GE Senographe DS Operator's Manual page 88

GE Healthcare
Revision 1
Worklist
When you select a single patient in the Worklist and click Edit..., or when you click New Patient... or
Start Exam, the Medical Procedure Card window is displayed.
PATIENT
Implant present
PROCEDURE
• For a new patient, all fields are blank; move the cursor (use the mouse, or use the Tab or Enter keys
to move through the fields) inside the Last Name, Middle Initial (optional) and First Name fields and
enter the patient name. Then move the cursor inside the Patient ID field and enter the patient ID.
If the patient has an implant (in whatever breast), tick "Yes" after "Implant present" label. In case the
review station used at your facility can read this field, it will automatically load an adequate protocol
and/or adapt the autowindowing for review of images of this patient.
• For a new study (existing patient) the patient information fields cannot be modified.
Complete the other fields as required, then click on the Start Exam button. The Medical Procedure
Card window closes, and the Viewer is displayed.
• For a patient selected on the HIS/RIS Worklist, verify that the information in all fields of the Medical
Procedure Card is correct and click Start Exam to begin the exam, or Cancel.
Chapter 9
Last Name
Middle Initial
First Name
Patient ID
Birth Date
Sex Male
Yes
Study ID
Study Description
Accession Number
Procedure Description
Operator
Performing Physician
Referring Physician
Scheduled date & time
Senographe DS Acquisition System
Medical Procedure Card
(Jan 02 2000) or (02 Jan 2000)
Female Other
No
May 20 2005 11:32
Page no. 88
Operator Manual 5307907-3-S-1EN
Save
Cancel
Start Exam
Routine Exam
9-worklist.fm