PerkinElmer 200 UV/VIS Series User Manual page 96

Using Method Mode
Press F6
1
Using the cursor arrow keys, move down through the list of stored methods until the
2
caret (>) is next to the method you want to recall, in this example, 2.
caret
Message line
Press F4
3
The message line displays the following prompt:
REPLACE CURRENT METHOD? (Y/N)
Press the
detector displays the selected method on the Method Screen.
4 - 16
MAIN SCREEN
from the Main Screen to go to the Directory Screen.
DIR
DIRECTORY SCREEN
DIRECTORY SCREEN
and the message line will change to the following:
RCL
numeric key to make the selected method the active method. The
1
yes
Recalling a Method from the Directory
F6