PerkinElmer 200 UV/VIS Series User Manual page 94

Using Method Mode
Press F6
STOR
1
prompting you to save changes to the method or to save the method with a new method
name and number.
Press F6
SVAS
2
Save Method Screen appears.
The message line indicating "Save Method As" prompts you for the method number. The
3
highlighted number that appears corresponds to the next available method number (1 -
20).
Press the
enter
type in a new value and then press
The message line indicating "Name Method" prompts you select Yes or No to name the
4
method. If you select Yes, the detector displays the Name Method screen. Use the cur-
sor arrow key to highlight a letter, then press the
Repeat this step to select other letters. If you make a mistake, you can press the
softkey to delete the letters. When you are finished, press the
4 - 14
METHOD EDIT SCREEN
from within the Method Edit Screen. The Save Method Screen appears
SAVE METHOD SCREEN
to save the method with a new method name and number. The second
SECOND SAVE METHOD SCREEN
key to accept the method number shown, or use the numeric keys to
enter
F6
F6
.
softkey to select the letter.
SEL
enter
Storing a Method
BKSP
key.