GE Senographe DS Operator's Manual page 140

GE Healthcare
Revision 1
Printing
3-2 Manual Print
In addition to the Auto Print function, an image displayed on the Viewer screen can be printed at any
time under manual control.
Click the Print button
DICOM printers
PRINTER 1
PRINTER 2
PRINTER 3
Print
Facilities available from the Print Request window are:
• DICOM printers: contains the list of all the available DICOM printers that have been declared for
printing. Click on a printer in the list to select it.
• Review Rooms: contains the list of all environmental conditions of available review rooms. Select
the room corresponding to the printer. Refer to your field engineer or printer manufacturer for
review room configuration.
• Print mode: can not be changed. Fit to Film only.
• Number of Copies box: enter the required number of copies in this box.
• Printing properties ... button: click this button to open the Printing Properties window
(see section 3-3 Printer properties on page
• Print button: click this button to print the displayed image on the currently selected printer.
• Queue button: click this button to open the Filming Queue window (see section
on page 142).
• Save button: click this button to confirm any changes made and close the window.
• Cancel button: click this button to cancel any changes made and close the window.
Chapter 13
in the Viewer Function panel to open the Print Request window.
Print Request
Print mode
Review Rooms
Queue
141).
Page no. 140
Senographe DS Acquisition System
Operator Manual 5307907-3-S-1EN
Number Of Copies (1.. 9)
Printing properties ...
Save
Fit to Film
Cancel
3-5 Filming queue
13-print.fm