÊˆÃÊÃiÍÊÍœÊ !2>>° Description 3zF•"›p• 6"•"hF›F•’˜—˜6F•ha’’apm’ show [NodeNum] <nodenum> pnninetworknode "`“ˆ˜ˆÃÍÀ>ÍœÀ &F’4•az›apm -ˆÃ«•>ßÃÊ˜œ`iÃÊÝˆÍ…ˆ˜ÊÍ…iÊ+!!7Ê…ˆiÀ>ÀV…ß° SmartCell 6A000/ZX-250 Reference Manual 2-125...
Page 151: Pnninode
Q!œ`i>iÜi•R "ÊLˆÍ†ÃÍÀˆ˜}Ê•i˜}Í…ÊÍ…>ÍÊˆ˜`ˆV>ÍiÃÊ+!!7Ê ÀœÖÍˆ˜}Ê•iÜi•°Ê0…iÊ…ˆ}…iÀÊÍ…iÊ˜Ö“LiÀ]ÊÍ…iÊ •œÝiÀÊÍ…iÊ+!!7Ê•iÜi•° Q!œ`i"Í“"``ÀiÃÃR "0 Ê>``ÀiÃÃÊœvÊÍ…iÊÃÝˆÍV…° 3¤›z¤›˜6"•"hF›F• &F’4•az›apm Q!œ`iÊ7`R !œ`iÊˆ`i˜ÍˆvˆiÀÊ>ÃÃˆ}˜i`ÊÍœÊÍ…iÊÃÝˆÍV…° Q>œÝiÃÍÊ>iÜi•R 7˜`ˆV>ÍiÃÊÝ…iÍ…iÀÊÍ…iÊÃÝˆÍV…Ê>VÍÃÊ>ÃÊ>Ê•œÝiÃÍ†•iÜi•Ê˜œ`iÊœÀÊÝ…iÍ…iÀÊˆÍÊˆÃÊ>Ê•œ}ˆV>•Ê˜œ`iÊÍ…>ÍÊ LiVœ“iÃÊ>VÍˆÜiÊÝ…i˜Êœ˜iÊœvÊÍ…iÊœÍ…iÀÊ˜œ`iÃÊˆ˜ÊÍ…iÊÃÝˆÍV…ˆ˜}ÊÃßÃÍi“ÊLiVœ“iÃÊ>Ê+iiÀÊ5ÀœÖ«Ê >i>`iÀ°Ê+œÃÃˆL•iÊÜ>•ÖiÃÊ>ÀiÊ0ÀÖiÊœÀÊ4>•Ãi° Q"`“ˆ˜Ê.Í>ÍÖÃR 7˜`ˆV>ÍiÃÊ>`“ˆ˜ˆÃÍÀ>ÍˆÜiÊÃÍ>ÍÖÃÊœvÊÍ…iÊÃÝˆÍV…Ê-2«ÊœÀÊ-œÝ˜®° Q#«iÀÊ.Í>ÍÖÃRÊ 7˜`ˆV>ÍiÃÊÝ…iÍ…iÀÊÍ…iÊÃÝˆÍV…Ê-2«ÊœÀÊ-œÝ˜®° Q"0 Ê"``ÀiÃÃRÊ "0 Ê>``ÀiÃÃÊœvÊÍ…iÊÃÝˆÍV…° Q+iiÀÊ5ÀœÖ«Ê7`RÊ 7`i˜ÍˆvˆiÀÊœvÊÍ…iÊ«iiÀÊ}ÀœÖ«ÊœvÊÝ…ˆV…ÊÍ…iÊÃÝˆÍV…ÊˆÃÊ>Ê«>ÀÍ° Q-ÃÍÊ0À>˜ÃˆÍRÊ 7˜`ˆV>ÍiÃÊÝ…iÍ…iÀÊœÀÊ˜œÍÊÍ…iÊÃÝˆÍV…ÊˆÃÊÀiÃÍÀˆVÍi`ÊÍœÊ˜œÍÊ>••œÝˆ˜}ÊÃÖ««œÀÍÊœvÊ.7+ÃÊÍÀ>˜ÃˆÍˆ˜}ÊˆÍ° Q+œ“«•iÞÊ-i«°R 7˜`ˆV>ÍiÃÊÝ…iÍ…iÀÊœÀÊ˜œÍÊÍ…iÊÃÝˆÍV…ÊÖÃiÃÊÍ…iÊVœ“«•iÞÊ˜œ`iÊÀi«ÀiÃi˜Í>Íˆœ˜°Ê0ÀÖiÊˆ˜`ˆV>ÍiÃÊ Vœ“«•iÞÊ˜œ`iÊÀi«ÀiÃi˜Í>Íˆœ˜ÊˆÃÊÖÃi`°Ê4>•ÃiÊˆ˜`ˆV>ÍiÃÊÃˆ“«•iÊ˜œ`iÊÀi«ÀiÃi˜Í>Íˆœ˜ÊˆÃÊÖÃi`° ="d¤F—)aFd=˜9a«F &FO"¤d› äÊ†Ê£ä{ nä ˜É> SmartCell 6A000/ZX-250 Reference Manual 2-127...
Page 152 Lowest Level: Yes Admin Status: Up Oper Status: Up ATM Address: 39:00:00:00:00:00: 00:00:00:00:00:12:34:00:00:00:00:22:33:00 Peer Group ID: 60:39:00:00:00:00:00: 00:00:00:00:00:12:00 Rst Transit: FALSE Rst Branching: FALSE DB Overload: FALSE Ptse: 9 switch_prompt # 2-128 SmartCell 6A000/ZX-250 Reference Manual &F’4•az›apm .iÍÃÊ+!!7Ê˜œ`iÊˆ˜vœÀ“>Íˆœ˜ÊvœÀÊÍ…iÊÃÝˆÍV…° -ˆÃ«•>ßÃÊ+!!7Ê˜œ`iÊˆ˜vœÀ“>Íˆœ˜ÊvœÀÊÍ…iÊÃÝˆÍV…° Console Commands...
Page 153: Pnninodetimer
ãœ˜Í>•Ê-•œ}ˆV>•®Ê•ˆ˜ŽÊvœÀÊÝ…ˆV…ÊˆÍÊ…>ÃÊ˜œÍÊ ÀiViˆÜi`Ê>˜`Ê«ÀœViÃÃi`Ê>Ê>5!Ê…œÀˆãœ˜Í>•Ê •ˆ˜ŽÊˆ˜vœÀ“>Íˆœ˜Ê}ÀœÖ«°Ê Q+0..-ivÀiÃ…7˜ÍiÀÜ>•R 7˜ÍiÀÜ>•Ê>ÍÊÝ…ˆV…ÊÍ…iÊÃÝˆÍV…Ê`ÀˆÜiÃÊœÀˆ}ˆ˜>† Íˆœ˜Ê+0..ÃÊˆ˜ÊÍ…iÊ>LÃi˜ViÊœvÊÍÀˆ}}iÀi`Ê Ö«`>ÍiÃ°Ê Q+0..>ˆviÍˆ“i4>VÍœÀR "ÊÜ>•ÖiÊ-iÞ«ÀiÃÃi`Ê>ÃÊ>Ê«iÀVi˜Í>}i®ÊÖÃi`ÊÍœÊ V>•VÖ•>ÍiÊÍ…iÊˆ˜ˆÍˆ>•ÊÍˆ“iÊœvÊÃi•v†œÀˆ}ˆ˜>Íi`Ê +0..Ã°Ê0…iÊÀiÃÖ•ÍÊœvÊ“Ö•Íˆ«•ßˆ˜}ÊÍ…iÊ +0..-ivÀiÃ…7˜ÍiÀÜ>•ÊLßÊÍ…ˆÃÊÜ>•ÖiÊˆÃÊÍ…iÊˆ˜ˆ† Íˆ>•Ê•ˆviÍˆ“iÊÍ…iÊÃÝˆÍV…Ê«•>ViÃÊˆ˜ÍœÊÃi•v†œÀˆ}ˆ† ˜>Íi`Ê+0..Ã°Ê ="d¤F—)aFd=˜9a«F &FO"¤d› +œÃˆÍˆÜiÊˆ˜Íi}iÀÊˆ˜ÊÖ˜ˆÍÃÊœvÊ £ä £ääÊ“ˆVÀœÃiVœ˜`Ã° +œÃˆÍˆÜiÊˆ˜Íi}iÀÊˆ˜ÊÖ˜ˆÍÃÊœvÊ £ä £ääÊ“ˆVÀœÃiVœ˜`Ã° +œÃˆÍˆÜiÊˆ˜Íi}iÀÊˆ˜ÊÖ˜ˆÍÃÊœvÊ £x ÃiVœ˜`Ã° +œÃˆÍˆÜiÊˆ˜Íi}iÀ° +œÃˆÍˆÜiÊˆ˜Íi}iÀÊˆ˜ÊÖ˜ˆÍÃÊœvÊ £Ôä ÃiVœ˜`Ã° +œÃˆÍˆÜiÊˆ˜Íi}iÀÊˆ˜ÊÖ˜ˆÍÃÊœvÊ £nää ÃiVœ˜`Ã° +œÃˆÍˆÜiÊˆ˜Íi}iÀÊvÀœ“Ê Ôää £ä£†£äää° SmartCell 6A000/ZX-250 Reference Manual 2-129...
Page 154 Descriptions 3zF•"›p• 6"•"hF›F•’˜—˜6F•ha’’apm’ modify [PtseHolddown] <ptseholddown> pnninodetimer [HelloHolddown] <helloholddown> [HelloInterval] <hellointerval> [HelloInactivityFactor] <helloinactivityfactor> [HorizontalLinkInactivityTimer] <horizontallinkinactivitytimer> [PTSERefreshInterval] <ptserefreshinterval> [PTSELifetimeFactor] <ptselifetimefactor> [RxmInterval] <rxminterval> [PeerDelayedAckInterval] <peerdelayedackinterval> "`“ˆ˜ˆÃÍÀ>ÍœÀ 2-130 SmartCell 6A000/ZX-250 Reference Manual Console Commands ="d¤F—)aFd=˜9a«F &FO"¤d› +œÃˆÍˆÜiÊˆ˜Íi}iÀÊˆ˜ÊÖ˜ˆÍÃÊœvÊ ÃiVœ˜`Ã° +œÃˆÍˆÜiÊˆ˜Íi}iÀÊˆ˜ÊÖ˜ˆÍÃÊœvÊ £ä £ääÊ“ˆVÀœÃiVœ˜`Ã° &F’4•az›apm .iÍÃÊ+!!7Ê«ÀœÍœVœ•ÊÍˆ“iÀÊÜ>•ÖiÃ°...
Page 156: Pnnipglelection
>vÍiÀÊ…>Üˆ˜}Êˆ˜ˆÍˆ>•ˆãi`Êœ«iÀ>Íˆœ˜Ê>˜`Ê Ài>V…i`ÊÍ…iÊ4Ö••ÊÃÍ>ÍiÊÝˆÍ…Ê>ÍÊ•i>ÃÍÊœ˜iÊ ˜iˆ}…LœÀÊˆ˜ÊÍ…iÊ«iiÀÊ}ÀœÖ«°Ê Q#ÜiÀÀˆ`i-i•>ßR 0ˆ“iÊˆ˜ÊÃiVœ˜`ÃÊÍ…iÊÃÝˆÍV…ÊÝ>ˆÍÃÊvœÀÊˆÍÃi•vÊ ÍœÊLiÊ`iV•>Ài`ÊÍ…iÊ«ÀiviÀÀi`Ê+5>ÊLßÊ Ö˜>˜ˆ“œÖÃÊ>}Àii“i˜ÍÊ>“œ˜}ÊˆÍÃÊ«iiÀÃ°Ê7˜Ê Í…iÊ>LÃi˜ViÊœvÊÖ˜>˜ˆ“œÖÃÊ>}Àii“i˜Í]ÊÍ…ˆÃÊ ˆÃÊÍ…iÊÍˆ“iÊÍ…>ÍÊ«>ÃÃiÃÊLivœÀiÊÍ…iÊÃÝˆÍV…Ê Vœ˜Ãˆ`iÀÃÊ>ÊÍÝœÊÍ…ˆÀ`ÃÊ“>•œÀˆÍßÊ>ÃÊ ÃÖvvˆVˆi˜ÍÊ>}Àii“i˜ÍÊÍœÊ`iV•>ÀiÊˆÍÃi•vÊ+iiÀÊ 5ÀœÖ«Ê>i>`iÀ]Ê>L>˜`œ˜ˆ˜}ÊÍ…iÊ>ÍÍi“«ÍÊÍœÊ }iÍÊÖ˜>˜ˆ“œÖÃÊ>}Àii“i˜Í°Ê Q-i.•iVÍˆœ˜0ˆ“iR 0ˆ“iÊˆ˜ÊÃiVœ˜`ÃÊ>vÍiÀÊ•œÃˆ˜}ÊVœ˜˜iVÍˆÜˆÍßÊ ÍœÊÍ…iÊVÖÀÀi˜ÍÊ+iiÀÊ5ÀœÖ«Ê>i>`iÀÊÍ…>ÍÊÍ…iÊ ÃÝˆÍV…ÊÝ>ˆÍÃÊLivœÀiÊÀi†ÃÍ>ÀÍˆ˜}ÊÍ…iÊ«ÀœViÃÃÊ œvÊi•iVÍˆ˜}Ê>Ê˜iÝÊ+iiÀÊ5ÀœÖ«Ê>i>`iÀ°Ê 3¤›z¤›˜6"•"hF›F• &F’4•az›apm Q>i>`iÀÃ…ˆ«Ê+ÀˆœÀˆÍßR >i>`iÀÃ…ˆ«Ê«ÀˆœÀˆÍßÊÜ>•ÖiÊÍ…iÊÃÝˆÍV…Ê>`ÜiÀÍˆÃiÃÊˆ˜ÊˆÍÃÊ˜œ`>•Êˆ˜vœÀ“>Íˆœ˜Ê}ÀœÖ«ÊvœÀÊˆÍÃÊ«iiÀÊ }ÀœÖ«°Ê0…ˆÃÊˆÃÊ>˜Êˆ˜Íi}iÀ° Q0ˆ“iÊ.Í>“«R 0ˆ“iÊ>ÍÊÝ…ˆV…ÊÍ…iÊVÖÀÀi˜ÍÊ+iiÀÊ5ÀœÖ«Ê>i>`iÀÊiÃÍ>L•ˆÃ…i`ÊˆÍÃi•v° 2-132 SmartCell 6A000/ZX-250 Reference Manual Console Commands ="d¤F—)aFd=˜9a«F &FO"¤d› +œÃˆÍˆÜiÊˆ˜Íi}iÀ £x +œÃˆÍˆÜiÊˆ˜Íi}iÀ Ïä +œÃˆÍˆÜiÊˆ˜Íi}iÀ £x...
