PROCEDURE: Centering with the laser plummet (Option)
1
Set up the tripod and affix the instrument on the tripod
head.
"PROCEDURE: Centering with the optical plummet
eyepiece" steps 1 and 2
2
Press {ON} to power on
See Section 2.1 "Power Switch Key ON".
•
The circular level is displayed on the screen.
3
Press {F1} to display observation screen.
4
Press {} to display star key menu, and then press
{F1}.
The laser plummet beam will be emitted from the bottom
of the instrument.
5
Use {} / {} to adjust the brightness of the laser.
6
Adjust the levelling foot screws to align the laser beam
with the center the survey point.
7
Press {F1} to turn the laser plummet off.
8
Continue to the levelling procedure.
See Section 2.5.2 "Levelling".
•
Visibility of the laser spot may be affected when operating in direct sunlight. In this event, provide
shade for the survey point.
2 PREPARATION FOR MEASUREMENT
EXIT
V :
HR:
0SET
V :
HR:
0SET
V :
HR:
0SET
2-9
X
X -3'20"
Y
3'40"
90°10'20"
120°30'40"
HOLD HSET
P1
90°10'20"
120°30'40"
HOLD HSET
P1
90°10'20"
120°30'40"
HOLD HSET
P1
Y
↓
↓
↓