Mynmaddr - Cabletron Systems SmartCell 6A000 Reference Manual

Console Commands

MyNMAddr

Use MyNMAddr (my network management address) to manage the switch through the specified IP address.
Operators
modify, show
Parameter
Parameter Description
[IPAddr] IP address of the switch.
Descriptions
Operator Parameters/Permissions
modify [IPAddress] <ipaddress>
mynmaddr
Administrator
show [IPAddress] <ipaddress>
mynmaddr
Administrator
Value/Field Size
dot decimal/15 characters
Description
Sets the IP address through which the switch allows itself to
be managed by the SNMP manager. The switch comes with a
default MyNMAddr that matches its Ethernet address.
However, MyNMAddr can be changed to an IP address that
corresponds to a LANE or IP/ATM (IP over ATM) client on
the switch. This allows the switch to be managed through an
ATM interface.
Displays the current IP address through which the switch
allows itself to be managed.
SmartCell 6A000/ZX-250 Reference Manual 2-103
Default
Registered IP
address