Porttrafficcongestion - Cabletron Systems SmartCell 6A000 Reference Manual

PortTrafficCongestion

Use PortTrafficCongestion (port traffic congestion) to manage traffic congestion parameter for the specified port.
Operators
modify, show
Parameters
Parameter Description
[PortNumber] Port number on the switch.
[Queue # Value programmed into the switch for minimum/
Minimum/Maximum maximum threshold (in number of cells) for the
CellCounter] specified priority queue (where "#" is 1, 2, 3, or 4).
If the number of cells received by the switch on
the specified priority queue for this port exceeds
maximum threshold value, the switch discards the
cell.
Descriptions
Operator
modify
porttrafficcongestion
2-158 SmartCell 6A000/ZX-250 Reference Manual
Parameters/Permissions
[PortNumber] <portnumber>
[Queue#Min/MaxCellCounter]
<queue#min/maxcellcounter>
Administrator
Value/Field Size
ALL, A1...A4,
B1...B3, C1...C4,
D1...D4
0-8192
Description
Modifies the traffic congestion settings for a
specified port or all ports. You can change the
minimum and maximum buffer thresholds, in
cells, for each priority queue on a port. Cell buffer
memory then reserves the minimum buffer size for
cells on the specified priority queue of that port.
Cells are discarded when the maximum buffer
threshold is reached.
Console Commands
Default
ALL
20 (Min.)
8192 (Max.)