Using Method Mode
Viewing the Chromatogram
Press the View key to display the detector baseline prior to a run, or to display the chromato-
gram after the detector has been placed into run. The default scale for the Y axis is 1.0
AUFS. For the X axis, the time is 20 minutes when the detector is in the Ready state. At run,
the X axis displays the chromatogram for the total analysis time of the running method.
The up/down arrows decrease/increase the Y scale by a factor of two over the range 1.0 to
0.001 AUFS.
The following procedure describes how to view the chromatogram graphically.
To view the chromatogram, press F1
1
Screen, similar to the one below, appears.
When you are finished viewing the chromatogram, press the
2
current method.
4 - 20
MAIN METHOD SCREEN
F1
VIEW SCREEN
from the Main Method Screen. The View
VIEW
return
Viewing the Chromatogram
key to return to the