Set Snmp Read/Write Community - Cabletron Systems DIGITAL VNswitch 900CG Installation And Configuration Manual

[4] Configure IP

[1] Set SNMP Read/Write Community

This option prompts you to enter the module's read/write community name. The
community name can be used for read/write access control. The read/write community
name is case sensitive. The default is public.
The following example shows the dialog associated with this option:
VNswitch 900CG
================================================================
Format:
================================================================
Enter the community string [public] : <Return>
SNMP Read/Write community string set.
4-8 Configuring the Module in a DEChub ONE
SET SMNP READ/WRITE COMMUNITY
The format for a community name is a string,
consisting of 4 to 31 printable ASCII characters, that
describes the relationship between an SNMP agent and
one or more SNMP managers. The string defines the
authentication mechanism that is employed to validate
the use of the community by the sending SNMP entity.
Press Return for IP Configuration Menu...