PerkinElmer 200 UV/VIS Series User Manual page 120

Configuring the Detector
Setting the Recorder Adjust Value
The recorder adjust option allows you to calibrate the recorder. The following are the avail-
able recorder adjust settings:
• NORMAL: Sets the recorder to the normal setting.
To test the recorder, select one of these settings:
• CALB: Puts out 10 mv.
• ZERO: Sets the recorder output to zero volts.
ANALOG OUTPUT SCREEN
Use the cursor arrow key to navigate to the RECORDER ADJUST field. Select one of the
1
following softkeys to change the value in the field:
To accept and save the change(s) and return to the Instrument Setup Screen, press
2
the key.
return
To cancel changes and return to the Instrument Setup Screen press the
6 - 10
Setting Configuration Options
, , .
NORM CALB ZERO
quit
key.