Console Cable Connection - Cabletron Systems 2E48-27R User Manual

Chapter 5: Local Management
5.3.1

Console Cable Connection

Use the Console Cable Kit provided with the 2E4X-27R to attach the
management terminal to the 2E4X-27R COM port as shown in
Figure 5-1.
Connect an IBM PC or compatible device, running the VT terminal
emulation, to the 2E4X-27R as follows:
1. Connect the RJ45 connector at one end of the cable (supplied in the
kit) to the COM port on the 2E4X-27R.
2. Plug the RJ45 connector at the other end of the cable into the
RJ45-to-DB9 adapter (supplied in the kit).
3. Connect the RJ45-to-DB9 adapter to the communications port on
the PC.
RJ45 COM Port
Figure 5-1 Management Terminal Connection
5-4
TX RX TX RX
RX
PWR
17 18
RESET
CPU
COM
RX TX RX TX RX
9 10
RX TX RX TX RX
1 2
2E48-27R
RJ45-to-DB9
PC
PC Adapter
TX RX TX RX TX RX TX RX TX RX
19 20 21 22 23 24
TX RX TX RX TX RX TX RX TX RX
16
11 12 13 14 15
TX RX TX RX TX RX TX RX TX RX
3 4 5 6 7 8
UTP Cable
with RJ45 Connectors
2E48-27R/2E49-27R User's Guide
TX
TX
TX
25 26
23141-50