Ping - Cabletron Systems SmartCell 6A000 Reference Manual

Ping

Use Ping to test IP (internet protocol) connectivity of a client. However, the client must be on the same subnet or be
reachable by routing from the subnet that is pinging
Operator
start
Parameters
Input Parameter Description
[DestIP] IP address for ping packets.
[Count] Number of times you want to send ping
packets.
Description
Operator Parameters/Permissions
start ping [DestIP]
<destinationipaddress>
[Count] <numberoftries>
Administrator
Example
switch_prompt # start ping
DestIP() : 204.95.77.254
Count(1) : 1
204.95.77.254 is alive
switch_prompt #
2-108 SmartCell 6A000/ZX-250 Reference Manual
Value/Field Size
5-8 characters
1-100
Description
Starts the pinging of the external destination you are trying to
reach.
Console Commands
Default
Registered IP
address
1