Clientstat - Cabletron Systems SmartCell 6A000 Reference Manual

ClientStat

Use ClientStat (client statistics) to view LANE (LAN emulation) or IP/ATM (IP over ATM) client statistics.
Operator
show
Parameters
Input Parameter
[ClientNumber]
In the Output Parameter table below,
(detailed) command. The (IP/ATM) and (LANE) client indicators after particular parameters indicate
clientstat /d
that these parameters will display only if that particular client type is active.
Output Parameter
[Client Type]
[RxPkts]
[TxPkts]
[RxOctets]
[TxOctets]
[Bytes Received]
(</d>)
[Unicast Packets]
(</d>)
[Multicast Packets]
(</d>)
[Broadcast Packets]
(</d>)
[Error Packets]
(</d>)
2-34 SmartCell 6A000/ZX-250 Reference Manual
Description
Number of the client.
appears next to parameters that are available only through the
(</d>)
Description
Type of client.
Number of packets received.
Number of packets transmitted.
Number of octets (bytes) received.
Number of octets (bytes) transmitted.
Number of bytes received.
Number of unicast packets received or transmitted.
Interface maximum transfer unit to assign to the local interface associated
with this client.
Number of broadcast packets received or transmitted.
Number of error packets received or transmitted.
Console Commands
Value/Field Size Default
0-127 ALL
show