Table of Contents
Advertisement
CHAPTER 6: LOCAL MANAGEMENT
6.1
MANAGEMENT TERMINAL REQUIREMENTS
Use one of the following systems to access Local Management:
•
A Digital Equipment Corporation VT series terminal
•
A VT type terminal running emulation programs for the Digital
Equipment Corporation VT series
•
An IBM or compatible PC running a VT series emulation software
package
An RJ45 console cable is used to attach the management terminal to the
SEHI. The console cable is not included with the SEHI but may be
purchased separately from Cabletron as part number SEHI-ACCY-KIT
(this accessory kit also includes rackmount hardware).
The SEHI-ACCY-KIT package provides an RJ45 Cable Kit that includes
the following:
•
UTP console cable with RJ45 connectors on each end
•
Adapters for DB9 or DB25 connections
•
Instruction Sheet
The following sections explain how to attach the console cable and set up
the management terminal. Refer to the RJ45 Cable Kit Instruction Sheet
for adapter pinouts and additional information.
6.1.1 Console Cable Configuration
Use the RJ45 Cable Kit provided with the SEHI-ACCY-KIT package to
attach the management terminal to the SEHI COM port as shown in
Figure 6-1.
Connect the console cable to the SEHI as follows:
1. Attach the male RJ45 connector to the COM port of the SEHI.
6-2
SEHI USER'S GUIDE
Hide quick links:
Advertisement
Table of Contents
