GE Senographe DS Operator's Manual page 71

GE Healthcare
Revision 1
• If the remote host cannot be reached, a pop-up message reports this fact; you should verify that
the remote host is operational and check the network cabling.
Call your network manager if the problem persists.
• If the Auto Push option is selected in Medical Application preferences, then all images in this
exam will be automatically sent to the selected destination after exam closure.
• To archive exams on the mass archiver, the archiver must be selected in the same way as a
remote host (select its icon as the drag-and-drop target, or its address as the push destination).
During a network transfer:
• To monitor network transfer tasks, click on the Network status display to open the Network queues
window, shown below:
Resume
: restart a paused queue
Pause
: temporarily halt the queue
Refresh
: update the queue window
(the queue window is NOT updated
automatically each time a job is fin-
ished).
8-browser.fm
Network queues
Push images
653/1 Active
2899 Pending
273/3
Pause Resume Clear
Pull images
653/1 Active
2899 Pending
273/3
Pause Resume Clear
Refresh Done
Page no. 71
Senographe DS Acquisition System
Operator Manual 5307907-3-S-1EN
Job currently in progress
Click on a job to select it (hold
<Ctrl> to select more than one)
Clear
then click on
job(s) from the queue
Done
: close queue window
Browser
to remove
Chapter 8