Topcon ES-62 Instruction Manual page 9

• Use a vinyl or plastic cover to protect the instrument from rain and moisture. Metallic materials should not
be used.
Reduced range due to atmospheric conditions

• The radio waves used by the ES may be absorbed or scattered by rain, fog, and moisture from the
human body with the limit of usable range becoming lower as a result. Similarly, usable range may also
shorten when performing communication in wooded areas. Moreover, as wireless devices lose signal
strength when close to the ground, perform communication at as high a position as possible.

• TOPCON CORPORATION cannot guarantee full compatibility with all Bluetooth products on the market.
Exporting this product (Relating EAR)
This product is equipped with the parts/units, and contains software/technology, which are subject to the EAR
(Export Administration Regulations). Depending on countries you wish to export or bring the product to, a US
export license may be required. In such a case, it is your responsibility to obtain the license. The countries
requiring the license as of May 2013 are shown below. Please consult the Export Administration Regulations as
they are subject to change.
North Korea
Iran
Syria
Sudan
Cuba
URL for the EAR of the US: http://www.bis.doc.gov/policiesandregulations/ear/index.htm
Exporting this product (Relating telecommunications regulations)
Wireless communication module is incorporated in the instrument. Use of this technology must be compliant
with telecommunications regulations of the country where the instrument is being used.
Even exporting the wireless communication module may require conformity with the regulations.
Contact your local dealer in advance.
Exceptions from Responsibility
• The user of this product is expected to follow all operating instructions and make periodic checks (hardware
only) of the product's performance.
• The manufacturer, or its representatives, assumes no responsibility for results of faulty or intentional usage
or misuse including any direct, indirect, consequential damage, or loss of profits.
• The manufacturer, or its representatives, assumes no responsibility for consequential damage, or loss of
profits due to any natural disaster, (earthquake, storms, floods etc.), fire, accident, or an act of a third party
and/or usage under unusual conditions.
• The manufacturer, or its representatives, assumes no responsibility for any damage (change of data, loss of
data, loss of profits, an interruption of business etc.) caused by use of the product or an unusable product.
• The manufacturer, or its representatives, assumes no responsibility for any damage, and loss of profits
caused by usage different to that explained in the instruction manual.
• The manufacturer, or its representatives, assumes no responsibility for damage caused by incorrect
operation, or action resulting from connecting to other products.
viii