Setting Illumination Of Display And Cross Hairs - Topcon ES-62 Instruction Manual

3
Press the {F3} (YES) key.
4
Enter Elevation. *1)
5
Enter Scale Factor in the same way.
Grid Factor is displayed for 1 to 2 second and
display returns to menu.

*1) Refer to Section 2.4 "How to Enter Alphanumeric Characters".
 Input Range:Elevation
Scale Factor: 0.990000 to 1.010000

6.3 Setting Illumination of Display and Cross Hairs

Setting ON/OFF/LEVEL (1 to 5) for illumination of display (LCD) and reticle.
Setting LEVEL (1 to 5) is only for reticle.
[Example setting] LEVEL:2 and turn on the illumination.
Operating procedure
1
After pressing the {MENU} key, press the {F4}
(P ) key twice to get the menu on page 3.
↓
2
Press the {F1} key.
The data previously set is shown.
3
Press the {F3} (LEVEL) key.
4
Press the {F2} ( ↑ ) key, and then press the {F4}
(ENTER) key.
5
Press the {F1} (ON) key.
 To return to previous mode, press the {ESC} key.
Press the {F4} (ENT) key.
: –9,999 to 9,999 meter (–32,805 to 3,2805 ft, ft+in)
{F3}
GRID FACTOR
--- --- [CLR] [ENT]
Enter ELEV.
{F4}
Enter Scale
GRID FACTOR
{F4}
--- --- [CLR] [ENT]
GRID FACTOR
Operation
{MENU}
MENU
{F4}
{F4}
{F1}
ILLUMINATION [OFF:1]
{F3}
ILLUMINATION [OFF:1]
{F2}
{F4}
ILLUMINATION [OFF:2]
{F1}
ILLUMINATION [ON:2]
6-17
6 SPECIAL MODE (Menu Mode)
ELEV.=1000 m
SCALE:0.999000
ELEV.:2000 m
SCALE=1.001000
=1.000686
Display
F1:ILLUMINATION
F2:PARAMETERS 1
F3:PARAMETERS 2 P
F1:ON
F2:OFF
F3:LEVEL
[LEVEL MODE]
↓ ↑
––– ENTER
F1:ON
F2:OFF
F3:LEVEL
F1:ON
F2:OFF
F3:LEVEL
3/4
↓