Table of Contents
Advertisement
2020 Software Manual
Instrument
Concentration
Time
Status
Units
Date
Soft Key
Functions
Figure 5
Status Displays
The default display provides the following information: instrument
status, current detected concentration, time, date and measurement
units. The status display toggles between showing time and units and
then the date.
When the display mode is MAX, the date and time correspond to the
date and time the MAX concentration was recorded. In TWA
mode, the time represents the number of hours and minutes during
which the TWA has been accumulating. For PEAK and STEL
monitoring, the date and time correspond to the current date and
time.
Monitoring
Instrument Status
The instrument status is shown on the left of the first line of the
status display and on the Table and Graph outputs. Each status has a
priority assigned to it. If more than one status is in effect, then the
status with the highest priority is displayed until the condition is
corrected or until the option is turned off. Table 1 is a list of the
possible status messages.
44
Advertisement
Table of Contents
Troubleshooting
