Procedure For Defining A Sequence (Continued) - PerkinElmer 200 UV/VIS Series User Manual

Defining a Sequence

Procedure for Defining a Sequence (continued)

When you press the
3
the same method number and number of injections as in the previous set. Use the
numeric keys to type in a new method number for the new set and number of injections.
Continue to add sets until you have entered all of the methods for the Sequence.
4
Remember, the maximum number of methods in a Sequence is 20.
To delete the entire sequence so that you can create a new sequence, press F8
5
Pressing the
To delete a specific step, select the step and press the
Press the
6
Press the
key or the
enter
SEQUENCE SCREEN
F1
key deletes all sets in the sequence.
DELS
key to save the changes and return to the Main Method Screen.
return
key to return to the Main Method Screen without saving your changes.
quit
key to add another set, the system uses
insert
delete
Using Sequences
F6 F8
DELS
key on the keypad.
.
5 - 7