GE Senographe DS Operator's Manual page 69

GE Healthcare
Revision 1
6-5 Deleting images
To delete patients, examinations, series, or images from the image disk of the workstation, use one of
the Delete buttons:
• EITHER: Select the items you want to delete in the corresponding list, then click on the
Delete button under that list (if the button is not displayed, it can be turned on using the
Tools menu).
• OR: Drag the selected item using the middle mouse button, and drop it on the large Delete
icon at the bottom right hand corner of the screen.
A message window pops up asking you to confirm the delete operation. Click on OK to
confirm, or click on Cancel to cancel the operation.
If a delete button is displayed in grey, this indicates that the selected item is currently in use by an
application (Viewer or Network transfer), and therefore cannot be deleted.
• If the mass storage option is present, an Auto Delete function can be set. This automatically deletes
items from the local database when they have been committed by the storage device. The function
must be activated by GE Service.
6-6 Interchange media
If the Interchange Media option is installed on the system, you can use the Push button below the
patient list, exam list, or Image list on the Browser to save selected information on CD-R
(CD-Recordable) disks.
See Chapter 14 Interchange
8-browser.fm
Media.
Page no. 69
Senographe DS Acquisition System
Operator Manual 5307907-3-S-1EN
Browser
Chapter 8