Page 157 Console Commands 3¤›z¤›˜6"•"hF›F• &F’4•az›apm Q.•iVÍˆœ˜Ê.Í>ÍiR 7˜`ˆV>ÍiÃÊÍ…iÊÃÍ>ÍiÊÍ…>ÍÊÍ…iÊÃÝˆÍV…ÊˆÃÊˆ˜ÊÝˆÍ…ÊÀiÃ«iVÍÊÍœÊÍ…iÊ+iiÀÊ5ÀœÖ«Ê>i>`iÀÊi•iVÍˆœ˜ÊÍ…>ÍÊ Í>ŽiÃÊ«•>ViÊˆ˜ÊÍ…iÊ«iiÀÊ}ÀœÖ«°Ê+œÃÃˆL•iÊÜ>•ÖiÃÊ>ÀiÊ.Í>ÀÍˆ˜}]Ê"Ý>ˆÍˆ˜}]Ê"Ý>ˆÍˆ˜}Ê4Ö••]Ê7˜ˆÍˆ>•Ê -i•>ß]Ê+>•VÖ•>Íˆ˜}]Ê"Ý>ˆÍÊ2˜>˜ˆ“ˆÍß]Ê#«iÀ>Íˆ˜}Ê>ÃÊ+5>]Ê#«iÀ>Íˆ˜}Ê˜œÍÊ>ÃÊ+5>]Ê6Ö˜}Ê .•iVÍˆœ˜]Ê>˜`Ê8>ˆÍˆ˜}Ê-ii•iVÍˆœ˜° Q+iiÀÊ5ÀœÖ«Ê>i>`iÀR 7`i˜ÍˆvˆiÀÊœvÊÍ…iÊ˜œ`iÊÍ…>ÍÊˆÃÊVÖÀÀi˜Í•ßÊ+iiÀÊ5ÀœÖ«Ê>i>`iÀ°Ê7vÊ>Ê+iiÀÊ5ÀœÖ«Ê>i>`iÀÊ…>ÃÊ˜œÍÊ Lii˜Êi•iVÍi`]ÊÍ…ˆÃÊ«>À>“iÍiÀÊˆÃÊÃiÍÊÍœÊ->••®ÊãiÀœ-Ã®° Q"VÍˆÜiÊ+>Ài˜ÍÊ7` !œ`iÊˆ`i˜ÍˆvˆiÀÊÖÃi`ÊLßÊÍ…iÊ+iiÀÊ5ÀœÖ«Ê>i>`iÀÊÍœÊÀi«ÀiÃi˜ÍÊÍ…ˆÃÊ«iiÀÊ}ÀœÖ«Ê>ÍÊÍ…iÊ˜iÞÍÊ•iÜi•Ê œvÊÍ…iÊ…ˆiÀ>ÀV…ß°ÊÊ7vÊÍ…ˆÃÊ˜œ`iÊˆÃÊ>ÍÊÍ…iÊ…ˆ}…iÃÍÊ•iÜi•ÊœvÊÍ…iÊ…ˆiÀ>ÀV…ßÊœÀÊˆvÊ˜œÊ+5>Ê…>ÃÊLii˜Ê i•iVÍi`ÊßiÍ]ÊÍ…iÊ+!!7Ê+ÀœÍœVœ•Ê.˜ÍˆÍßÊÃiÍÃÊÍ…iÊÜ>•ÖiÊœvÊÍ…ˆÃÊ>ÍÍÀˆLÖÍiÊÍœÊ!2>>° Descriptions 3zF•"›p• 6"•"hF›F•’˜—˜6F•ha’’apm’ modify [InitTime] <inittime> pnnipglelection [OverrideDelay] <override delay> [ReElectionTime] <reelectiontime> "`“ˆ˜ˆÃÍÀ>ÍœÀ "`“ˆ˜ˆÃÍÀ>ÍœÀ show pnnipglelection &F’4•az›apm .iÍÃÊ+!!7Êi•iVÍˆœ˜Ê«>À>“iÍiÀÃÊvœÀÊÍ…iÊÃÝˆÍV…° -ˆÃ«•>ßÃÊ+!!7Êi•iVÍˆœ˜Ê«>À>“iÍiÀÃÊvœÀÊÍ…iÊÃÝˆÍV…° SmartCell 6A000/ZX-250 Reference Manual 2-133...
Page 159: Pnniptse
Operator show Parameters ,mz¤›˜6"•"hF›F• &F’4•az›apm Q!œ`i!Ö“R .iµÖi˜ViÊ˜Ö“LiÀÊ>ÃÃˆ}˜i`ÊLßÊÍ…iÊVœ˜Ãœ•iÊÍ…>ÍÊ ˆ˜`ˆV>ÍiÃÊÝ…ˆV…Ê˜œ`iÊœÀˆ}ˆ˜>Íˆ˜}ÊÍ…iÊ+0..ÊˆÃÊ `ˆÃ«•>ßi`° 3¤›z¤›˜6"•"hF›F• &F’4•az›apm Q#Àˆ}ˆ˜>Íˆ˜}Ê!œ`iÊ7`R 7`i˜ÍˆvˆiÀÊœvÊÍ…iÊ˜œ`iÊÍ…>ÍÊœÀˆ}ˆ˜>Íi`ÊÍ…iÊ+0..-Ã®° Q+ÍÃiÊ+œÖ˜ÍR !Ö“LiÀÊœvÊ+0..ÃÊvÀœ“ÊÍ…iÊœÀˆ}ˆ˜>Íˆ˜}Ê˜œ`iÊˆ˜ÊÍ…iÊÍœ«œ•œ}ˆV>•Ê`>Í>L>ÃiÊœvÊÍ…iÊÃÝˆÍV…° 7vÊ>ÊÃ«iVˆvˆVÊ!œ`i!Ö“ÊˆÃÊ}ˆÜi˜]ÊÍ…iÊvœ••œÝˆ˜}Êvˆi•`ÃÊ>ÀiÊ`ˆÃ«•>ßi`° Q0ß«iR 0ß«iÊœvÊˆ˜vœÀ“>Íˆœ˜ÊVœ˜Í>ˆ˜i`Êˆ˜ÊÍ…iÊ+0..°Ê+œÃÃˆL•iÊÜ>•ÖiÃÊ>Ài\Ê!œ`>•Ê.Í>ÍiÊ+>À>“iÍiÀÃ]Ê !œ`>•Ê7˜vœÀ“>Íˆœ˜]Ê7˜ÍiÀ˜>•Ê"``ÀiÃÃiÃ]Ê.ÞÍiÀˆœÀÊ"``ÀiÃÃiÃ]Ê6œÀˆãœ˜Í>•Ê>ˆ˜ŽÃ]Ê>˜`Ê2«•ˆ˜ŽÃ°Ê Q+ÍÃiÊ7`R +0..Êˆ`i˜ÍˆvˆiÀÊ>ÃÃˆ}˜i`ÊÍœÊÍ…iÊ+0..ÊLßÊˆÍÃÊœÀˆ}ˆ˜>ÍœÀ°Ê-ˆÃ«•>ßi`Ê>ÃÊ>˜Êˆ˜Íi}iÀÊˆ˜Ê…iÞ>`iVˆ† “>•ÊvœÀ“>Í° Q.iµÊ!Ö“R .iµÖi˜ViÊ˜Ö“LiÀÊœvÊÍ…iÊˆ˜ÃÍ>˜ViÊœvÊÍ…iÊ+0..Ê>ÃÊˆÍÊ>««i>ÀÃÊˆ˜ÊÍ…iÊ•œV>•ÊÍœ«œ•œ}ßÊ`>Í>L>Ãi°Ê "˜Êˆ˜Íi}iÀÊˆ˜Ê…iÞˆ`iVˆ“>•ÊvœÀ“>Í° Q+…iVŽÃÖ“R 0…iÊÜ>•ÖiÊœvÊÍ…iÊ+0..ÊV…iVŽÃÖ“Ê>ÃÊˆÍÊ>««i>ÀÃÊˆ˜ÊÍ…iÊ•œV>•ÊÍœ«œ•œ}ßÊ`>Í>L>Ãi°Ê"˜Êˆ˜Íi}iÀÊˆ˜Ê …iÞ>`iVˆ“>•ÊvœÀ“>Í°Ê Q>ˆviÍˆ“iR 0…iÊÜ>•ÖiÊœvÊÍ…iÊÀi“>ˆ˜ˆ˜}Ê•ˆviÍˆ“iÊvœÀÊÍ…iÊ}ˆÜi˜Ê+0..Ê>ÃÊˆÍÊ>««i>ÀÃÊˆ˜ÊÍ…iÊ•œV>•ÊÍœ«œ•œ}ßÊ `>Í>L>Ãi°Ê.Þ«ÀiÃÃi`Êˆ˜ÊÃiVœ˜`Ã° ="d¤F—)aFd=˜9a«F &FO"¤d› +œÃˆÍˆÜiÊˆ˜Íi}iÀÊœÀÊ">> ">> SmartCell 6A000/ZX-250 Reference Manual 2-135...
Page 160 # show pnniptse PTSE from Node #1 Node Id : 50:a0:39:00:00:00:00:00:00:00:00:00:14:4a:00:00:20:d4:14:4a:00:00 Type Description PTSE Id ================================================================================ Nodal information Horizontal links Exterior address switch_prompt # 2-136 SmartCell 6A000/ZX-250 Reference Manual &F’4•az›apm -ˆÃ«•>ßÃÊ+0..ÃÊˆ˜ÊÍœ«œ•œ}ßÊ`>Í>L>ÃiÊœvÊÃÝˆÍV…° Seq No. Checksum Lifetime 0x58da 0x5d36 0xc4b3 337 secs Console Commands...
Page 161: Pnnireachableaddress
&F’4•az›apm Q"``À!Ö“R .iµÖi˜ViÊ˜Ö“LiÀÊvœÀÊÍ…iÊ Ài>V…>L•iÊ>``ÀiÃÃ°Ê"ÃÃˆ}˜i`Ê LßÊÍ…iÊVœ˜Ãœ•i° 3¤›z¤›˜6"•"hF›F• &F’4•az›apm Q"``ÀiÃÃR "0 Êi˜`ÊÃßÃÍi“Ê>``ÀiÃÃÊ«ÀivˆÞ° Q+ÀivˆÞÊ>i˜}Í…R >i˜}Í…ÊœvÊ"0 Ê>``ÀiÃÃÊ«ÀivˆÞ° Q"`ÜiÀÊ!œ`iÊ7` !œ`iÊ7-ÊœvÊ>Ê˜œ`iÊ>`ÜiÀÍˆÃˆ˜}ÊÀi>V…>Lˆ•ˆÍßÊÍœÊÍ…iÊ>``ÀiÃÃÊ«ÀivˆÞ° Q"`ÜiÀÊ+œÀÍÊ7`R +œÀÍÊˆ`i˜ÍˆvˆiÀÊÖÃi`ÊvÀœ“ÊÍ…iÊ>`ÜiÀÍˆÃˆ˜}Ê˜œ`iÊÍœÊÀi>V…ÊÍ…iÊ}ˆÜi˜Ê>``ÀiÃÃÊ«ÀivˆÞ°Ê Q7˜`iÞR "˜Ê>ÀLˆÍÀ>ÀßÊˆ˜`iÞÊÖÃi`ÊÍœÊi˜Ö“iÀ>ÍiÊ>••ÊœvÊÍ…iÊ>``ÀiÃÃiÃÊ>`ÜiÀÍˆÃi`ÊLßÊÍ…iÊÃ«iVˆvˆi`Ê˜œ`i° Description 3zF•"›p• 6"•"hF›F•’˜—˜6F•ha’’apm’ show [AddrNum] <addrnum> pnnireachable "`“ˆ˜ˆÃÍÀ>ÍœÀ address ="d¤F—)aFd=˜9a«F &FO"¤d› +œÃˆÍˆÜiÊˆ˜Íi}iÀÊœÀÊ">> ">> &F’4•az›apm -ˆÃ«•>ßÃÊˆ˜vœÀ“>Íˆœ˜Êœ˜Ê>••ÊÀi>V…>L•iÊ>``ÀiÃÃiÃÊvÀœ“Êi>V…Ê ˜œ`iÊÜˆÃˆL•iÊÍœÊÍ…iÊÃÝˆÍV…° SmartCell 6A000/ZX-250 Reference Manual 2-137...
Page 162 47:00:01:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00 34:00:02:03:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00 49:02:03:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00 switch_prompt # switch_prompt # show pnnireachableaddress 1 Reachable Address No. 1 ================================================================================ Adver. Node Id: 50:a0:39:00:00:00:00:00:00:00:00:00:14:bf:80:00:20:d4:14:bf:80:00 Adver. Port Id: 0x1 Index Address : 38:01:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00 Prefix Length : 16 switch_prompt # 2-138 SmartCell 6A000/ZX-250 Reference Manual Console Commands...
Page 163: Pnniscopemapping
6ˆ}…iÃÍÊ•iÜi•ÊœvÊ+!!7Ê…ˆiÀ>ÀV…ßÊ-Ã“>••iÃÍÊ+!!7Ê ÀœÖÍˆ˜}Ê•iÜi•®ÊÍ…>ÍÊ•ˆiÃÊÝˆÍ…ˆ˜ÊÍ…iÊ2!7ÊÃVœ«iÊÜ>•ÖiÊ ˆ˜ÍÀ>.ˆÍi-x®° Q.ˆÍi+•ÖÃ#˜iR 6ˆ}…iÃÍÊ•iÜi•ÊœvÊ+!!7Ê…ˆiÀ>ÀV…ßÊ-Ã“>••iÃÍÊ+!!7Ê ÀœÖÍˆ˜}Ê•iÜi•®ÊÍ…>ÍÊ•ˆiÃÊÝˆÍ…ˆ˜ÊÍ…iÊ2!7ÊÃVœ«iÊÜ>•ÖiÊ ÃˆÍi+•ÖÃ#˜i-È®° Q#À}>˜ˆã>Íˆœ˜ ˆ˜ÖÃ#˜iR 6ˆ}…iÃÍÊ•iÜi•ÊœvÊ+!!7Ê…ˆiÀ>ÀV…ßÊ-Ã“>••iÃÍÊ+!!7Ê ÀœÖÍˆ˜}Ê•iÜi•®ÊÍ…>ÍÊ•ˆiÃÊÝˆÍ…ˆ˜ÊÍ…iÊ2!7ÊÃVœ«iÊÜ>•ÖiÊ œÀ}>˜ˆã>Íˆœ˜ ˆ˜ÖÃ#˜i-Ç®°Ê Q7˜ÍÀ>#À}>˜ˆã>Íˆœ˜R 6ˆ}…iÃÍÊ•iÜi•ÊœvÊ+!!7Ê…ˆiÀ>ÀV…ßÊ-Ã“>••iÃÍÊ+!!7Ê ÀœÖÍˆ˜}Ê•iÜi•®ÊÍ…>ÍÊ•ˆiÃÊÝˆÍ…ˆ˜ÊÍ…iÊ2!7ÊÃVœ«iÊÜ>•ÖiÊ ˆ˜ÍÀ>#À}>˜ˆã>Íˆœ˜-n®° ="d¤F—)aFd=˜9a«F &FO"¤d› ä†£ä{ ™È ä†£ä{ ™È ä†£ä{ ™È ä†£ä{ nä ä†£ä{ nä ä†£ä{ ÇÔ ä†£ä{ ÇÔ ä†£ä{ È{ SmartCell 6A000/ZX-250 Reference Manual 2-139...
