GE Senographe DS Operator's Manual page 75

GE Healthcare
Revision 1
8-3 Medical Application preferences
Select this option to open one of the windows shown and described below to set Medical Application
preferences. To change a setting, click the button beside the option to switch it between selected (
) and deselected (
window without saving.
Auto Push
Select Auto Push ON or OFF, the type of images to be transferred, and the name of the desired remote
host. Remote host information is set up by the FE at installation time.
Auto Push Auto Print
Remote Hosts
loupiac
stamour
Save
Auto Print
Select Auto Print ON or OFF, and the name of the desired DICOM printer. Information on available print-
ers is entered by the FE at installation time. Click the Printing properties ... button to set printing proper-
ties if required (refer to Chapter
Auto Push Auto Print
DICOM printers
Printer 1
Printer 2
Save
Note:
Film size used for autoprint is 8 x 10 inch
8-browser.fm
or ). After making changes, click Save to apply them or Close to leave the
Annotations Auto Windowing
Auto Push
Raw Proc
Raw Proc
Raw Proc
13 Printing). Only the default print mode of Fit to Film is available.
Annotations Auto Windowing
Auto Print
Number Of Copies (1.. 9)
Senographe DS Acquisition System
MedAppPrefs
Quality Check Auto Delete
ON
OFF
Both None
Both None
Both None
MedAppPrefs
Quality Check Auto Delete
ON
OFF
Fit to Film
Print mode
Printing properties ...
Page no. 75
Operator Manual 5307907-3-S-1EN
Test Hosts Names Image Process.
Close
Test Hosts Names Image Process.
Close
Browser
or
Chapter 8