PerkinElmer 200 UV/VIS Series User Manual page 121

Setting Configuration Options
Setting the System Clock
If the default time or date set on the system clock is not correct for your time zone, you can
use the System Clock Screen to change the date or time. The system clock is also used to
time stamp errors that appear in the error log. When you press the CLK softkey, the Detec-
tor displays the System Clock Screen.
From the Instrument Setup Screen, press F4
1
To set the day, press F1
2
Use the numeric keys to enter the new day.
To move to the month character field ("15") in DATE, press F2
keys to enter the new month. Set the year and the hour and minute values in the same way,
that is, by pressing the appropriate function and using the numeric keys to enter the new val-
ues.
To accept and save the change(s) and return to the Instrument Setup Screen, press
3
the key.
return
To cancel changes and return to the Instrument Setup Screen press the
SYSTEM CLOCK SCREEN
F1 F2 F3
. The first character field in DATE ("12") becomes highlighted.
DAY
Configuring the Detector
to move to the System Clock Screen.
CLK
F6 F7
and use the numeric
MNTH
key.
quit
6 - 11