Page 164 6ˆ}…iÃÍÊ•iÜi•ÊœvÊ+!!7Ê…ˆiÀ>ÀV…ßÊ-Ã“>••iÃÍÊ+!!7Ê ÀœÖÍˆ˜}Ê•iÜi•®ÊÍ…>ÍÊ•ˆiÃÊÝˆÍ…ˆ˜ÊÍ…iÊ2!7ÊÃVœ«iÊÜ>•ÖiÊ ˆ˜ÍÀ>+œ““Ö˜ˆÍß-££®° Q+œ““Ö˜ˆÍß+•ÖÃ#˜iR 6ˆ}…iÃÍÊ•iÜi•ÊœvÊ+!!7Ê…ˆiÀ>ÀV…ßÊ-Ã“>••iÃÍÊ+!!7Ê ÀœÖÍˆ˜}Ê•iÜi•®ÊÍ…>ÍÊ•ˆiÃÊÝˆÍ…ˆ˜ÊÍ…iÊœÀ}>˜ˆã>Íˆœ˜>•Ê ÃVœ«iÊÜ>•ÖiÊVœ““Ö˜ˆÍß+•ÖÃ#˜i-£Ô®° Q-i}ˆœ˜>•R 6ˆ}…iÃÍÊ•iÜi•ÊœvÊ+!!7Ê…ˆiÀ>ÀV…ßÊ-Ã“>••iÃÍÊ+!!7Ê ÀœÖÍˆ˜}Ê•iÜi•®ÊÍ…>ÍÊ•ˆiÃÊÝˆÍ…ˆ˜ÊÍ…iÊ2!7ÊÃVœ«iÊÜ>•ÖiÊ Ài}ˆœ˜>•-£Ï®° Q7˜ÍiÀ-i}ˆœ˜>•R 6ˆ}…iÃÍÊ•iÜi•ÊœvÊ+!!7Ê…ˆiÀ>ÀV…ßÊ-Ã“>••iÃÍÊ+!!7Ê ÀœÖÍˆ˜}Ê•iÜi•®ÊÍ…>ÍÊ•ˆiÃÊÝˆÍ…ˆ˜ÊÍ…iÊ2!7ÊÃVœ«iÊÜ>•ÖiÊ ˆ˜ÍiÀ-i}ˆœ˜>•-£{®° Q5•œL>•R 6ˆ}…iÃÍÊ•iÜi•ÊœvÊ+!!7Ê…ˆiÀ>ÀV…ßÊ-Ã“>••iÃÍÊ+!!7Ê ÀœÖÍˆ˜}Ê•iÜi•®ÊÍ…>ÍÊ•ˆiÃÊÝˆÍ…ˆ˜ÊÍ…iÊ2!7ÊÃVœ«iÊÜ>•ÖiÊ }•œL>•-£x®°Ê 2-140 SmartCell 6A000/ZX-250 Reference Manual Console Commands ="d¤F—)aFd=˜9a«F &FO"¤d› ä†£ä{ È{ ä†£ä{ È{ ä†£ä{ ä†£ä{ ä†£ä{ ÏÔ ä†£ä{ ÏÔ ä†£ä{ ä...
Page 165 [Regional] <regional> [Global] <global> "`“ˆ˜ˆÃÍÀ>ÍœÀ show pnniinterface Examples switch_prompt # modify pnniscopemapping LocalNetwork(96) LocalNetworkPlusOne(96) LocalNetworkPlusTwo(96) SiteMinusOne(80) IntraSite(80) SitePlusOne(72) OrganizationMinusOne(72) IntraOrganization(64) OrganizationPlusOne(64) CommunityMinusOne(64) IntraCommunity(48) CommunityPlusOne(48) Regional(32) InterRegional(32) Global(0) switch_prompt # &F’4•az›apm .iÍÃÊ“>««ˆ˜}ÃÊœvÊ“i“LiÀÃ…ˆ«Ê>˜`Ê œÀ}>˜ˆã>Íˆœ˜>•ÊÃVœ«iÊLiÍÝii˜Ê2!7Ê >˜`Ê+!!7° -ˆÃ«•>ßÃÊ“>««ˆ˜}ÃÊœvÊ“i“LiÀÃ…ˆ«Ê >˜`ÊœÀ}>˜ˆã>Íˆœ˜>•ÊÃVœ«iÊLiÍÝii˜Ê 2!7Ê>˜`Ê+!!7° SmartCell 6A000/ZX-250 Reference Manual 2-141...
Page 166 Intra Organization Organization Plus One Community Minus One Intra Community Community Plus One Regional Inter Regional Global switch_prompt # 2-142 SmartCell 6A000/ZX-250 Reference Manual : 96 : 96 : 96 : 80 : 80 : 72 : 72 : 64...
Page 167: Pnnistats
Console Commands PnniStats 2ÃiÊ+˜˜ˆ.Í>ÍÃÊÍœÊ`ˆÃ«•>ßÊ+!!7ÊÃÍ>ÍˆÃÍˆVÃÊvœÀÊÍ…iÊÃÝˆÍV…° Operator show Parameters 0…ˆÃÊ«>À>“iÍiÀÊ…>ÃÊ˜œÊˆ˜«ÖÍÊ«>À>“iÍiÀÃ°Ê<ÖÃÍÊÍß«iÊÃ…œÝÊ«˜˜ˆÃÍ>ÍÃÊ>ÍÊÍ…iÊÃÝˆÍV…Ê«Àœ“«Í° 3¤›z¤›˜6"•"hF›F• Q6ˆ}…iÃÍÊ7iÀÃˆœ˜R Q>œÝiÃÍÊ7iÀÃˆœ˜R Q-0>Ê+œÖ˜ÍÊ#Àˆ}ˆ˜>ÍœÀR Q+À>˜ŽL>VŽÊ+œÖ˜ÍÊ#Àˆ}ˆ˜>ÍœÀR Q"•ÍiÀ˜>ÍiÊ-œÖÍiÊ+œÖ˜ÍÊ#Àˆ}ˆ˜>ÍœÀR Q-œÖÍiÊ4>ˆ•Ê+œÖ˜ÍÊ#Àˆ}ˆ˜>ÍœÀR Q-œÖÍiÊ4>ˆ•Ê2˜Ài>V…>L•iÊ#Àˆ}ˆ˜>ÍœÀR &F’4•az›apm 0…iÊ…ˆ}…iÃÍÊÜiÀÃˆœ˜ÊœvÊ+!!7Ê«ÀœÍœVœ•ÊÍ…>ÍÊÍ…iÊÃÝˆÍV…ÊÃÖ««œÀÍÃ°Ê 0…iÊ•œÝiÃÍÊÜiÀÃˆœ˜ÊœvÊ+!!7Ê«ÀœÍœVœ•ÊÍ…>ÍÊÍ…iÊÃÝˆÍV…ÊÃÖ««œÀÍÃ° !Ö“LiÀÊœvÊ-0>ÊÃÍ>VŽÃÊÍ…>ÍÊÍ…iÊÃÝˆÍV…Ê…>ÃÊœÀˆ}ˆ˜>Íi`Ê>ÃÊÍ…iÊ-0>#Àˆ}ˆ˜>ÍœÀÊ>˜`Ê «•>Vi`Êˆ˜ÍœÊÃˆ}˜>••ˆ˜}Ê“iÃÃ>}iÃ°ÊÊÊ0…ˆÃÊˆ˜V•Ö`iÃÊÍ…iÊˆ˜ˆÍˆ>•Ê-0>ÊÃÍ>VŽÃÊVœ“«ÖÍi`Ê LßÊÍ…iÊÃÝˆÍV…°Ê7ÍÊ>•ÃœÊˆ˜V•Ö`iÃÊ>˜ßÊ>•ÍiÀ˜>ÍiÊÀœÖÍiÊ-ÃiVœ˜`ÊV…œˆVi]ÊÍ…ˆÀ`ÊV…œˆVi]Ê iÍV°®Ê-0>ÊÃÍ>VŽÃÊVœ“«ÖÍi`ÊLßÊÍ…iÊÃÝˆÍV…Êˆ˜ÊÀiÃ«œ˜ÃiÊÍœÊVÀ>˜ŽL>VŽÃ° !Ö“LiÀÊœvÊVœ˜˜iVÍˆœ˜ÊÃiÍÖ«Ê“iÃÃ>}iÃÊˆ˜V•Ö`ˆ˜}Ê-0>ÊÃÍ>VŽÃÊœÀˆ}ˆ˜>Íi`ÊLßÊÍ…iÊ ÃÝˆÍV…ÊÍ…>ÍÊ…>ÜiÊVÀ>˜Ži`ÊL>VŽÊÍœÊÍ…iÊ>ÍÊ>••Ê•iÜi•ÃÊœvÊÍ…iÊ…ˆiÀ>ÀV…ß° !Ö“LiÀÊœvÊ>•ÍiÀ˜>ÍiÊ-0>ÊÃÍ>VŽÃÊÍ…>ÍÊÍ…iÊÃÝˆÍV…Ê…>ÃÊVœ“«ÖÍi`Ê>˜`Ê«•>Vi`Êˆ˜ÍœÊ Ãˆ}˜>••ˆ˜}Ê“iÃÃ>}iÃÊ>ÃÊÍ…iÊ-0>#Àˆ}ˆ˜>ÍœÀ° !Ö“LiÀÊœvÊÍˆ“iÃÊÍ…iÊÃÝˆÍV…ˆ˜}ÊÃßÃÍi“Êv>ˆ•i`ÊÍœÊVœ“«ÖÍiÊ>ÊÜˆ>L•iÊ-0>ÊÃÍ>VŽÊ>ÃÊ Í…iÊ-0>#Àˆ}ˆ˜>ÍœÀÊvœÀÊÃœ“iÊV>••°Ê7ÍÊˆ˜`ˆV>ÍiÃÊÍ…iÊ˜Ö“LiÀÊœvÊÍˆ“iÃÊ>ÊV>••ÊÝ>ÃÊ V•i>Ài`ÊvÀœ“ÊÍ…ˆÃÊÃÝˆÍV…ˆ˜}ÊÃßÃÍi“Ê`ÖiÊÍœÊœÀˆ}ˆ˜>ÍœÀÊÀœÖÍˆ˜}Êv>ˆ•ÖÀi° !Ö“LiÀÊœvÊÍˆ“iÃÊÍ…iÊÃÝˆÍV…ˆ˜}ÊÃßÃÍi“Êv>ˆ•i`ÊÍœÊVœ“«ÖÍiÊ>ÊÜˆ>L•iÊ-0>ÊÃÍ>VŽÊ>ÃÊ Í…iÊ-0>#Àˆ}ˆ˜>ÍœÀÊLiV>ÖÃiÊÍ…iÊ`iÃÍˆ˜>Íˆœ˜ÊÝ>ÃÊÖ˜Ài>V…>L•iÆÊÍ…>ÍÊˆÃ]ÊÍ…œÃiÊV>••ÃÊ Í…>ÍÊ>ÀiÊV•i>Ài`ÊÝˆÍ…ÊÍ…iÊvœ••œÝˆ˜}Êˆ˜ÊÍ…iÊV>ÖÃiÊˆ˜vœÀ“>Íˆœ˜Êi•i“i˜ÍÊ-7.®\Ê .«iVˆvˆi`Ê0À>˜ÃˆÍÊ!iÍÝœÀŽÊ2˜Ài>V…>L•i]ÊœÀÊ-iÃÍˆ˜>Íˆœ˜Ê2˜Ài>V…>L•i° SmartCell 6A000/ZX-250 Reference Manual 2-143...
Page 168 ================================================================================ Highest Version Lowest Version DTL Count Originator Crankback Count Originator Alternate Route Count Originator Route Fail Count Originator Route Fail Unreachable Originator : 0 switch_prompt # 2-144 SmartCell 6A000/ZX-250 Reference Manual &F’4•az›apm .…œÝÃÊ+!!7ÊÃÍ>ÍˆÃÍˆVÃÊvœÀÊÍ…iÊÃÝˆÍV…° : 1.0 : 1.0 Console Commands...
Page 169: Pnnisummaryaddress
"0 Êi˜`ÊÃßÃÍi“Ê>``ÀiÃÃÊ«ÀivˆÞÊvœÀÊ Í…iÊÃÖ““>Àß° Q+ÀivˆÞ>i˜}Í…R 0…iÊ«ÀivˆÞÊ•i˜}Í…Ê-ˆ˜ÊLˆÍÃ®ÊvœÀÊÍ…iÊ ÃÖ““>Àß°Ê Q.Ö““>Àß0ß«iR "``ÀiÃÃÊÍß«i°Ê Q.Ö««ÀiÃÃR .«iVˆvˆiÃÊÝ…iÍ…iÀÊœÀÊ˜œÍÊÍ…iÊÃÝˆÍV…Ê >`ÜiÀÍˆÃiÃÊÍ…iÊÃÖ““>ÀˆiÃÊÍœÊˆÍÃÊ«iiÀÊ }ÀœÖ«° 3¤›z¤›˜6"•"hF›F• &F’4•az›apm Q!Ö“LiÀR .>“iÊ>ÃÊQ"``ÀiÃÃ!Ö“LiÀRÊˆ˜«ÖÍÊ«>À>“iÍiÀ° Q.Ö““>ÀßÊ+ÀivˆÞR .>“iÊ>ÃÊQ.Ö““>Àß"``ÀiÃÃRÊˆ˜«ÖÍÊ«>À>“iÍiÀ° Q0ß«iR .>“iÊ>ÃÊQ.Ö““>Àß0ß«iRÊˆ˜«ÖÍÊ«>À>“iÍiÀ° Q.Ö««ÀiÃÃR .>“iÊ>ÃÊQ.Ö««ÀiÃÃRÊˆ˜«ÖÍÊ«>À>“iÍiÀ° ="d¤F—)aFd=˜9a«F +œÃˆÍˆÜiÊˆ˜Íi}iÀÊœÀÊ">> 7˜ÍiÀ˜>• .ÞÍiÀˆœÀ 4>•ÃiÊˆvÊÍ…iÊÃÖ““>ÀßÊˆÃÊ>`ÜiÀÍˆÃi`ÆÊ 0ÀÖiÊˆvÊÍ…iÊÃÖ““>ÀßÊˆÃÊ˜œÍÊ>`ÜiÀÍˆÃi`Ê -ˆÃÊÃÖ««ÀiÃÃi`®Ê SmartCell 6A000/ZX-250 Reference Manual 2-145 &FO"¤d› ">> ˜É> ˜É> 7˜ÍiÀ˜>• 4>•Ãi...
Page 170 3zF•"›p• 6"•"hF›F•’˜—˜6F•ha’’apm’ [AddressNumber] <addressnumber> pnnisummaryaddress [AtmAddressPrefix] <atmaddressprefix> [PrefixLength] <prefixlength> [SummaryType] <summarytype> [Suppress] <suppress> "`“ˆ˜ˆÃÍÀ>ÍœÀ delete [AtmAddressPrefix] <atmaddressprefix> pnnisummaryaddress [PrefixLength] <prefixlength> "`“ˆ˜ˆÃÍÀ>ÍœÀ show [AddressNumber] <addressnumber> pnnisummaryaddress "`“ˆ˜ˆÃÍÀ>ÍœÀ 2-146 SmartCell 6A000/ZX-250 Reference Manual Console Commands &F’4•az›apm .iÍÃÊ«>À>“iÍiÀÃÊÍœÊVœ˜vˆ}ÖÀiÊ>Ê«…ßÃˆV>•Ê ˆ˜ÍiÀv>ViÊvœÀÊ+!!7ÊÀœÖÍˆ˜}° -i•iÍiÃÊVœ˜vˆ}ÖÀ>Íˆœ˜ÊvœÀÊ>Ê«…ßÃˆV>•Êˆ˜ÍiÀv>ViÊ vœÀÊ+!!7ÊÀœÖÍˆ˜}° -ˆÃ«•>ßÃÊVÖÀÀi˜ÍÊVœ˜vˆ}ÖÀ>Íˆœ˜ÊÃiÍÍˆ˜}ÃÊvœÀÊ +!!7ÊÀœÖÍˆ˜}°...
Page 171 ================================================================================ Summary Address : 34:00:00:00:00:00:00:00:00:00:00:00:01 Prefix Length : 104 Summary Type : INTERNAL Suppress : FALSE State : ADVERTISING switch_prompt # : 45:00:01 : 24 : 45:00:01 : 24 Type Suppress FALSE FALSE FALSE FALSE SmartCell 6A000/ZX-250 Reference Manual 2-147...
