Using The Keyboard And Display - PerkinElmer 200 UV/VIS Series User Manual

Using the Keyboard and Display

Getting Started with the Detector
Using the Keyboard and Display
The UV/VIS Detector keyboard and Liquid Crystal Display (LCD) are located on the front
panel of the instrument as shown in the figure below. You configure the UV/VIS Detector
and define all of your methods by filling in information on the screens that appear in the
LCD. You use the keys on the keyboard to enter the information on the screens and also to
start or stop certain operations on the UV/VIS Detector. As you move from one screen to
another, the screen defined function keys change. The functions of the various keys are sum-
marized in Table 1-1 on the next page.
You access all of the UV/VIS Detector screens starting at the top level Main Screen, shown
in the LCD in Figure 1-4. The general hierarchy of the UV/VIS Detector screens are shown
in the screen hierarchy diagram in Figure 1-5.
Backlit Liquid Crystal Display
Screen
PRTY
Function Keys
Keyboard
Screen-defined function keys
Figure 1-4. Keyboard and Display.
1 - 9