Topcon ES-62 Instruction Manual page 96

 Data collect menu operation
By pressing the {MENU} key, the instrument will be in MENU 1/3 mode.
Press the {F2} (DATA COLLECT) key, the menu of data collect 1/2 will be shown.
Normal measurement mode
{ESC}
{MENU}
MENU
F1:TOP FIELD
F2:DATA COLLECT
F3:LAYOUT
{F2}
SELECT A FILE
FN:
INPUT LIST ––– ENTER
Set file
DATA COLLECT
F1:OCC.PT# INPUT
F2:BACKSIGHT
F3:FS/SS
DATA COLLECTION MENU 1/2
{F4}
DATA COLLECT
F1:SELECT A FILE
F2:PCODE INPUT
F3:CONFIG.
DATA COLLECTION MENU 2/2
1/4
↓
P
Selecting data collection file
1/2
{ESC} {F1}
↓
P
{F2}
{F3}
2/2
{ESC} {F1}
P ↓
{F2}
{F3}
7-2
OCC.PT# INPUT
Setting occupied point

See Section 7.1.3 "Occupied Point and
Backsight Point".
BACKSIGHT
Setting direction angle

See Section 7.1.3 "Occupied Point and
Backsight Point".
FS/SS
Executing data collection

See section 7.2 "Operational Procedure of
DATA COLLECT"
SELECT A FILE
File can be selected for Data collect.

See Section 7.1.1 "Selecting a File for
Data Collection".
PCODE INPUT
Editing PCODE library

See Section 7.6 "Editing PCODE Library
[PCODE INPUT]"
CONFIG
Setting Parameter of Data Collect

See Section 7.7 "Setting Parameter of
Data Collect [CONFIG.]".
7 DATA COLLECTION