Page 172: Portconfig
Signaling role. Other is used only for autoConfig and pnni10. [InterfaceType] Type of interface advertised by the port. [MaxVpiBits] Maximum VPI bits. [MaxVciBits] Maximum VCI bits. 2-148 SmartCell 6A000/ZX-250 Reference Manual Console Commands Value/Field Size Default A1...A4, B1...B3, C1...C4, D1...D4, ALL DISABLE ENABLE...
Page 173 Maximum VPI bits. Q >ÞÊ7VˆÊLˆÍÃRÊ</d> Maximum VCI bits. Q >ÞÊ.7+Ê7«ˆRÊ</d> Maximum SVC for VPI bits. Q >ÞÊ.7+Ê7VˆRÊ</d> Maximum SVC for VCI bits. Q >ÞÊ7«VÃRÊ</d> Maximum VPCs. Q >ÞÊ7VVÃRÊ</d> Maximum number of VCCs. Value/Field Size Default 4096 SmartCell 6A000/ZX-250 Reference Manual 2-149...
Page 174 [PortNumber] <portnumber> portconfig "•• Examples switch_prompt # modify portconfig PortNumber(A1) PortAdminStatus(up) IlmiAdminStatus(enable) IlmiAddressRegistration(enable) IlmiConnectivity(enable) SigType(pnni10) SigRole(other) InterfaceType(private) MaxVpiBits(0) MaxVciBits(12) MaxSvcVpi(0) MinSvcVci(32) MaxVccs(4096) switch_prompt # 2-150 SmartCell 6A000/ZX-250 Reference Manual &F’4•az›apm .iÍÃÊ«œÀÍÊVœ˜vˆ}ÖÀ>Íˆœ˜° -ˆÃ«•>ßÃÊ«œÀÍÊVœ˜vˆ}ÖÀ>Íˆœ˜° : A1 : disable : 4000 Console Commands...
Page 175 DOWN Trans Type STS-3c Media Type MMF (S) Bandwidth 155 MB switch_prompt # Media Speed Oper Type (MB/s) State 155MB DOWN 155MB DOWN 155MB DOWN 155MB 155MB 155MB : a1 Current autoConfig other private 4096 SmartCell 6A000/ZX-250 Reference Manual 2-151...
Page 176: Portmode
PortMode Use PortMode to control the port framing protocol on the switch when communicating with other switches that use different standards (such as the European SDH type). Operators modify, show Parameters Input Parameter Description [PortNumber] Port number on the switch.
Page 177 # Description Sets the framing mode protocol of the specified port on the local switch to that of any other switch connected to that port. However, changing the port transmission mode from SONET to SDH is not supported. Displays the current framing mode protocol of all ports or a specified port on the switch.
Page 178: Portstat
Port number on the switch. Description Total OAM (operations and maintenance) cells the system received. Total cells dropped when the switch drops cells (includes those dropped when unknown VCs (virtual circuits) and CLP1 (cell loss priority) cells are dropped). Total cells dropped across the system. (includes those dropped when unknown VCs (virtual circuits) and CLP1 (cell loss priority) cells are dropped).
Page 179 Unk VC CLP1 Total Dropped Dropped Dropped 13839 13839 SmartCell 6A000/ZX-250 Reference Manual 2-155 (detail) to show portstat /d...
Page 180 CLP1 Cells Dropped Total Cells Dropped Port B3 Statistics ============================================================================ OAM Cells Received RM Cells Received CLP1 Cells Received Unknown VC Cells Dropped CLP1 Cells Dropped Total Cells Dropped 2-156 SmartCell 6A000/ZX-250 Reference Manual : 13851 : 13851 Console Commands...
Page 181 Console Commands Port B4(CPU) Statistics ============================================================================ OAM Cells Received RM Cells Received CLP1 Cells Received Unknown VC Cells Dropped CLP1 Cells Dropped Total Cells Dropped switch_prompt # : 16777215 : 16777215 SmartCell 6A000/ZX-250 Reference Manual 2-157...
Page 182: Porttrafficcongestion
Descriptions Operator Parameters/Permissions modify [PortNumber] <portnumber> porttrafficcongestion [Queue#Min/MaxCellCounter] <queue#min/maxcellcounter> Administrator 2-158 SmartCell 6A000/ZX-250 Reference Manual Console Commands Value/Field Size Default ALL, A1...A4, B1...B3, C1...C4, D1...D4 0-8192 20 (Min.) 8192 (Max.) Description Modifies the traffic congestion settings for a specified port or all ports.
Page 183 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 SmartCell 6A000/ZX-250 Reference Manual 2-159...
Page 184 PortNumber(ALL) Port ID Queue 1 Queue 2 ============================================================================ 4096 4096 4096 4096 4096 4096 4096 B4(CPU) 4096 switch_prompt # 2-160 SmartCell 6A000/ZX-250 Reference Manual Queue 3 Queue 4 4096 4096 4096 4096 4096 4096 4096 4096 4096 4096 4096 4096...
Page 185: Privilege
Read-Only privilege status and then issue this command, the switch prompts you for the Administrator [Password] before allowing access to Administrator commands. Lowers the privilege level from Administrator to Read Only. No password is required. SmartCell 6A000/ZX-250 Reference Manual 2-161 Default...
Page 186 Console Commands Examples switch_prompt # show privilege The current user is Administrator switch_prompt # switch_prompt # enable password: ******** switch_prompt # disable The current user is ReadOnly switch_prompt # 2-162 SmartCell 6A000/ZX-250 Reference Manual...
Page 187: Prompt
Console Commands Prompt Use Prompt to control how the switch prompt is displayed on the console monitor. Operator modify Parameter Input Parameter Description [Prompt] New prompt name. Description Operator Parameters/Permissions modify [Prompt] <newpromptname> prompt Administrator Example switch_prompt # set prompt...
Page 188: Pvc
+œÀÍÊÀiViˆÜˆ˜}ÊÍ…iÊL>VŽÝ>À`Êv•œÝÊœvÊÍ…iÊ …ˆ}…É•œÝÊ«>ˆÀ° Q>œÝÊ7+7R >œÝÊ7+7Ê-ÜˆÀÍÖ>•Ê«>Í…Êˆ`i˜ÍˆvˆiÀ®Ê ˜Ö“LiÀ°Ê Q>œÝ7+7R >œÝÊ7+7Ê-ÜˆÀÍÖ>•ÊVˆÀVÖˆÍÊˆ`i˜ÍˆvˆiÀ®Ê ˜Ö“LiÀ° Q6ˆ}…+œÀÍR 7ÍÊˆÃÊÍ…iÊ«œÀÍÊÀiViˆÜˆ˜}ÊÍ…iÊvœÀÝ>À`ÊÍÀ>vvˆVÊ v•œÝÊœvÊÍ…iÊ…ˆ}…É•œÝÊ«>ˆÀ°Ê Q6ˆ}…7+7R >œÝÊ7+7Ê-ÜˆÀÍÖ>•Ê«>Í…Êˆ`i˜ÍˆvˆiÀ®Ê ˜Ö“LiÀ°Ê Q6ˆ}…7+7R >œÝÊ7+7Ê-ÜˆÀÍÖ>•ÊVˆÀVÖˆÍÊˆ`i˜ÍˆvˆiÀ®Ê ˜Ö“LiÀ° 2-164 SmartCell 6A000/ZX-250 Reference Manual Console Commands ="d¤F—)aFd=˜9a«F &FO"¤d› "£°°°"{]Ê*£°°°*Ï]Ê+£°°°+{]Ê ">>ÊvœÀÊÍ…iÊ -£°°°-{]Ê">> Ã…œÝÊ«ÜVÊ Vœ““>˜`° ">> ">> + +Ê-«œˆ˜ÍÊÍœÊ“Ö•Íˆ«œˆ˜Í®Ê +0+Ê-«œˆ˜ÍÊÍœÊ«œˆ˜Í® "£°°°"{]Ê*£°°°*Ï]Ê+£°°°+{]Ê !#!. -£°°°-{]Ê">> ˜É>...
Page 189 3¤›z¤›˜6"•"hF›F• Q0À>vvˆVÊ0ß«iR Q"`“ˆ˜Ê.Í>ÍÖÃR Q6ˆ}…Ê0À>vvˆVÊ-iVÃÊ7˜`iÞÊ-09®RÊ</d> Q6ˆ}…Ê0À>vvˆVÊ-iVÃÊ7˜`iÞÊ--9®RÊ</d> Q>œÝÊ0À>vvˆVÊ-iVÃÊ7˜`iÞÊ-09®RÊ</d> Q>œÝÊ0À>vvˆVÊ-iVÃÊ7˜`iÞÊ--9®RÊ</d> Q>œÝÊ0œÊ6ˆ}…Ê#«iÀ>Íˆœ˜Ê.Í>ÍÖÃRÊ</d> Q6ˆ}…Ê0œÊ>œÝÊ#«iÀ>Íˆœ˜Ê.Í>ÍÖÃRÊ</d> Q+œÀÍÊ.Í>ÍÖÃRÊ</d> Q+Ài>Íˆœ˜Ê0ˆ“iRÊ</d> Q.>À•ßÊ+>VŽiÍÊ-ˆÃV>À`RÊ</d> Q6ˆ}…Ê+œÀÍRÊ</d> ="d¤F—)aFd=˜9a«F &F’4•az›apm 0ß«iÊœvÊÍ…iÊÍÀ>vvˆV\ÊÊ+*-]Ê-07*-]Ê!-07*-]Ê2*-]ÊœÀÊ "*-° "`“ˆ˜ˆÃÍÀ>ÍˆÜiÊÃÍ>ÍÖÃ°Ê 7˜`iÞÊœvÊ…ˆ}…ÊÍÀ>vvˆVÊ`iÃVÀˆ«ÍœÀÊÍÀ>˜Ã“ˆÍÊÃˆ`i° 7˜`iÞÊœvÊ…ˆ}…ÊÍÀ>vvˆVÊ`iÃVÀˆ«ÍœÀÊÀiViˆÜiÊÃˆ`iÊ 7˜`iÞÊœvÊ•œÝÊÍÀ>vvˆVÊ`iÃVÀˆ«ÍœÀÊÍÀ>˜Ã“ˆÍÊÃˆ`iÊ 7˜`iÞÊœvÊ•œÝÊÍÀ>vvˆVÊ`iÃVÀˆ«ÍœÀÊÀiViˆÜiÊÃˆ`i° #«iÀ>Íˆœ˜>•ÊÃÍ>ÍÖÃÊœvÊ•œÝ†Íœ†…ˆ}…Ê-vœÀÝ>À`®ÊVœ˜˜iVÍˆœ˜°Ê #«iÀ>Íˆœ˜>•ÊÃÍ>ÍÖÃÊœvÊ…ˆ}…†Íœ†•œÝÊ-L>VŽÝ>À`®Ê Vœ˜˜iVÍˆœ˜° #«iÀ>Íˆœ˜>•ÊÃÍ>ÍÖÃÊœvÊ«œÀÍ°Ê 0ˆ“iÊÍ…iÊ+7+ÊÝ>ÃÊVÀi>Íi`Ê-Ài•>ÍˆÜiÊÍœÊÍ…iÊÃÝˆÍV…ÊLœœÍÊ Íˆ“i®°Ê .>À•ßÊ«>VŽiÍÊ`ˆÃV>À`ÊvœÀÊÍ…iÊVÀœÃÃÊVœ˜˜iVÍÊ>ÃÊV>•VÖ•>Íi`ÊLßÊ +"+°Ê +œÀÍÊÀiViˆÜˆ˜}ÊÍ…iÊvœÀÝ>À`ÊÍÀ>vvˆVÊv•œÝÊœvÊÍ…iÊ…ˆ}…É•œÝÊ «>ˆÀ° SmartCell 6A000/ZX-250 Reference Manual 2-165 &FO"¤d› ˜É> ˜É>...
Page 190 Q!Ö“LiÀÊœvÊ+i••ÃÊ-Àœ««i`Êˆ˜Ê*ŽÝÊ-ˆÀiVÍˆœ˜RÊ</d> Q!Ö“LiÀÊœvÊ.«`Ê+>VŽiÍÃÊ-Àœ««i`Êˆ˜Ê4Ý`Ê-ˆÀiVÍˆœ˜RÊ</d> Q!Ö“LiÀÊœvÊ.«`Ê+>VŽiÍÃÊ-Àœ««i`ÊÊˆ˜Ê*ŽÝÊ-ˆÀiVÍˆœ˜RÊ</d> !Ö“LiÀÊœvÊi>À•ßÊ«>VŽiÍÊ`ˆÃV>À`Ê«>VŽiÍÃÊ`Àœ««i`Êˆ˜ÊÍ…iÊ Descriptions 3zF•"›p• 6"•"hF›F•’˜—˜6F•ha’’apm’ activate pvc [LowPortID] <lowportid> [LowVPI] <lowvpi> [LowVCI] <lowvci> [HighPortID] <highportid> [LowVPI] <lowvpi> [HighVCI] <highvci> "`“ˆ˜ˆÃÍÀ>ÍœÀ 2-166 SmartCell 6A000/ZX-250 Reference Manual &F’4•az›apm +i••Ê•œÃÃÊÀ>ÍˆœÊœ˜ÊÍ…ˆÃÊ7+° +Ö“Ö•>ÍˆÜiÊVi••Ê`i•>ßÊÜ>Àˆ>Íˆœ˜Êœ˜ÊÍ…ˆÃÊ7+° >Þˆ“Ö“ÊVi••ÊÍÀ>˜ÃviÀÊ`i•>ßÊœ˜ÊÍ…ˆÃÊ7+° +Ö“Ö•>ÍˆÜiÊVi••ÊÍÀ>˜ÃviÀÊ`i•>ßÊœ˜ÊÍ…ˆÃÊ7+° !Ö“LiÀÊœvÊVi••ÃÊÀiViˆÜi`Êˆ˜ÊÍ…iÊvœÀÝ>À`Ê`ˆÀiVÍˆœ˜° !Ö“LiÀÊœvÊVi••ÃÊÀiViˆÜi`Êˆ˜ÊÍ…iÊL>VŽÝ>À`Ê`ˆÀiVÍˆœ˜° !Ö“LiÀÊœvÊVi••ÃÊ`Àœ««i`Êˆ˜ÊÍ…iÊvœÀÝ>À`Ê`ˆÀiVÍˆœ˜° !Ö“LiÀÊœvÊVi••ÃÊ`Àœ««i`Êˆ˜ÊÍ…iÊL>VŽÝ>À`Ê`ˆÀiVÍˆœ˜° !Ö“LiÀÊœvÊi>À•ßÊ«>VŽiÍÊ`ˆÃV>À`Ê«>VŽiÍÃÊ`Àœ««i`Êˆ˜ÊÍ…iÊ vœÀÝ>À`Ê`ˆÀiVÍˆœ˜° L>VŽÝ>À`Ê`ˆÀiVÍˆœ˜° &F’4•az›apm "VÍˆÜ>ÍiÃÊÍ…iÊ+7+ÊÃ«iVˆvˆi`°Ê"`“ˆ˜ÊÃÍ>ÍÖÃÊˆÃÊÃiÍÊÍœÊ...
