PerkinElmer 200 UV/VIS Series User Manual page 98

Using Method Mode
To edit a stored method, press F6
1
similar to the one below, appears.
caret
Message line
Scroll the list until the method you wish to edit is next to the caret (>).
2
Press F1
3
changes to the control parameters. For more information, see the Editing the Current
Method section earlier in this chapter.
To store the changes under a new method number and name, press F6
4
within the Edit Screen and follow the procedure described in the Storing a Method
section in this chapter.
4 - 18
MAIN METHOD SCREEN
DIR
DIRECTORY SCREEN
F1
and the following Edit Screen appears. Edit the method by making
EDIT
METHOD EDIT SCREEN
F6
from the Main Screen. The Directory Screen,
F6
Editing a Stored Method
from
STOR