GE Senographe DS Operator's Manual page 177

Acquisition system
Hide thumbs Also See for Senographe DS:
Table of Contents

Advertisement

GE Healthcare
Revision 1
Message on
X-ray Console
S91 Need user action
on AWS
S92 AWS busy, please
wait...
S93 AWS busy
S94 System performing
test, wait
S95 Medical Applica-
tion not active
S96 System activity
conflict
S97 AWS reset in prog-
ress, wait
S98 Exp. inhibited CAL/
IQ in progress
S99 OFFSET ACQUISI-
TION IN PROGRESS
16-errors.fm
Explanation
Operator input is required on
AWS.
The AWS is busy, and the current
operation may take some time.
The AWS is busy (the wait should
be short).
An application is running on the
system and performing tests that
do not allow acquisition (example
auto-diagnostics).
AWS has not yet entered applica-
tion mode. This message is
always displayed after system
boot and after each close exam
even during review.
It is displayed because no appli-
cation is ready to get the image.
A diagnostic or calibration appli-
cation is running while the medi-
cal application is active.
AWS is being reconfigured. The
message is displayed until recon-
figuration is complete.
AWS is being reconfigured. The
message is displayed until recon-
figuration is complete.
AWS is being reconfigured. The
message is displayed until recon-
figuration is complete.
Page no. 177
Senographe DS Acquisition System
Operator Manual 5307907-3-S-1EN
Corrective Action
Respond to the AWS pop-up.
No action required, wait for completion of the cur-
rent operation.
No action required, wait for completion of the cur-
rent operation.
Wait a few minutes.
Start a new exam or QAP acquisition.
Check if several applications are running. If yes,
close one.
No action required.
No action required.
No action required.
Error messages
Chapter 16

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents