GE Senographe DS Operator's Manual page 206

GE Healthcare
Revision 1
REV
1
5131764-4-100 April 12, 2006
5131764-5-100 November 24,
DATE
- Breast support terminology:
- Replaced "biopsy paddle" by "2D large localization paddle"
- Replaced "(small round) spot biopsy paddle" by "2D spot localization
paddle"
- Replaced "magnification platform" by "magnification stand"
- Replaced "square spot magnification paddle" by "7x7 square magnifi-
cation paddle"
- Replaced "cross-hair" by "2D cross-hair localizer"
- Replaced "Phlexis" by "flexible"
- Replaced "small round spot paddle" by "round spot paddle"
- Ch 5 Control Station, Section 1-2 Control Station Hardware, replaced
photo of control station with CSV2 with mouse in place of trackball.
- Ch 1 Control Station, Section 2 System Components, replaced photo of
control station with CSV2 with mouse in place of trackball.
- Pointing devices: Trackball becomes optional, mouse becomes stan-
dard pointing device.
- Ch 5 Control Station, Section 1-2 Control Station Hardware, added a
Caution about using only the handle to reorient the LCD monitor to avoid
pinching.
- Ch 15 Maintenance:
- created Section 1-1 Monitor cleaning instructions.
- Section 1-2 (previous 1-1) General information renamed General
information about disinfection.
- 1st bullet after 2nd Caution replaced "Do not use harsh detergents..."
by "Unless specified otherwise, do not use harsh detergents...".
- Section 1-3 (previous 1-2) replaced title "Equipment cleaning instruc-
tions" by "Patient contact surface cleaning instructions".
Release for M5B-2.
Update of 5131764-3-100. Main changes:
- Print images no longer show a ruler. References to and illustrations of
the ruler have been removed.
- SPR EURge39295. Message information and corrective actions for
errors I31 and I32 have been modified.
- SPR EURge47886. Notice added (chap. 5, section 3-2), warning of
possible damage to keyboard slides if excessive force is applied to the
keyboard.
- Page numbering corrected in manual 5131764-4-108.
Product: Senographe DS
2006 Program: Nephtys
Technical Release: M5B_FB
Added FB Exception information in
Printing chapter (section 3-6).
Added grid characteristics in Specifications chapter section 1-5).
Page no. 206
Senographe DS Acquisition System
Operator Manual 5307907-3-S-1EN
REASON FOR CHANGE
Viewer
chapter (section 1-1) and in
rev_ENG1.fm