GE Senographe DS Operator's Manual page 141

GE Healthcare
Revision 1
3-3 Printer properties
This window is accessed from either the Auto Print win-
dow, the Print Request window, or the Scrapbook Print
Manager panel. It displays the properties set for the
selected printer.
• Format and Magnification type cannot be changed
with the current Senographe DS release software.
• Media type: Blue film must be selected by default
with Senographe DS. Other choices will cause
printing errors.
• Destination: Processor must be selected by default
when using Senographe DS. Other choices will
incur printing errors.
• Film orientation: Portrait must be selected by
default when using Senographe DS. Other choices
will incur printing errors.
• Film size can be toggled between 8 in x 10 in and
10 in x 12 in.
3-4 Printing status
The Printing status window displays the status of the
requested printing jobs.
• If a job shows the OK comment, the exam has
successfully been sent to printing. If the job
shows the ABORTED comment, the job has
been aborted manually by the user from the
menu window buttons.
• Click the Queue button to open the Filming
Queue window (see section
on page 142).
13-print.fm
3-5 Filming queue
Page no. 141
Senographe DS Acquisition System
Operator Manual 5307907-3-S-1EN
Printer properties
PRINTER 2
Format Standard
Media type: Blue film
Destination Processor
Film orientation Portrait
Magnification type Cubic
Film size 8 in x 10 in
Save
Printing status
PRINTER 1 (10)
ABORTED
OK
PRINTER 2 (11)
Queue
Printing
Done
Done
Chapter 13