Creating A New Method - PerkinElmer 200 UV/VIS Series User Manual

Using Method Mode

Creating a New Method

The current method is the method that appears on the display. You can edit the current
method by changing the method's operating parameters. You can also create a new method.
When you create a new method, the detector displays a one step method with the default
operating parameters. You can modify the default operating parameters to create the
method.
The following procedure describes how to create a new method.
From the Method Screen, press F2
1
screen displays the Steps in the current method.
METHOD EDIT SCREEN
To create a new method, press the
2
method with the default operating parameters.
Use the cursor arrow keys, or the
3
changes as necessary. For more information on editing the operating parameters,
see the "Editing a Current Method" topic earlier in this chapter.
To add another Step to the method, press the
4
To move from one Step to another, press the
you to enter the step number. Use the numeric keypad to type the number, then
press the
To save the changes to the method you can store it. For information on storing the
method, see the "Storing a Method" topic later in this chapter.
Press the
4 - 12
key.
enter
key to go back to the Method Screen.
return
to display the Method Edit Screen. This
EDIT
softkey. The detector displays a one step
NEW
key to move from field to field. Make
enter
key, or the right arrow key.
enter
softkey. The detector prompts
STEP
Creating a New Method