Displaying The Current Method; Editing The Current Method - PerkinElmer 200 UV/VIS Series User Manual

Using Method Mode

Displaying the Current Method

Displaying the Current Method
When you switch the Detector to Method mode, the current method is the method that
appears on the display. The current method is the method that is controlling the detector. A
method contains two parts: control parameters and timed events. The control parameters
allow you set values for the method, such as a wavelength value and peak width value. The
timed events allow you to control the relay contact closures, which in turn can be used to
control auxiliary instruments such as an autosampler.

Editing the Current Method

Editing the current method involves making changes to the control parameters and timed
events.
Editing Detector Control Parameters
The Control Parameters are circled in the figure below.
4 - 6