Setout Road - Topcon ES-62 Instruction Manual

6.6.6 Setout Road

To setout the road, carry out the following operating procedure.
Operating procedure
1
After pressing the {MENU} key, press the {F4} (P
{F2}, {F4}key to get the programs menu on page 2/
2.
2
Press the {F3}, {F2}, {F2} key.

( Refer to "Set out road" on page 6-26.)
3
Input data.
4
Press the {ENT} key.
5
Select offset.
(Example: RIGHT)
Press the {F2} key. *1)
6
Input the offset value.
7
Press the {ENT} key.
The setout point coordinates are displayed.
8
Press the {F3} (YES) key.
The distance to the setout point and the backsight
are displayed.
HR: Calculated horizontal angle of the layout point
HD: Calculated horizontal distance from the
instrument to the layout point
9
Press the {F1} (ANG) key.
CHAIN: Layout point
HR: Measured (Actual) horizontal angle.
dHR: Horizontal angle to be turned to the layout
point = Actual horizontal angle - Calculated
horizontal angle.
Correct direction when dHR = 0°00'00"
10
Press the {F1} (DIST) key.
HD: Measuring (Actual) horizontal distance
dHD: Horizontal distance to be turned to the
layout point = Actual horizontal distance –
Calculated horizontal distance.
Operation
),
↓
{MENU}
PROGRAMS
{F4}
{F2}
{F4}
{F3}
SETOUT ROAD
{F2}
{F2}
Input
SETOUT ROAD
data
{ENT}
LEFT RIGHT --- ENTER
{F2}
Input
offset value
{ENT}
{F3}
ANGLE DIST
{F1}
dHR:
DIST
{F1}
dHD:
MODE
6-35
6 SPECIAL MODE (Menu Mode)
Display
F1:AREA
F2:POINT TO LINE
F3:ROAD
CHAIN=
--- --- [CLR] [ENT]
CHAIN=1200
--- --- [CLR] [ENT]
CHAIN:1200
> CENTER
CHAIN:1200
: RIGHT
= m
--- --- [CLR][ENT]
CHAIN:1200
N : 0.000 m
E : 0.000 m
>OK ? [YES][NO]
CALCULATED
HR= 60°00'00"
HD= 100.000 m
---
CHAIN:1200
HR: 60°00'00"
0°00'00"
--- NEZ
HD* 100.000 m
0.000 m
NEZ NP/P NEXT
2/2
P↓
---
---