Running A Method - PerkinElmer 200 UV/VIS Series User Manual

Table of Contents

Running a Method

You can run the current method by pressing the

stopped method you can press the

While you are running a method, the options for editing that method are limited. You can

only edit the method's future events. You cannot edit the current or previous events.

To run a method follow the procedure below.

To run the current method, press the

The detector runs the method and shows time passing in the TIME field. The detector

runs the first Step in the method. When that Step is complete, the detector automatically

runs the next Step. The detector repeats this process until all the Steps are run. While the

method is running, the detector status changes from READY to RUNxx (where "xx" is the

current step number). When the detector is finished running all of the Steps, the detector

status changes to READY and the display returns to Step 1.

key. This reinitializes the method to Step 1.

reset

METHOD SCREEN

key on the keypad. To restart a

run

key on the keypad.

run

Using Method Mode

4 - 19

Table of Contents