PerkinElmer 200 UV/VIS Series User Manual page 119

Setting Configuration Options
Adjusting the Computer Output
The computer output value sets the number of volts per absorbance unit. You need to match
the output from the detector to your data handling system. Refer to the operating manual for
your data handling system to identify the required voltage.
ANALOG OUTPUT SCREEN
Use the cursor arrow keys to navigate to the COMPUTER OUTPUT field. Select one of the
1
following softkeys to change the value in the field:
softkeys indicate volts per absorbance unit.
To accept and save the change(s) and return to the Instrument Setup Screen, press
2
the key.
return
To cancel changes and return to the Instrument Setup Screen press the
Configuring the Detector
, , . The values on the
0.2 0.5 1.0
quit
key.
6 - 9