Page 191 [LowVPI] <lowvpi> [HighVCI] <highvci> "`“ˆ˜ˆÃÍÀ>ÍœÀ delete pvc [LowPortID] <lowportid> [LowVPI] <lowvpi> [LowVCI] <lowvci> [HighPortID] <highportid> [LowVPI] <lowvpi> [HighVCI] <highvci> "`“ˆ˜ˆÃÍÀ>ÍœÀ show pvc [LowPortID] <lowportid> [CrossConnectID] <crossconnectid> [CrossConnectSubID] <crossconnectsubid> "`“ˆ˜ˆÃÍÀ>ÍœÀ &F’4•az›apm "``ÃÊÍ…iÊÃ«iVˆvˆi`Ê+7+° -i>VÀˆÜ>ÍiÃÊÍ…iÊÃ«iVˆvˆi`Ê+7+°Ê"`“ˆ˜ÊÃÍ>ÍÖÃÊˆÃÊÃiÍÊ ÍœÊ-#8!° -i•iÍiÃÊÍ…iÊÃ«iVˆvˆi`Ê+7+° -ˆÃ«•>ßÃÊÍ…iÊÃ«iVˆvˆi`Ê+7+° SmartCell 6A000/ZX-250 Reference Manual 2-167...
Page 192 PortID(ALL) CrossConnectId(ALL) CrossConnectSubId(ALL) =================================================================================== Conn Conn Traffic Conn SubId Type Type =================================================================================== switch_prompt # 2-168 SmartCell 6A000/ZX-250 Reference Manual : PTP : a2 : 33 : a3 : 34 Port | Port Console Commands High Admin VPI VCI Status DOWN...
Page 194 # deactivate pvc LowPortID() LowVPI() LowVCI() HighPortID() HighVPI() HighVCI() switch_prompt # 2-170 SmartCell 6A000/ZX-250 Reference Manual : A1 : 33 : a2 : 34 Console Commands...
Page 195: Pvcbyid
7-ÃÊ>˜`ÊVÀœÃÃ†Vœ˜˜iVÍÊÃÖLÊ7-Ã° Q+ÀœÃÃ+œ˜˜iVÍ.ÖL7`R +ÀœÃÃ†Vœ˜˜iVÍÊÃÖLÊˆ`i˜ÍˆvˆiÀÊœvÊÍ…iÊ+7+° Descriptions 3zF•"›p• 6"•"hF›F•’˜—˜6F•ha’’apm’ activate [CrossConnectId] <crossconnid> pvcbyid [CrossConnectSubId] <crossconnectsubid> "`“ˆ˜ˆÃÍÀ>ÍœÀ deactivate [CrossConnectId] <crossconnid> pvcbyid [CrossConnectSubId] <crossconnectsubid> "`“ˆ˜ˆÃÍÀ>ÍœÀ delete [CrossConnectId] <crossconnid> pvcbyid [CrossConnectSubId] <crossconnectsubid> "`“ˆ˜ˆÃÍÀ>ÍœÀ ="d¤F—)aFd=˜9a«F &FO"¤d› ˜É> ˜É> &F’4•az›apm "VÍˆÜ>ÍiÃÊÍ…iÊ+7+°Ê"`“ˆ˜ÊÃÍ>ÍÖÃÊˆÃÊ2+° -i>VÍˆÜ>ÍiÃÊÍ…iÊ+7+°Ê"`“ˆ˜ÊÃÍ>ÍÖÃÊˆÃÊ-#8!° -i•iÍiÃÊÍ…iÊ+7+°Ê SmartCell 6A000/ZX-250 Reference Manual 2-171...
Page 197: Reboot
Console Commands Reboot Use Reboot to reboot the switch. Enter Reboot with caution as it is instantly entered without offering the chance to confirm your decision. Operator reboot Parameters This command has no parameters. Just type reboot at the switch prompt and the switch reboots. You should be aware that there is no confirm option.
Page 198 Console task ID : 0xe04c4cb0 SmartSwitch Command Console SmartSwitch Version 02.01(31) (c) Cabletron Systems Inc. password: The current user is switch_prompt # 2-174 SmartCell 6A000/ZX-250 Reference Manual CPU Speed: 33 MHZ. 8 MB. 32 MB. 8 MB. (1) UP (2) UP...
Page 199: Route
[Use] Number of times this route has been used to send a packet. [Interface] Interface used for forwarding packets on this route. Value/Field Size Default dot decimal/ NONE 7-15 characters dot decimal/ NONE 7-15 characters SmartCell 6A000/ZX-250 Reference Manual 2-175...
Page 200 # delete route DestNetIP() GatewayIP() switch_prompt # 2-176 SmartCell 6A000/ZX-250 Reference Manual Description Creates an IP route to an ATM client when it is not directly connected to the NMS (network management system). You must assign both the destination IP address and the gateway IP address to reach the ATM client, and these addresses must already exist.
Page 201: Rows
0 to 999 Description Sets the number of rows per page on the console display, by telling the switch how many lines your console supports. If you do not want screen breaks in the output, set the number of rows to "0".
Page 202: Sarstat
Use SARStat (segmentation and reassembly statistics) to view statistics from the SAR on the CPU port. This is useful for debugging hardware problems. Operator show Parameters This command has no input parameters. Just type show sarstat at the switch prompt. Output Parameter Description [Rcv Pkts] Number of packets received since last up-time or clear.
Page 203 Number of packets dropped. Description Operator Parameters/Permissions Administrator show sarstat Description Displays all levels of statistics for the SAR. AAL (ATM adaptation layer) commands act on the SAR of VCs (virtual circuits) and VC statistics. SmartCell 6A000/ZX-250 Reference Manual 2-179...
Page 204 Int: 0 PI Int: Transmit Statistics Pkts Qd : 20 Pkts Cmp: switch_prompt # 2-180 SmartCell 6A000/ZX-250 Reference Manual 648 Raw Cell: 0 Buf UF 0 Len Err : 0 Crc Err : 0 Chnl DVT: 26 spur Int: 39 RQU...
Page 205: Serviceregistry
[AtmAddress] <atmaddress> "`“ˆ˜ˆÃÍÀ>ÍœÀ delete serviceregistry [PortNumber] <portnumber> [ServiceType] <servicetype> [AddressIndex] <addressindex> "`“ˆ˜ˆÃÍÀ>ÍœÀ show serviceregistry [PortNumber] <portnumber> "`“ˆ˜ˆÃÍÀ>ÍœÀ ="d¤F—)aFd=˜9a«F &FO"¤d› "£°°°"{]Ê*£°°°*Ï]Ê+£°°°+{]Ê ">> -£°°°-{]Ê">> "!. >.+. >.+. +œÃˆÍˆÜiÊˆ˜Íi}iÀ ˜É> ˜É> &F’4•az›apm "``ÃÊ>ÊÃiÀÜˆViÊÍœÊÃiÀÜˆViÊÀi}ˆÃÍÀßÊ 7*° -i•iÍiÃÊ>ÊÃiÀÜˆViÊvÀœ“ÊÃiÀÜˆViÊÀi}ˆÃÍÀßÊ 7*° -ˆÃ«•>ßÃÊ>••Êi˜ÍÀˆiÃÊˆ˜ÊÍ…iÊÃiÀÜˆViÊÀi}ˆÃÍÀßÊ 7*° SmartCell 6A000/ZX-250 Reference Manual 2-181...
Page 206 AddressIndex() AtmAddress() : 39:00:00:00:00:00:00:00:00:00:14:1B:00:0020:D4:14:1C:00:01 switch_prompt # switch_prompt # delete serviceregistry PortNumber(ALL) ServiceType(LECS) AddressIndex() switch_prompt # switch_prompt # show serviceregistry PortNumber(ALL) Port Type Index AtmAddress =============================================================================== LECS 39:00:00:00:00:00:00:00:00:00:14:1B:00:0020:D4:14:1C:00:01 LECS 39:00:00:00:00:00:00:00:00:00:14:1B:00:0020:D4:14:1A:00:01 LECS 39:00:00:00:00:00:00:00:00:00:14:1B:00:0020:D4:14:1B:00:01 switch_prompt # 2-182 SmartCell 6A000/ZX-250 Reference Manual Console Commands...
Page 207: Shutdown
Console Commands Shutdown Use Shutdown to shut down the switch to a state where it can be powered off. It stops all logging and synchronizes the file system. This must be run before turning off the switch. Operator shutdown Parameters This command has no parameters.
Page 208: Sigstatistics
+œÀÍÊ˜Ö“LiÀÊœ˜ÊÍ…iÊÃÝˆÍV…° 3¤›z¤›˜6"•"hF›F• &F’4•az›apm Q-iÍiVÍÊ.iÍÖ«Ê"ÍÍi“«ÍÃR !Ö“LiÀÊœvÊÃiÍ†Ö«Ê“iÃÃ>}iÃÊÀiViˆÜi`° Q.“ˆÍÊ.iÍÖ«Ê"ÍÍi“«ÍÃR !Ö“LiÀÊœvÊÃiÍ†Ö«Ê“iÃÃ>}iÃÊÍÀ>˜Ã“ˆÍÍi`° Q-iÍiVÍÊ2˜>Ü>ˆ•>L•iÊ-œÖÍiÃR !Ö“LiÀÊœvÊ.7+ÊV>••ÃÊÀi•iVÍi`ÊLßÊÍ…ˆÃÊÃÝˆÍV…ÊLiV>ÖÃiÊœvÊÖ˜>Ü>ˆ•>L•iÊ77.+ÊœÀÊ2!7Ê ÀœÖÍiÃÊ}i˜iÀ>Íi`Êœ˜ÊœÍ…iÀÊÃÝˆÍV…iÃ° Q.“ˆÍÊ2˜>Ü>ˆ•>L•iÊ-œÖÍiÃR !Ö“LiÀÊœvÊ.7+ÊV>••ÃÊÀi•iVÍi`ÊLßÊÍ…ˆÃÊÃÝˆÍV…ÊLiV>ÖÃiÊœvÊÖ˜>Ü>ˆ•>L•iÊ77.+ÊœÀÊ2!7Ê ÀœÖÍiÃÊ}i˜iÀ>Íi`Êœ˜ÊÍ…ˆÃÊÃÝˆÍV…° Q-iÍiVÍÊ2˜>Ü>ˆ•>L•iÊ-iÃœÖÀViÃR !Ö“LiÀÊœvÊV>••ÃÊÀi•iVÍi`ÊLiV>ÖÃiÊœvÊÖ˜>Ü>ˆ•>L•iÊÀiÃœÖÀViÃÊœ˜ÊœÍ…iÀÊÃÝˆÍV…iÃ° Q.“ˆÍÊ2˜>Ü>ˆ•>L•iÊ-iÃœÖÀViÃR !Ö“LiÀÊœvÊV>••ÃÊÀi•iVÍi`ÊLiV>ÖÃiÊœvÊÖ˜>Ü>ˆ•>L•iÊÀiÃœÖÀViÃÊœ˜ÊÍ…ˆÃÊÃÝˆÍV…° Q-iÍiVÍÊ+>••i`Ê+>ÀÍßÊ.Üi˜ÍÃR !Ö“LiÀÊœvÊV>••ÃÊœÍ…iÀÊÃÝˆÍV…iÃÊÀi•iVÍÊ-ÃÖV…Ê>ÃÊˆ˜VœÀÀiVÍÊœÀÊˆ˜Ü>•ˆ`ÊV>••i`Ê«>ÀÍßÊ ˜Ö“LiÀÊœÀÊV>••i`Ê«>ÀÍßÊLÖÃßÊÃˆ}˜>•®° Q.“ˆÍÊ+>••i`Ê+>ÀÍßÊ.Üi˜ÍÃR !Ö“LiÀÊœvÊV>••ÃÊÍ…ˆÃÊÃÝˆÍV…ÊÀi•iVÍi`Ê-ÃÖV…Ê>ÃÊˆ˜VœÀÀiVÍÊœÀÊˆ˜Ü>•ˆ`ÊV>••i`Ê«>ÀÍßÊ ˜Ö“LiÀÊœÀÊV>••i`Ê«>ÀÍßÊLÖÃßÊÃˆ}˜>•®° Q-iÍiVÍÊ.ˆ}˜>•ˆ˜}Ê iÃÃ>}iÊ !Ö“LiÀÊœvÊÃˆ}˜>•ˆ˜}Ê“iÃÃ>}iÊiÀÀœÀÃÊvœÀÊœÍ…iÀÊÃÝˆÍV…iÃÊ-ÃÖV…Ê>ÃÊˆ˜Ü>•ˆ`Êˆ˜vœÀ“>Íˆœ˜Ê .ÀÀœÀÃR i•i“i˜ÍÃÊ-7.®ÊœÀÊ“ˆÃÃˆ˜}Ê“>˜`>ÍœÀßÊi•i“i˜ÍÃÊˆ˜ÊÍ…iÊ7.Ã®° 2-184 SmartCell 6A000/ZX-250 Reference Manual ="d¤F—)aFd=˜9a«F &FO"¤d› "£°°°"{]Ê*£°°°*Ï]Ê+£°°°+{]Ê ">> -£°°°-{]Ê">> Console Commands...
Page 209 Console Commands 3¤›z¤›˜6"•"hF›F• &F’4•az›apm Q.“ˆÍÊ.ˆ}˜>•ˆ˜}Ê iÃÃ>}iÊ.ÀÀœÀÃR !Ö“LiÀÊœvÊÃˆ}˜>•ˆ˜}Ê“iÃÃ>}iÊiÀÀœÀÃÊvœÀÊÍ…ˆÃÊÃÝˆÍV…Ê-ÃÖV…Ê>ÃÊˆ˜Ü>•ˆ`Êˆ˜vœÀ“>Íˆœ˜Ê i•i“i˜ÍÃÊ-7.®ÊœÀÊ“ˆÃÃˆ˜}Ê“>˜`>ÍœÀßÊi•i“i˜ÍÃÊˆ˜ÊÍ…iÊ7.Ã®° Q-iÍiVÍÊ0ˆ“iÀÊ.Þ«ˆÀ>Íˆœ˜ÃR !Ö“LiÀÊœvÊV>••ÃÊÍiÀ“ˆ˜>Íi`ÊLßÊœÍ…iÀÊÃÝˆÍV…iÃÊ`ÖiÊÍœÊÍˆ“iÀÊiÞ«ˆÀ>Íˆœ˜Ã° Q.“ˆÍÊ0ˆ“iÀÊ.Þ«ˆÀ>Íˆœ˜ÃR !Ö“LiÀÊœvÊV>••ÃÊÍiÀ“ˆ˜>Íi`ÊLßÊÍ…ˆÃÊÃÝˆÍV…Ê`ÖiÊÍœÊÍˆ“iÀÊiÞ«ˆÀ>Íˆœ˜Ã° Q-iÍiVÍÊ-iÃÍ>ÀÍÃR !Ö“LiÀÊœvÊÀiµÖiÃÍÃÊ-LßÊÍ…iÊÖÃiÀ®Êœ˜ÊœÍ…iÀÊÃÝˆÍV…iÃÊÍœÊÀi•i>ÃiÊ>••ÊÀiÃœÖÀViÃÊ>ÃÃœVˆ>Íi`Ê ÝˆÍ…ÊÍ…iÊVˆÀVÖˆÍÊVœ˜ÍÀœ••i`ÊLßÊÃˆ}˜>•ˆ˜}° Q.“ˆÍÊ-iÃÍ>ÀÍÃR !Ö“LiÀÊœvÊÀiµÖiÃÍÃÊ-LßÊÍ…iÊÖÃiÀ®Êœ˜ÊÍ…ˆÃÊÃÝˆÍV…ÊÍœÊÀi•i>ÃiÊ>••ÊÀiÃœÖÀViÃÊ>ÃÃœVˆ>Íi`ÊÝˆÍ…Ê Í…iÊVˆÀVÖˆÍÊVœ˜ÍÀœ••i`ÊLßÊÃˆ}˜>•ˆ˜}° Q7˜Ê+>••Ê.ÃÍ>L•ˆÃ…“i˜ÍÃR !Ö“LiÀÊœvÊÃÖVViÃÃvÖ•Êˆ˜Vœ“ˆ˜}ÊV>••ÊÃiÍ†Ö«Ã° Q#ÖÍÊ+>••Ê.ÃÍ>L•ˆÃ…“i˜ÍÃR !Ö“LiÀÊœvÊÃÖVViÃÃvÖ•ÊœÖÍ}œˆ˜}ÊV>••ÊÃiÍ†Ö«Ã° Description 3zF•"›p• 6"•"hF›F•’˜—˜6F•ha’’apm’ show [PortNumber] sigstatistics "•• &F’4•az›apm -ˆÃ«•>ßÃÊÃˆ}˜>•ˆ˜}ÊÃÍ>ÍˆÃÍˆVÃ° <portnumber> SmartCell 6A000/ZX-250 Reference Manual 2-185...
