Chapter 5: Local Management
5.3.1
Console Cable Connection
Use the Console Cable Kit provided with the 2H23-50R or 2H33-37R to
attach the management terminal to the 2H23-50R or 2H33-37R COM
port as shown in
Connect an IBM PC or compatible device, running the VT terminal
emulation, to the 2H23-50R or 2H33-37R as follows:
1.
Connect the RJ45 connector at one end of the cable (supplied in the
kit) to the COM port on the 2H23-50R or 2H33-37R.
2.
Plug the RJ45 connector at the other end of the cable into the
RJ45-to-DB9 adapter (supplied in the kit).
3.
Connect the RJ45-to-DB9 adapter to the communications port on
the PC.
Figure 5-1 Management Terminal Connection
5-4
Figure
5-1.
CONN 4
CONN 4
1
CONN 3
CONN 3
CONN 2
CONN 2
CONN 1
CONN 1
10
100
1
PWR
CPU
2H23-50R
RESE
COM
RJ45-to-DB9
PC
PC Adapter
12
1
CONN 3
CONN 4
12
1
CONN 1
CONN 2
RJ45 COM Port
UTP Cable
with RJ45 Connectors
2H23-50R/2H33-37R User's Guide
12
12
5
6
22861-50