PerkinElmer 200 UV/VIS Series User Manual page 130

Configuring the Detector
Press F5
2
software version number, the lamp hours, and display hours. Press the down arrow
key to move from field to field. You can modify the lamp hours if necessary, for
example, you can reset the lamp hours when you install a new lamp in the Detector.
To view the Detector's error log, press F8
3
appears.
Press the cursor arrow keys to move from one field to the next. Press the
4
key to clear the error log. Press the
the key again to return to the Configure menu.
return
6 - 20
to display the LOG Screen. The LOG Screen displays the Detector's
LOG
LOG SCREEN
ERROR LOG SCREEN
. A screen similar to the following
ERR
key to return to the LOG Screen. Press
return
Setting Configuration Options
F8
soft-
CLR