Page 210 Detect Signalling Message Errors Emitt Signalling Message Errors Detect Callingparty Events Emitt Callingparty Events Detect Timer Expirations Emitt Timer Expirations Detect Restarts Emitt Restarts In Call Establishments Out Call Establishments switch_prompt # 2-186 SmartCell 6A000/ZX-250 Reference Manual : a1 Console Commands...
Page 211: Sigtimer
…>ÃÊÍœÊLiÊÀiÃÍ>ÀÍi`° Descriptions 3zF•"›p• 6"•"hF›F•’˜—˜6F•ha’’apm’ modify [PortNumber] <portnumber> sigtimer [TimerID] <timerid> [Interval] <interval> [Retries] <retries> "`“ˆ˜ˆÃÍÀ>ÍœÀ "•• show sigtimer ="d¤F—)aFd=˜9a«F &FO"¤d› ">>]Ê"£°°°"{]Ê*£°°°*{]Ê "£ +£°°°+{]Ê-£°°°-{ +œÃÃˆL•iÊÜ>•ÖiÃÊ>Ài\Ê 0ÏäÏ 0Ïä£]0ÏäÏ]Ê0ÏäÈ]0Ïän]Ê 0Ïä™]Ê0Ï£ä]Ê0Ï£Ï]Ê0Ï£È]Ê 0Ï£Ç]Ê0ÏÔÔ]Ê0ÏÏ£]Ê0ÏÏÏ]Ê 0Ï™Ç]0Ï™n]Ê0Ï™™° ä =iÀœÊœÀÊ«œÃˆÍˆÜiÊˆ˜Íi}iÀ £ &F’4•az›apm .iÍÃÊÃˆ}˜>•ˆ˜}ÊÍˆ“iÀÊÜ>•ÖiÃ° -ˆÃ«•>ßÃÊÃˆ}˜>•ˆ˜}ÊÍˆ“iÀÊÜ>•ÖiÃ° SmartCell 6A000/ZX-250 Reference Manual 2-187...
Page 212 T317 duration : 60000 T322 duration : 4000 T322 retries T331 duration : 60000 T331 retries T333 duration : 10000 T397 duration : 180000 T398 duration : 4000 T399 duration : 14000 switch_prompt # 2-188 SmartCell 6A000/ZX-250 Reference Manual Console Commands...
Page 213: Sscopconfig
-ˆ˜Ê“ˆ••ˆÃiVœ˜`Ã®Êˆ˜ÊÍ…iÊ >LÃi˜ViÊœvÊ.-Ê+-2ÊÍÀ>vvˆV° Q!œ-iÃ«œ˜Ãi0ˆ“iR >Þˆ“Ö“ÊÍˆ“iÊ-ˆ˜Ê “ˆ••ˆÃiVœ˜`Ã®ÊÝˆÍ…ˆ˜ÊÝ…ˆV…Ê >Ê+œ••Ê“ÖÃÍÊLiÊ >VŽ˜œÝ•i`}i`ÊLßÊ>Ê.Í>ÍÊ +-2°Ê Q++0ˆ“iR ->ÍiÊ>ÍÊÝ…ˆV…Ê*.57!Ê>˜`Ê .!-Ê+-2ÃÊ>ÀiÊ}i˜iÀ>Íi`Ê `ÖÀˆ˜}Ê•ˆ˜ŽÊiÃÍ>L•ˆÃ…“i˜ÍÊœvÊ Ài•i>Ãi° Q-Þ8ˆ˜`œÝ.ãR -iViˆÜiÊÝˆ˜`œÝÊÃˆãiÊÝ…i˜Ê ..+#+ÊÃÍ>VŽÊˆÃÊˆ˜ˆÍˆ>•ˆãi`°Ê ="d¤F—)aFd=˜9a«F &FO"¤d› ">>]Ê"£°°°"{]Ê*£°°°*Ï]Ê "£ÊvœÀÊ“œ`ˆvßÊœ«iÀ>ÍœÀ]Ê +£°°°+{]Ê-£°°°-{]Ê">> ">>ÊvœÀÊÃ…œÝÊœ«iÀ>ÍœÀ x†Ôä Ôä {†£ä £ää†£äää Çxä £äää†Ôäää Ôäää £ääää†£xäää Çäää £äää†Ôäää £äää ÏÔ†ÔxÈ È{ SmartCell 6A000/ZX-250 Reference Manual 2-189...
Page 214 # show sscopconfig Executing this command : show SSCOPConfig PortNumber(ALL) : a1 Port# MaxPD MaxCC PollTm =================================================================== (Timer value in MilliSecs) =================================================================== switch_prompt # 2-190 SmartCell 6A000/ZX-250 Reference Manual &F’4•az›apm .iÍÃÊÃÝˆÍV…Ê..+#+Ê«>À>“iÍiÀÃ° -ˆÃ«•>ßÃÊÃÝˆÍV…Ê..+#+Ê«>À>“iÍiÀÃ° KpAliveTm NoRespTm CCTm RxWindowSz 2000 7000 1000 Console Commands...
Page 215: Sscopstatistics
,mz¤›˜6"•"hF›F• &F’4•az›apm Q+œÀÍ!Ö“LiÀR +œÀÍÊ˜Ö“LiÀÊœ˜ÊÍ…iÊÃÝˆÍV…° 3¤›z¤›˜6"•"hF›F• Q!Ö“Ê*.57!Ê0À>˜Ã“ˆÍÍi`R Q!Ö“Ê*.57!Ê-iViˆÜi`R Q!Ö“Ê*.57!Ê-iÍÀ>˜Ã“ˆÍÊ0À>˜Ã“ˆÍÍi`R Q!Ö“Ê*.57!Ê-iÍÀ>˜Ã“ˆÍÊ-iViˆÜi`R Q!Ö“Ê*.57!Ê"+=Ê0À>˜Ã“ˆÍÍi`RÊ Q!Ö“Ê*.57!Ê"+=Ê-iViˆÜi`RÊ Q!Ö“Ê*.57!Ê-.<Ê0À>˜Ã“ˆÍÍi`R Q!Ö“Ê*.57!Ê-.<Ê-iViˆÜi`R Q!Ö“Ê-..:!+Ê0À>˜Ã“ˆÍÍi`R Q!Ö“Ê-..:!+Ê-iViˆÜi`R Q!Ö“Ê-..:!+Ê-iÍÀ>˜Ã“ˆÍÊ0À>˜Ã“ˆÍÍi`R Q!Ö“Ê-..:!+Ê-iÍÀ>˜Ã“ˆÍÊ-iViˆÜi`R ="d¤F—)aFd=˜9a«F &FO"¤d› "£°°°"{]Ê*£°°°*Ï]Ê+£°°°+{]Ê ">> -£°°°-{]Ê">> &F’4•az›apm !Ö“LiÀÊœvÊ*.57!Ê+-2ÃÊÍÀ>˜Ã“ˆÍÍi`° !Ö“LiÀÊœvÊ*.57!Ê+-2ÃÊÀiViˆÜi`° !Ö“LiÀÊœvÊ*.57!ÊÀiÍÀ>˜Ã“ˆÍÊ+-2ÃÊÍÀ>˜Ã“ˆÍÍi`° !Ö“LiÀÊœvÊ*.57!ÊÀiÍÀ>˜Ã“ˆÍÊ+-2ÃÊÀiViˆÜi`° !Ö“LiÀÊœvÊ*.57!"+=Ê+-2ÃÊÍÀ>˜Ã“ˆÍÍi`°Ê !Ö“LiÀÊœvÊ*.57!"+=Ê+-2ÃÊÀiViˆÜi`° !Ö“LiÀÊœvÊ*.57!-.<.+0Ê+-2ÃÊÍÀ>˜Ã“ˆÍÍi`° !Ö“LiÀÊœvÊ*.57!-.<.+0Ê+-2ÃÊÀiViˆÜi`°Ê !Ö“LiÀÊœvÊ-..:!+Ê+-2ÃÊÍÀ>˜Ã“ˆÍÍi`°Ê !Ö“LiÀÊœvÊ-..:!+Ê+-2ÃÊÀiViˆÜi`°Ê !Ö“LiÀÊœvÊ-..:!+ÊÀiÍÀ>˜Ã“ˆÍÊ+-2ÃÊÍÀ>˜Ã“ˆÍÍi`°Ê !Ö“LiÀÊœvÊ-..:!+ÊÀiÍÀ>˜Ã“ˆÍÊ+-2ÃÊÀiViˆÜi`°Ê SmartCell 6A000/ZX-250 Reference Manual 2-191...
Page 216 Q!Ö“Ê.---.+Ê-iÍÀ>˜Ã“ˆÍÊ0À>˜Ã“ˆÍÍi`R Q!Ö“Ê.---.+Ê-iÍÀ>˜Ã“ˆÍÊ-iViˆÜi`R Q!Ö“Ê.---.+Ê"VŽÊ0À>˜Ã“ˆÍÍi`R Q!Ö“Ê.---.+Ê"VŽÊ-iViˆÜi`R Q!Ö“Ê.!-Ê0À>˜Ã“ˆÍÍi`R Q!Ö“Ê.!-Ê-iViˆÜi`R Q!Ö“Ê.!-Ê-iÍÀ>˜Ã“ˆÍÊ0À>˜Ã“ˆÍÍi`R Q!Ö“Ê.!-Ê-iÍÀ>˜Ã“ˆÍÊ-iViˆÜi`R Q!Ö“Ê.!-Ê"VŽÊ0À>˜Ã“ˆÍÍi`R Q!Ö“Ê.!-Ê"VŽÊ-iViˆÜi`R Q!Ö“Ê+#>>Ê0À>˜Ã“ˆÍÍi`RÊ Q!Ö“Ê+#>>Ê-iViˆÜi`RÊ Q!Ö“Ê.0"0Ê0À>˜Ã“ˆÍÍi`R Q!Ö“Ê.0"0Ê-iViˆÜi`R Q!Ö“Ê2.0"0Ê0À>˜Ã“ˆÍÍi`RÊ Q!Ö“Ê2.0"0Ê-iViˆÜi`RÊ Q!Ö“Ê.-Ê0À>˜Ã“ˆÍÍi`RÊ Q!Ö“Ê.-Ê-iViˆÜi`R 2-192 SmartCell 6A000/ZX-250 Reference Manual &F’4•az›apm !Ö“LiÀÊœvÊ-..:!+Ê>VŽÊ+-2ÃÊÍÀ>˜Ã“ˆÍÍi`°Ê !Ö“LiÀÊœvÊ-..:!+Ê>VŽÊ+-2ÃÊÀiViˆÜi`° !Ö“LiÀÊœvÊ.--#-Ê-.+#7.-:Ê+-2ÃÊÍÀ>˜Ã“ˆÍÍi`°Ê !Ö“LiÀÊœvÊ.--#-Ê-.+#7.-:Ê+-2ÃÊÀiViˆÜi`°Ê !Ö“LiÀÊœvÊ.--#-Ê-.+#7.-:ÊÀiÍÀ>˜Ã“ˆÍÊ+-2ÃÊÍÀ>˜Ã“ˆÍÍi`°Ê !Ö“LiÀÊœvÊ.--#-Ê-.+#7.-:ÊÀiÍÀ>˜Ã“ˆÍÊ+-2ÃÊÀiViˆÜi`° !Ö“LiÀÊœvÊ.--#-Ê-.+#7.-:Ê"+=Ê+-2ÃÊÍÀ>˜Ã“ˆÍÍi`Ê !Ö“LiÀÊœvÊ.--#-Ê-.+#7.-:Ê"+=Ê+-2ÃÊÍÀ>˜Ã“ˆÍÍi`° !Ö“LiÀÊœvÊ.!-Ê+-2ÃÊÍÀ>˜Ã“ˆÍÍi`°Ê !Ö“LiÀÊœvÊ.!-Ê+-2ÃÊÀiViˆÜi`°Ê !Ö“LiÀÊœvÊ.!-ÊÀiÍÀ>˜Ã“ˆÍÊ+-2ÃÊÍÀ>˜Ã“ˆÍÍi`°Ê !Ö“LiÀÊœvÊ.!-ÊÀiÍÀ>˜Ã“ˆÍÊ+-2ÃÊÀiViˆÜi`°Ê !Ö“LiÀÊœvÊ.!-Ê"+=Ê+-2ÃÊÍÀ>˜Ã“ˆÍÍi`°Ê !Ö“LiÀÊœvÊ.!-Ê"+=Ê+-2ÃÊÀiViˆÜi`°Ê !Ö“LiÀÊœvÊ+#>>Ê+-2ÃÊÍÀ>˜Ã“ˆÍÍi`°Ê !Ö“LiÀÊœvÊ+#>>Ê+-2ÃÊÀiViˆÜi`°Ê...
Page 217 Q!Ö“Ê.-Ê-Ö«•ˆV>Íi`R Q!Ö“.Ê-Ê-iÍÀ>˜Ã“ˆÃÃˆœ˜Ê-iµÊ.i˜ÍR Q!Ö“Ê.-Ê-iÍÀ>˜Ã“ˆÃÃœ˜Ê-iµÊ-VÜ`R Q!Ö“Ê0ˆ“iÃÊ09ÊÊ8ˆ˜`œÝÊ.“«ÍßR Q!Ö“Ê ""Ê.ÀÀœÀÃR Q!Ö“Ê0ˆ“iÃÊ!#-..+#!..Ê.Þ«ˆÀi`R Q!Ö“Ê >ÞÊ0ˆ“iÃÊ0++Ê0ˆ“iÀÊ.Þ«ˆÀi`R Q!Ö“Ê7˜Ü>•ˆ`Ê+-2ÃÊ-iViˆÜi`R Q!Ö“Ê.ÀÀœÀÊ+-2ÃÊ-iViˆÜi`R Description 3zF•"›p• 6"•"hF›F•’˜—˜6F•ha’’apm’ Q+œÀÍ!Ö“LiÀRÊ•«œÀÍ˜Ö“LiÀ€ show sscopstatistics "•• &F’4•az›apm !Ö“LiÀÊœvÊ.-Ê+-2ÃÊÀiÍÀ>˜Ã“ˆÍÍi`° !Ö“LiÀÊœvÊ.-Ê+-2ÃÊ>VŽ˜œÝ•i`}i`°Ê !Ö“LiÀÊœvÊ.-Ê+-2ÃÊ`i•ˆÜiÀi`°Ê !Ö“LiÀÊœvÊ.-Ê+-2ÃÊ`Ö«•ˆV>Íi`°Ê !Ö“LiÀÊœvÊ.-ÊÀiÍÀ>˜Ã“ˆÃÃˆœ˜ÊÀiµÖiÃÍÃÊÃi˜Í°Ê !Ö“LiÀÊœvÊ.-ÊÀiÍÀ>˜Ã“ˆÃÃˆœ˜ÊÀiµÖiÃÍÊÀiViˆÜi`°Ê !Ö“LiÀÊœvÊÍˆ“iÃÊÍÀ>˜Ã“ˆÍÊÝˆ˜`œÝÊLiVœ“iÊi“«Íß° !Ö“LiÀÊœvÊ ""ÊiÀÀœÀÃÊœVVÖÀÀi`° !Ö“LiÀÊœvÊÍˆ“iÃÊ!#-..+#!..ÊÍˆ“iÀÊiÞ«ˆÀi`° >Þˆ“Ö“Ê˜Ö“LiÀÊœvÊÍˆ“iÃÊÍˆ“iÀÊ0++ÊiÞ«ˆÀi`ÊÝ…ˆ•iÊÝ>ˆÍˆ˜}ÊvœÀÊ *.57!Ê+-2° !Ö“LiÀÊœvÊˆ˜Ü>•ˆ`Ê+-2ÃÊÀiViˆÜi`° !Ö“LiÀÊœvÊiÀÀœÀÊ+-2ÃÊÀiViˆÜi`° &F’4•az›apm -ˆÃ«•>ßÃÊ..+#+ÊÃÍ>ÍˆÃÍˆVÃ° SmartCell 6A000/ZX-250 Reference Manual 2-193...
