Prism System - Topcon ES-62 Instruction Manual

23

PRISM SYSTEM

Arrangement according to your needs is possible.
Pole adaptor- A
• Plug-4 is necessary for the tribrach adaptor-2, tribrach adaptor-S2 and pole adaptor-F2 to coincide
with the height of this series.
Use the above prisms after setting them at the same height as the instruments. To adjust the height
of prism set, change the position of fixing screws.
• During a traverse observavtion, it is recommended to use the same type (tribrach-TR-102/103/112)
of tribrach for the target.
Tilting prism holder-2
with target plate-2
Pole adaptor- F2
Tribrach TR-102/103
Target pole-2
Prism-2
Tilting prism
holder-3
Plug-4
Tribrach
adaptor-2
Optical plummet tribrach TR-112
Tilt single prism unit
Tripod
23-1
23 PRISM SYSTEM
Single prism
holder-2
Tribrach
adaptor-S2