PerkinElmer 200 UV/VIS Series User Manual page 49

Instrument Specifications
Specification
Control outputs
Control inputs
External Dimensions
Weight
Power Requirements
Optional Configurations
Description
4 SPDT relays, 1 A @ 48 V (max); Relay TE 2 is used to control
an external recorder for scanning.
RUN OUT: momentary (approximately 2 seconds) contact clo-
sure the instant a method starts. Used to "daisy chain" modules
together.
RDY: signals that the unit is ready to run.
TE1 and TE2: programmable outputs.
EXT RUN: same as pressing the run front panel key.
EXT STOP: same as pressing the reset front panel key.
AZ: same as pressing the AZ front panel key.
340 mm wide, 170 mm high, 495 mm deep. (13.4" W x 6.7" H x
19.5" D, Volume = 1750 c.i.)
25 lbs. 11.4 Kg.
100/120/220/230/240 VAC, 50/60 Hz, 130 VA max.
Microbore and preparative flowcells, Tungsten Lamp
Getting Started with the Detector
1 - 21