Page 218 No of MAA errors No of times NORESPONSE expired No of max times TCC timer expired No of Invalid PDUs received No of Error PDUs received switch_prompt # 2-194 SmartCell 6A000/ZX-250 Reference Manual : a2 : A2 : 17 : 17 : 17...
Page 219: Svc
,mz¤›˜6"•"hF›F• &F’4•az›apm Q+œÀÍ!Ö“LiÀR +œÀÍÊ˜Ö“LiÀÊœ˜ÊÍ…iÊÃÝˆÍV…° 3¤›z¤›˜6"•"hF›F• &F’4•az›apm Q+œ˜˜Ê7`R 7`i˜ÍˆvˆiÀÊÖ˜ˆµÖiÊvœÀÊi>V…ÊVœ˜˜iVÍˆœ˜° Q>œÝÊ+œÀÍR +œÀÍÊÀiViˆÜˆ˜}ÊÍ…iÊL>VŽÝ>À`Êv•œÝÊœvÊÍ…iÊ…ˆ}…É•œÝÊ«>ˆÀ° Q>œÝÊ7+7R >œÝÊ7+7Ê-ÜˆÀÍÖ>•Ê«>Í…Êˆ`i˜ÍˆvˆiÀ®Ê˜Ö“LiÀ°Ê Q>œÝ7+7R >œÝÊ7+7Ê-ÜˆÀÍÖ>•ÊVˆÀVÖˆÍÊˆ`i˜ÍˆvˆiÀ®Ê˜Ö“LiÀ° Q>œÝÊ0ß«iR >œÝÊ«œÀÍÊVœ˜˜iVÍˆœ˜ÊÍß«iÊ-+ +ÊœÀÊ+0+®° Q6ˆ}…Ê+œÀÍR +œÀÍÊÃi˜`ˆ˜}ÊÍ…iÊvœÀÝ>À`Êv•œÝÊœvÊÍ…iÊ…ˆ}…É•œÝÊ«>ˆÀ° Q6ˆ}…Ê7+7R 6ˆ}…Ê7+7Ê-ÜˆÀÍÖ>•Ê«>Í…Êˆ`i˜ÍˆvˆiÀ®Ê˜Ö“LiÀ° Q6ˆ}…Ê7+7R 6ˆ}…Ê7+7Ê-ÜˆÀÍÖ>•ÊVˆÀVÖˆÍÊˆ`i˜ÍˆvˆiÀ®Ê˜Ö“LiÀ° Q6ˆ}…Ê0ß«iR 6ˆ}…Ê«œÀÍÊVœ˜˜iVÍˆœ˜ÊÍß«iÊ-+ +ÊœÀÊ+0+®° Q+Ài>Íˆœ˜Ê0ˆ“iR 0ˆ“iÊÝ…i˜ÊÍ…iÊ.7+ÊÝ>ÃÊiÃÍ>L•ˆÃ…i`Ê-ÝˆÍ…ÊÀiÃ«iVÍÊÍœÊÍ…iÊLœœÍÊÍˆ“iÊœ˜ÊÍ…iÊÃÝˆÍV…®°Ê -ˆÃ«•>ßi`Êˆ˜Ê6œÖÀ\ ˆ˜ÖÍi\.iVœ˜`ÃÊvœÀ“>Í° ="d¤F—)aFd=˜9a«F &FO"¤d› "£°°°"{]Ê*£°°°*Ï]Ê+£°°°+{]Ê ">> -£°°°-{]Ê">> SmartCell 6A000/ZX-250 Reference Manual 2-195...
Page 220 # show svc PortNumber(ALL) : a1 ==================================================================== Conn | Port Vpi Vci Type | Port ==================================================================== switch_prompt # 2-196 SmartCell 6A000/ZX-250 Reference Manual &F’4•az›apm -ˆÃ«•>ßÃÊ.7+-Ã®ÊvœÀÊÃÊ>«iVˆvˆi`Ê«œÀÍ High CreationTime Vci Type | (Hr:Min:Sec) 0: 5:20 0: 5:20 0: 5:20 0: 5:20...
Page 221: Svcbyid
In the Output Parameter table below, (</d>) indicates parameters that are available only through the show svdbyid /d (detailed) command 3¤›z¤›˜6"•"hF›F• Q>œÝÊ+œÀÍR Q>œÝÊ7+7R Q>œÝÊ7+7R Q>œÝÊ+>ÃÍÊ0ß«iR Q6ˆ}…Ê+œÀÍR Q6ˆ}…Ê7+7R Q6ˆ}…Ê7+7R Q6ˆ}…Ê+>ÃÍÊ0ß«iR Q+Ài>Íˆœ˜Ê0ˆ“iR ="d¤F—)aFd=˜9a«F &F’4•az›apm +œÀÍÊÀiViˆÜˆ˜}ÊÍ…iÊL>VŽÝ>À`Êv•œÝÊœvÊÍ…iÊ…ˆ}…É•œÝÊ«>ˆÀ° >œÝÊ7+7Ê-ÜˆÀÍÖ>•Ê«>Í…Êˆ`i˜ÍˆvˆiÀ®Ê˜Ö“LiÀ°Ê >œÝÊ7+7Ê-ÜˆÀÍÖ>•ÊVˆÀVÖˆÍÊˆ`i˜ÍˆvˆiÀ®Ê˜Ö“LiÀ° >œÝÊ«œÀÍÊVœ˜˜iVÍˆœ˜ÊÍß«iÊ-+ +ÊœÀÊ+0+®° +œÀÍÊÃi˜`ˆ˜}ÊÍ…iÊvœÀÝ>À`Êv•œÝÊœvÊÍ…iÊ…ˆ}…É•œÝÊ«>ˆÀ° 6ˆ}…Ê7+7Ê-ÜˆÀÍÖ>•Ê«>Í…Êˆ`i˜ÍˆvˆiÀ®Ê˜Ö“LiÀ° 6ˆ}…Ê7+7Ê-ÜˆÀÍÖ>•ÊVˆÀVÖˆÍÊˆ`i˜ÍˆvˆiÀ®Ê˜Ö“LiÀ° 6ˆ}…Ê«œÀÍÊVœ˜˜iVÍˆœ˜ÊÍß«iÊ-+ +ÊœÀÊ+0+®° 0ˆ“iÊÝ…i˜ÊÍ…iÊ.7+ÊÝ>ÃÊiÃÍ>L•ˆÃ…i`Ê-ÝˆÍ…ÊÀiÃ«iVÍÊÍœÊLœœÍÊÍˆ“iÊœvÊÍ…iÊ ÃÝˆÍV…®°Ê-ˆÃ«•>ßi`Êˆ˜Ê6œÖÀ\ ˆ˜ÖÍi\.iVœ˜`ÃÊvœÀ“>Í° SmartCell 6A000/ZX-250 Reference Manual 2-197 &FO"¤d› ˜É>...
Page 222 </d> Q!Ö“LiÀÊœvÊ+i••ÃÊ-iViˆÜi`Êˆ˜Ê*ŽÝÊ-ˆÀiVÍˆœ˜RÊ </d> Q!Ö“LiÀÊœvÊ+i••ÃÊ-Àœ««i`Êˆ˜Ê4Ý`Ê-ˆÀiVÍˆœ˜RÊ </d> Q!Ö“LiÀÊœvÊ+i••ÃÊ-Àœ««i`Êˆ˜Ê*ŽÝÊ-ˆÀiVÍˆœ˜RÊ </d> Q!Ö“LiÀÊœvÊ.«`Ê+>VŽiÍÃÊ-Àœ««i`Êˆ˜Ê4Ý`Ê -ˆÀiVÍˆœ˜RÊ</d> Q!Ö“LiÀÊœvÊ.«`Ê+>VŽiÍÃÊ-Àœ««i`Êˆ˜Ê*ŽÝÊ -ˆÀiVÍˆœ˜RÊ</d> Description 3zF•"›p• 6"•"hF›F•’˜—˜6F•ha’’apm’ show svcbyi [ConnID] <connectionid> "`“ˆ˜ˆÃÍÀ>ÍœÀ 2-198 SmartCell 6A000/ZX-250 Reference Manual &F’4•az›apm "`“ˆ˜ˆÃÍÀ>ÍˆÜiÊÃÍ>ÍÖÃÊ-2+ÊœÀÊ-#8!®° #«iÀ>Íˆœ˜>•ÊÃÍ>ÍÖÃÊ-2+ÊœÀÊ-#8!®° .>À•ßÊ«>VŽiÍÊ`ˆÃV>À`ÊvœÀÊÍ…iÊVÀœÃÃÊVœ˜˜iVÍÊ>ÃÊV>•VÖ•>Íi`ÊLßÊ+"+°Ê +œÀÍÊÀiViˆÜˆ˜}ÊÍ…iÊvœÀÝ>À`ÊÍÀ>vvˆVÊv•œÝÊœvÊÍ…iÊ…ˆ}…É•œÝÊ«>ˆÀ° +i••Ê•œÃÃÊÀ>ÍˆœÊœ˜ÊÍ…ˆÃÊ7+° +Ö“Ö•>ÍˆÜiÊVi••Ê`i•>ßÊÜ>Àˆ>Íˆœ˜Êœ˜ÊÍ…ˆÃÊ7+° >Þˆ“Ö“ÊVi••ÊÍÀ>˜ÃviÀÊ`i•>ßÊœ˜ÊÍ…ˆÃÊ7+° +Ö“Ö•>ÍˆÜiÊVi••ÊÍÀ>˜ÃviÀÊ`i•>ßÊœ˜ÊÍ…ˆÃÊ7+° !Ö“LiÀÊœvÊVi••ÃÊÀiViˆÜi`Êˆ˜ÊÍ…iÊvœÀÝ>À`Ê`ˆÀiVÍˆœ˜° !Ö“LiÀÊœvÊVi••ÃÊÀiViˆÜi`Êˆ˜ÊÍ…iÊL>VŽÝ>À`Ê`ˆÀiVÍˆœ˜° !Ö“LiÀÊœvÊVi••ÃÊ`Àœ««i`Êˆ˜ÊÍ…iÊvœÀÝ>À`Ê`ˆÀiVÍˆœ˜° !Ö“LiÀÊœvÊVi••ÃÊ`Àœ««i`Êˆ˜ÊÍ…iÊL>VŽÝ>À`Ê`ˆÀiVÍˆœ˜° !Ö“LiÀÊœvÊi>À•ßÊ«>VŽiÍÊ`ˆÃV>À`Ê«>VŽiÍÃÊ`Àœ««i`Êˆ˜ÊÍ…iÊvœÀÝ>À`Ê `ˆÀiVÍˆœ˜° !Ö“LiÀÊœvÊi>À•ßÊ«>VŽiÍÊ`ˆÃV>À`Ê«>VŽiÍÃÊ`Àœ««i`Êˆ˜ÊÍ…iÊL>VŽÝ>À`Ê...
Page 223 # High CreationTime Vpi Vci Type | (Hr:Min:Sec) 0: 5:20 : 704 : A1 : 41 : PTP : A3 : 41 : PTP : UP : UP : 0:5:20:0 : DISABLED : DISABLED SmartCell 6A000/ZX-250 Reference Manual 2-199...
Page 224: Switch
Parameters Input Parameter Description [ServerIP] IP address of the backup server. [Path] Pathname of the backup directory. 256 characters 2-200 SmartCell 6A000/ZX-250 Reference Manual Value/Field Size Default dot decimal/ NONE 7-15 characters backup: public/smartcell.ztr (initially, then last path used) restore: public/smartcell.ztr...
Page 225 Confirm(y/n)?: y switch_prompt # Description Backs up the configuration of the switch to an end station. This command backs up the switch configuration only. It does not back up the load image. It will prompt you for the IP address of the workstation to which you are saving the switch configuration as well as the backup path and filename.
Page 226: Switchconfig
SwitchConfig Use SwitchConfig (switch configuration) to manage switch-related parameters, like switchname and IP address. Operators modify, show Parameters Input Parameter Description [SwitchName] Name of the switch. [IPAddress] IP address of Ethernet port on the switch. dot decimal/ [IPNetMask] IP netmask of the client. Defaults to the appropriate netmask, based on IP address class.
Page 227 Value/Field Size kilobytes/Up to 5 characters Redundant, Non-Redundant 1 character 1 character 1 character 1 character k cells 1, 2, 3, 4 1, 2, 3, 4... 155 Mbps, 622 Mbps 0.0.0.0 - 255.255.255.255 00:20:d4:XX:XX:XX Server SmartCell 6A000/ZX-250 Reference Manual 2-203...
Page 228 Examples switch_prompt # modify switchconfig SwitchName(switch_1) IPAddress(200.30.72.122) IPNetMask(255.255.255.0) switch_prompt # 2-204 SmartCell 6A000/ZX-250 Reference Manual Value/Field Size day/month/date/ hr:min:sec year bytes bytes/bytes/% Description Runs automatically when you first configure the switch, then prompts you for the required input. Enter...
Page 230: Switchname
[SwitchName] <newswitchname> switchname Administrator Example switch_prompt # modify switchname SwitchName(switch_1): switch_2 switch_prompt # 2-206 SmartCell 6A000/ZX-250 Reference Manual Value/Field Size Up to 19 characters Description Changes the name you gave your switch. You can also change switchname using modify switchconfig change other switch features at the same time.
Page 231: Switchtrafficcongestion
Console Commands SwitchTrafficCongestion Use SwitchTrafficCongestion to manage global switch traffic congestion thresholds on the switch. Operators modify, show Parameters Parameter [Queue # EFCI Threshold] [Low EPD Watermark/Threshold] [High EPD Watermark/Threshold] [Switch Discard Threshold] [RM Cell Marking Enable] [EFCI Marking Enable]...
Page 232 High EPD Threshold Switch Discard Threshold RM Cell Marking Enable EFCI Cell Marking Enable switch_prompt # 2-208 SmartCell 6A000/ZX-250 Reference Manual Descriptions Modifies the congestion control parameters for the switch. For example, the EFCI thresholds indicate when a threshold is exceeded; the switch discard threshold discards cells when the memory buffer is full.
