PerkinElmer 200 UV/VIS Series User Manual page 124

Configuring the Detector
NOTE: for the messages shown on this page, "ON INTERNAL LEAK DETECTOR ERROR" and "ON
EXTERNAL LEAK DETECTOR ERROR" ignore (IGNR) the messages. Notice that in this condition, the
default condition is "STOP".
From the Instrument Setup Screen, press F8
1
Setup Screen.
Press the
LEAK
2
Use the cursor arrow keys or the
3
sponding softkey to set the value in the field to STOP, CONT, or IGNORE.
To accept and save the change(s) and return to the Instrument Setup Screen, press
4
the key.
return
To cancel changes and return to the Instrument Setup Screen press the
6 - 14
INSTRUMENT SET-UP SCREEN - PAGE 2
softkey to access the Leak Detector Setup Screen.
LEAK DETECTOR SET-UP SCREEN
enter
Setting Configuration Options
to move to page two of the Instrument
MORE
key to move from field to field. Press the corre-
key.
quit