Using Method Mode
To edit the control parameters, follow the procedure below.
From the Method Screen, press F2
1
screen displays the Steps in the method. The caret highlights Step 1.
METHOD EDIT SCREEN
You can use the cursor arrow keys, or the
2
the TIME field, enter a time value, such as 40.00 to indicate 40 minutes.
λ
In the
3
screen. The wavelength range depends on the Detector's configuration.
4 - 8
(wavelength) field, enter a wavelength within the range displayed on the
to display the Method Edit Screen. This
EDIT
key to move from field to field. In
enter
Editing the Current Method