To View Coordinate Data - Topcon ES-62 Instruction Manual

3
Select a coordinate point to delete with {F1} or
{F2} (Arrow) key, or enter a coordinate point
directly.
4
Set with {ENT} key.
5
When deleting data, there will be a verification
procedure. Selecting {F3} (YES) here will delete
the coordinate data selected.

19.5.3To View Coordinate Data

Operating procedure
1
Select {F3} (VIEW POINT).
2
Select type of data to view.
{F1} (DESIGN PT)
•••••• Coordinate data entered directly and
recorded for addition of coordinates
{F2} (MEASUREMENT PT)
•••••• Coordinate data observed and recorded
through layout, TOPO, etc.
3
Select a coordinate point to view with {F1} or {F2}
(Arrow) key.
4
To check the coordinate data, press {F4} (NEZ).
5
Pressing {F4} (PT#) will return to the coordinate
point display.
Enter/
ENTER PT TO DEL
Select PT#
PT#:
DESC:
{ENT}
ENTER PT TO DEL
PT#:
DESC:
>OK ?
{F3}
1.DESIGN PT
2.MEASUREMENT PT
Operation
1.ADD POINT
2.DELETE POINT
3.VIEW POINT
{F3}
1.DESIGN PT
2.MEASUREMENT PT
{F1}
DESIGN PT
or
PT#:
{F2}
DESC:
Enter/
DESIGN PT
Select PT#
PT#:
DESC:
{F4}
{F4}
DESIGN PT
PT#:
DESC:
19-21
19 TOP FIELD MODE
[P01_
[
↑ ↓
ALP CLR
[P01
[
[YES][NO]
POINT
DELETED!
[1] [2]
Display
[1] [2] [3]
[1] [2]
[P01
[POINT
↑ ↓
NEZ
[P99
[POINT
↑ ↓
NEZ
N [ 0.000 ]
E [ 0.000 ]
Z [ 0.000 ]
↑ ↓
PT#
[P99
[POINT
↑ ↓
NEZ
]
]
]
]
↓
]
]
]
]
]
]