Page 233: Trafficdescriptor
Q++-+>+ä³£R +i>ŽÊVi••ÊÀ>ÍiÊ+>+ÊrÊä³£Ê -ˆ˜Ê=ˆ•œ*ˆÍÃÊ«iÀÊÃiVœ˜`®° Q++-+>+äR +i>ŽÊVi••ÊÀ>ÍiÊ+>+ÊrÊä -ˆ˜Ê=ˆ•œ*ˆÍÃÊ«iÀÊÃiVœ˜`®° ="d¤F—)aFd=˜9a«F +*-Ê -07*- !-07*- "*-Ê .iÜi˜Ê«œÃÃˆL•iÊVœ“Lˆ˜>Íˆœ˜Ã]ÊÀi«ÀiÃi˜Íi`ÊLßÊ >˜ßÊœvÊÍ…iÊvœ••œÝˆ˜}Ê˜Ö“LiÀÃ\ÊÔ†ÇÊœÀÊ££° +i>Ž+i••->ÍiÊ+>+ä³£Ê-Ô® +i>Ž+i••->ÍiÊ+>+ä³£]Ê+i>Ž+i••->ÍiÊ+>+äÊ -Ï® +i>Ž+i••->ÍiÊ+>+ä³£]Ê+i>Ž+i••->ÍiÊ+>+ä]Ê 0>}Ê+>+ÊrÊ£Ê-{® +i>Ž+i••->ÍiÊ+>+ä³£]Ê.ÖÃÍ+i••->ÍiÊ +>+ä³£]Ê >Þ*ÖÀÃÍ.ˆãiÊ+>+ä³£-x® +i>Ž+i••->ÍiÊ+>+ä³£]Ê.ÖÃÍ+i••->ÍiÊ+>+ä]Ê >Þ*ÖÀÃÍ.ˆãiÊ+>+äÊ-È® +i>Ž+i••->ÍiÊ+>+ä³£]Ê.ÖÃÍ+i••->ÍiÊ+>+ä]Ê >Þ*ÖÀÃÍ.ˆãiÊ+>+ä]Ê0>}Ê+>+ÊrÊ£-Ç® *iÃÍ.vvœÀÍÊ-££® +œÃˆÍˆÜiÊˆ˜Íi}iÀ =iÀœÊœÀÊ«œÃˆÍˆÜiÊˆ˜Íi}iÀ =iÀœÊœÀÊ«œÃˆÍˆÜiÊˆ˜Íi}iÀ SmartCell 6A000/ZX-250 Reference Manual 2-209 &FO"¤d› 2*-Ê ÔÊ ˜É> £ää ä...
Page 235 QOSCLASS(1) AALTYPE(5) switch_prompt # switch_prompt # delete trafficdescriptor Executing this command : delete TrafficDescriptor TrafficDescriptorIndex() switch_prompt # &F’4•az›apm +Ài>ÍiÃÊ>Ê˜iÝÊÍÀ>vvˆVÊ`iÃVÀˆ«ÍœÀ° -i•iÍiÃÊ>ÊÍÀ>vvˆVÊ`iÃVÀˆ«ÍœÀ° .…œÝÃÊÍÀ>vvˆVÊ`iÃVÀˆ«ÍœÀÃ° : CBR : 200 : 200 : 200 : 200 : 200 : 200 SmartCell 6A000/ZX-250 Reference Manual 2-211...
Page 236 # show trafficdescriptor Executing this command : show TrafficDescriptor =================================================================================== Traff Desc Peak Cell Rate Type Type CLP_0 ==================================================================================== switch_prompt # 2-212 SmartCell 6A000/ZX-250 Reference Manual Sust Cell Rate Max Burst Size (Kb/s) (Kb/s) CLP_0+1 CLP_0 CLP_0+1 Console Commands (Kb) Type...
Page 237: Trapcommunity
Console Commands TrapCommunity Use TrapCommunity to manage the list of hosts that the switch sends trap notifications to concerning significant events. Each trap community has a name, IP address, and port number. The trap community name and address combination must be unique.
Page 238 # show trapcommunity TrapCommunity Name =========================================================================== trapcomm switch_prompt # 2-214 SmartCell 6A000/ZX-250 Reference Manual Descriptions Creates a trap community entry on the switch. Removes an existing trap community from the switch. Displays all trap communities configured on the switch.
Page 239: Trustednms
TrustedNMS Use TrustedNMS (trusted network management system) to configure a “trusted network management system” on the switch. The trusted NMS is identified by its IP address. Only the trusted network management system is allowed to perform critical operations such as: •...
Page 240 # 2-216 SmartCell 6A000/ZX-250 Reference Manual Description Configures the switch to treat a particular host IP address as a trusted NMS. Displays the currently configured IP address of the host that is treated as the trusted NMS. If trusted NMS is not configured, it will display 0.0.0.0.
Page 241: Vccmask
Use VCCMask (virtual channel connection mask) to manage the combination of VPI (virtual path identifier) bit and VCI (virtual channel identifier) bit settings. There are only four different VCC mask entries allowed by the switch and the VPI and VCI shift must total 12.
Page 242 Examples switch_prompt # modify vccmask MaskIndex(0) VPIShift(0) VCIShift(0) switch_prompt # switch_prompt # show vccmask MaskIndex Vpi Bits Vci Bits =========================================================================== switch_prompt # 2-218 SmartCell 6A000/ZX-250 Reference Manual Console Commands...
Page 243: Boot Load Commands
Boot Load Commands 3 BOOT LOAD COMMANDS This chapter describes the low-level boot load commands. Boot load commands are used for setting switch start-up behavior and for performing software downloads. Use the boot load commands to: • Set which copy of the boot load software is the default copy •...
Page 244: Accessing The Boot Load Commands
Accessing the Boot Load Commands Boot load commands are executed from the boot load prompt. The boot load prompt is not part of the switch console, and is accessible only after a reboot and before the switch software is loaded. Perform the following steps to gain access to the boot load prompt: s•...
Page 245: Chpi
Set the boot load software image in boot PROM location 1 as the default image. =>chpi 1 Modifying Default value for Boot Load Software, please wait... New default Boot Load Software value programmed successfully. New Default Boot Load Software value: 1 => SmartCell 6A000/ZX-250 Reference Manual 3-3...
Page 246: Clfs
Clearing Flash File System, please wait... Successfully cleared Flash File System => 2p›F After you return to the switch console (exit the boot prompt) following series of messages appears at the console ending with the At the password: to reinitialize the flash file system and reboot again to enable normal config switch operation.
Page 247: Dcfg
Default Boot Load Software: 0 Boot Load Software0 Rev Number = Boot Load Software1 Rev Number = MAC address: 0 20 d4 14 85 0 Number of contiguous MAC addresses, starting at this base: 80 POST OFF => SmartCell 6A000/ZX-250 Reference Manual 3-5...
Page 248 (download firmware) to download software images from a TFTP/Bootp server to the flash RAM of the switch. 2p›F Be sure the location and names of the image files are known to the TFTP/Bootp server to allow the server to automatically download the files to the switch.
Page 249 Boot Load Commands Use the command to exit the boot load prompt and run switch software (with or without POST). Parameter Explanation Bypass POST and go directly to switch software. Run POST, and then run switch software. none Same as ;...
Page 250 0 ..changes the Boot Load default to be Boot Load Software0; 1 ..changes the Boot Load default to be Boot Load Software1 Changes Boot Load default to be Boot Load Software (0) or (1) 3-8 SmartCell 6A000/ZX-250 Reference Manual Boot Load Commands ) can be...
Page 251: Ponf
Boot Load Commands ponf to set whether POST diagnostics are run by default when the switch is started. ponf Parameter Explanation POST is off. Switch goes directly to start-up. POST is on. Switch runs POST before going to switch operating software.
Page 252 Boot Load Commands 3-10 SmartCell 6A000/ZX-250 Reference Manual...
Page 253: Appendix A Acronyms
Application Programming Interface Address Resolution Protocol ASCII American Standard Code for Information Interchange Asynchronous Transfer Mode Bridged Ethernet Bit Error Ratio (Rate) B-ICI Broadband Inter-Carrier Interface B-ISDN Broadband Integrated Services Digital Network BOOTP Boot Protocol SmartCell 6A000/ZX-250 Reference Manual Appendix A-1...
Page 254 Congestion Indicator Cell Loss Priority Cell Loss Ratio CMIP Common Management Information Protocol Communication Class of Service Customer Premise Equipment Central Processing Unit Cyclic Redundancy Check Cell Relay Service Convergence Sublayer Cell Transfer Delay Appendix A-2 SmartCell 6A000/ZX-250 Reference Manual Acronyms...
Page 255 EISA Extended Industry Standard Architecture ELAN Emulated Local Area Network Electro-Magnetic Interference Enterprise Network Roundtable End of Frame Early Packet Discard EPROM Erasable Programmable Read-Only Memory Electro-Static Device End System Identifier Expansion Switch Module SmartCell 6A000/ZX-250 Reference Manual Appendix A-3...
Page 256 Header Error Check IEEE Institute of Electrical and Electronic Engineers ICMP Internet Control Message Protocol Identification Number Information Element IETF Internet Engineering Task Force IISP Interim Inter-Switch Signaling Protocol ILMI Integrated Local Management Interface Appendix A-4 SmartCell 6A000/ZX-250 Reference Manual Acronyms...
Page 257 ISDN Integrated Service Digital Network JPEG Joint Photographic Experts Group KB/S Kilobits per second Local Area Network LANE LAN Emulation LAN Emulation LE-ARP LAN Emulation-Address Resolution Protocol LANE Client LECS LAN Emulation Configuration Server SmartCell 6A000/ZX-250 Reference Manual Appendix A-5...
Page 258 Metropolitan Area Network MB/S Megabits per second Maximum Burst Size Minimum Cell Rate Management Information Base Multi-Mode Fiber Multi-Point Main Switch Module Maximum Transfer Unit NAKS Negative Acknowledges NDIS Network Driver Interface Specification Appendix A-6 SmartCell 6A000/ZX-250 Reference Manual Acronyms...
Page 259 Operations, Administration, Maintenance and Provisioning OC-1 Optical Carrier 1 OC-N Optical Carrier n (where "n" is an integer) Open Data-link Interface Out of Band Open Systems Interconnection Personal Computer Priority Control Peripheral Component Interconnect Peak Cell Rate SmartCell 6A000/ZX-250 Reference Manual Appendix A-7...
Page 260 ITU-T (International Telecommunications Union). Read-Only Access Random Access Memory Raw Cell Received Receive Deactivated Request for Comment Resource Management Return Merchandise Authorization Receive Queue Underrun RS-# Recommended Standard defined by Electronic Industries Association Appendix A-8 SmartCell 6A000/ZX-250 Reference Manual Acronyms...
Page 261 Synchronous Transport Module n - concatenated (where ‘n' is an integer) Shielded Twisted Pair STS-1 Synchronous Transport Signal 1 STS-N Synchronous Transport Signal n (where ‘n' is an integer) STS-NC Synchronous Transport Signal n - concatenated (where ‘n' is an integer) Switched Virtual Circuit SmartCell 6A000/ZX-250 Reference Manual Appendix A-9...
Page 262 UNI Management Entity User-Network Interface Unnumbered Poll Usage Parameter Control UTOPIA Universal Test and Operations Physical Interface for ATM Unshielded Twisted Pair VBR/RT Variable Bit Rate/Real Time VBR/NRT Variable Bit Rate/Non-real Time Virtual Circuit Appendix A-10 SmartCell 6A000/ZX-250 Reference Manual Acronyms...
Page 263 Acronyms Virtual Channel Connection Virtual Channel Identifier Virtual Channel Link VLAN Virtual LAN Virtual Path Virtual Path Connection Virtual Path Identifier Virtual Private Network Virtual Tributary Wide Area Network SmartCell 6A000/ZX-250 Reference Manual Appendix A-11...
Page 264 Acronyms Appendix A-12 SmartCell 6A000/ZX-250 Reference Manual...
Page 265: Appendix B Event/Alarm Messages
APPENDIX B EVENT/ALARM MESSAGES The SmartCell ZX-250 switch records and reports its operation in real-time using events and alarms. An event is the occurrence of a significant activity. Examples of events are a port going down or a client joining an ELAN. Alarms are a specific class of events defined as “those events that the user needs to know about or attend to right away.”...
Page 266 The event ID is an 8 or 9-digit decimal number that allows you to identify the source of the event or alarm. The first five or six digits indicate the software module associated with the switch activity. The remaining digits identify the specific type of activity.
Page 267 A complete list of event and alarm messages is beyond the scope of this manual. If a recovery action is not apparent from the message text (or context in which the switch activity occurred), contact your Cabletron representative for assistance. 000:00:23:502 SmartCell 6A000/ZX-250 Reference Manual Appendix B-3 Prefix(es) 33554 84017, 84148, 84279, 84344...
Page 268 Event/Alarm Messages Appendix B-4 SmartCell 6A000/ZX-250 Reference Manual...
Page 269: Appendix C Technical Support
APPENDIX C TECHNICAL SUPPORT This appendix tells you what to do if you need technical support for your SmartCell ZX-250 switch. Cabletron offers several support and service programs that provide high-quality support to our customers. For technical support, first contact your place of purchase. If you need additional assistance, contact Cabletron Systems, Inc. There are several easy ways to reach Cabletron Customer Support and Service.
Page 270: Hardware Warranty
Hardware model number, software version, and switch configuration (that is, what part types are in what slots) Hardware Warranty Cabletron warrants its products against defects in the physical product for one year from the date of receipt by the end user (as shown by Proof of Purchase).
Page 272 2-84 ForwardDelay Forwards parameter...2-16, Frame Timeouts parameter... 2-18 Frame Type parameter ...2-152 I-2 SmartCell 6A000/ZX-250 Reference Manual GatewayIP parameter go boot load command he boot load command Heap Space Used/Total/%Free help boot load command High EPD Watermark/Threshold ... 3-5...
Page 273 2-95 attribute...2-103 2-213 2-70 ...2-107 ...2-203 ...2-203 parameter...2-203 parameter...2-107 parameter... 2-18 parameter...2-18 ...2-107 2-200 ... 2-85 attribute...2-108 ...2-179 ...2-179 attribute...2-109 ...2-111 attribute...2-113 attribute...2-118 ...2-121 ...2-124 ...2-127 ...2-132 ...2-135 attribute2-137 attribute...2-139 ...2-143 2-145 command... 3-9 ...2-152 SmartCell 6A000/ZX-250 Reference Manual I-3...
Page 274 Rows switch attribute ... 2-177 ... 2-179 RQA Int parameter RQU Int parameter ... 2-178 ... 2-34 RxOctets parameter I-4 SmartCell 6A000/ZX-250 Reference Manual RxPkts parameter SAR Memory parameter 2-158 SARStat switch attribute SBE Int parameter 2-158 Secondary Flash Type parameter...
Page 275 VCC Rejects parameter... 2-18 VCCMask switch attribute... 2-217 VCCTimeout parameter ... 2-84 VciShift parameter ... 2-217 VPI/VCI parameter2-11, 2-38, 2-65, 2-89, VpiShift parameter ... 2-217 warranty... C-2 ... 2-154 parameter2-154 ... 2-209 ... 2-213 2-93 SmartCell 6A000/ZX-250 Reference Manual I-5...
Page 276 Index I-6 SmartCell 6A000/ZX-250 Reference Manual...

This manual is also suitable for:

Smartcell zx-250

Cabletron Systems SmartCell 6A000 Reference Manual

1 Introduction

2 Console Commands

3 Boot Load Commands

100 C Technical Support

Quick Links

Need help?

Questions and answers

Related Manuals for Cabletron Systems SmartCell 6A000

Summary of Contents for Cabletron Systems SmartCell 6A000

This manual is also suitable for:

Table of Contents