Application Measurement (Programs); Remote Elevation Measurement (Rem) - Topcon ES-62 Instruction Manual

6.1 Application Measurement (PROGRAMS)

6.1.1 Remote Elevation measurement (REM)

To obtain elevation of the point at which setting the target prism is not possible, place the prism at any
point on the vertical line from the target then carry out REM procedure as follows.
Instrument
1) With prism height (h) input (Example:h=1.5m)
Operating procedure
1
After pressing the {MENU} key, press the {F4}
(P ) key to get the menu on page 2.
↓
2
Press the {F2} key.
3
Press the {F1} (REM) key.
4
Press the {F1} key.
5
Enter prism height. *1)
6
Collimate prism.
7
Press the {F1} (MEAS) key.
Measuring starts.
Target K
Prism
Prism height
Operation
{MENU}
{F4}
{F2}
{F1}
{F1}
Enter R.HT
{F4}
Collimate P
{F1}
6-2
6 SPECIAL MODE (Menu Mode)
Display
MENU
F1:MEMORY MGR.
F2:PROGRAMS
F3:GRID FACTOR
PROGRAMS
F1:REM
F2:MLM
F3:Z COORD.
REM
F1:INPUT R.HT
F2:NO R.HT
REM-1
<STEP-1>
R.HT = 0.000 m
--- --- [CLR] [ENT]
REM-1
<STEP-2>
HD:
MEAS ––– NP/P
REM-1
<STEP-2>
HD*[n] << m
>Measuring...
2/4
↓
P
1/2
↓
P
m
–––