Procedure For Defining A Sequence - PerkinElmer 200 UV/VIS Series User Manual

Using Sequences

Procedure for Defining a Sequence

Press F5
1
Method Number for SET 1 is highlighted. A Set indicates the method number and the
number of injections. A sequence may contain up to 20 Sets. When a Set is high-
lighted, you can change the method number and the number of injections.
Message line
To change the default method for SET 1, use the numeric keys to type in a new method
2
number.
To change the number of injections for the SET, press the right arrow key to move to the
INJ field and enter the number. The number of injections indicates the number of times
to run the method.
To create another SET, press either the
If you do not want to create another SET, press the
name of the method you typed in will be accepted and you will return to the Main Method
Screen.
To move from one Step to another, press the
enter the Set number. Use the numeric keypad to type the number, then press the
key. Alternatively, you can press the up arrow or down arrow key to move from one Step
to another.
5 - 6
METHOD SCREEN
from the Main Method Screen to go to the Sequence Screen. The
SEQ
SEQUENCE SCREEN
F5
key, the right arrow key, or the
enter
key and the number and
return
softkey. The detector prompts you to
SET
Defining a Sequence
key.
insert
enter