Setting Up The Instrument - PerkinElmer 200 UV/VIS Series User Manual

Setting Configuration Options

Setting Up the Instrument

This section describes how to set up the Detector and includes:
• Setting up the Lamp
• Setting the Screen Contrast and Screen Saver
• Setting the Analog Output
• Setting the System Clock
• Adjusting the "Smoothing" Mode
• Setting up the Leak Detector
You can perform all of these functions from the Instrument Setup Screen. The procedure for
accessing the Instrument Setup Screen is summarized here for your convenience.
The CNFG softkey is not available when a method
or sequence is running.
Configuring the Detector
6 - 3