Diagnostic Tests For Service Use - PerkinElmer 200 UV/VIS Series User Manual

Setting Configuration Options

Diagnostic Tests for Service Use

This section describes how to access the diagnostic tests available on the Detector. When you
select the DIAG softkey from the Configure menu, the Detector displays the Diagnostics
Screen. The Diagnostics Screen displays options for Operational and Hardware diagnostics.
The tests assess the electronic and mechanical performance of the Detector. This section
describes only how to access these options. For more information on detector diagnostics,
contact your PerkinElmer service representative.
From the Main Screen, press F7
1
Press F2
2
To return to the Configure Screen, press the
3
These tests are for service use only. Running
certain tests may delete all methods,
sequences, and configuration parameters
and returns the instrument to its factory
defaults.
MAIN SCREEN
CNFG
CONFIGURE SCREEN
F2
to move to the Diagnostics Screen.
DIAG
to move to the Configure Screen.
key.
quit
Configuring the Detector
F7
6 - 15